naginterfaces.library.sparse.complex_gen_basic_setup¶
- naginterfaces.library.sparse.complex_gen_basic_setup(n, method='BICGSTAB', precon='P', norm=None, weight='N', iterm=1, m=None, tol=0.0, maxitn=20, anorm=0.0, sigmax=0.0, monit=0)[source]¶
complex_gen_basic_setup
is a setup function, the first in a suite of three functions for the iterative solution of a complex general (non-Hermitian) system of simultaneous linear equations.complex_gen_basic_setup
must be called beforecomplex_gen_basic_solver()
, the iterative solver. The third function in the suite,complex_gen_basic_diag()
, can be used to return additional information about the computation.These three functions are suitable for the solution of large sparse general (non-Hermitian) systems of equations.
For full information please refer to the NAG Library document for f11br
https://www.nag.com/numeric/nl/nagdoc_28.7/flhtml/f11/f11brf.html
- Parameters
- nint
, the order of the matrix .
- methodstr, optional
The iterative method to be used.
Restarted generalized minimum residual method.
Conjugate gradient squared method.
Bi-conjugate gradient stabilized () method.
Transpose-free quasi-minimal residual method.
- preconstr, length 1, optional
Determines whether preconditioning is used.
No preconditioning.
Preconditioning.
- normNone or str, length 1, optional
Note: if this argument is None then a default value will be used, determined as follows: if : ; otherwise: .
Defines the matrix and vector norm to be used in the termination criteria.
norm.
norm.
norm.
- weightstr, length 1, optional
Specifies whether a vector of user-supplied weights is to be used in the computation of the vector norms required in termination criterion (2) (): , where , for . The suffix denotes the vector norm used, as specified by the argument . Note that weights cannot be used when , i.e., when criterion (3) is used.
User-supplied weights are to be used and must be supplied on initial entry to
complex_gen_basic_solver()
.All weights are implicitly set equal to one. Weights do not need to be supplied on initial entry to
complex_gen_basic_solver()
.- itermint, optional
Defines the termination criterion to be used.
Use the termination criterion defined in (2).
Use the termination criterion defined in (3).
- mNone or int, optional
Note: if this argument is None then a default value will be used, determined as follows: if : ; if : ; otherwise: .
If , is the dimension of the restart subspace.
If , is the order of the polynomial BI-CGSTAB method.
Otherwise, is not referenced.
- tolfloat, optional
The tolerance for the termination criterion. If is used, where is the machine precision. Otherwise is used.
- maxitnint, optional
The maximum number of iterations.
- anormfloat, optional
If , the value of to be used in the termination criterion (2) ().
If , and or , then is estimated internally by
complex_gen_basic_solver()
.If , is not referenced.
- sigmaxfloat, optional
If , the largest singular value of the preconditioned iteration matrix; otherwise, is not referenced.
If , and , the value of will be estimated internally.
- monitint, optional
If , the frequency at which a monitoring step is executed by
complex_gen_basic_solver()
: if or , a monitoring step is executed every iterations; otherwise, a monitoring step is executed every super-iterations (groups of up to or iterations for RGMRES or BI-CGSTAB(), respectively).There are some additional computational costs involved in monitoring the solution and residual vectors when the BI-CGSTAB() method is used with .
- Returns
- commdict, communication object
Communication structure.
- Raises
- NagValueError
- (errno )
On entry, and .
Constraint: .
- (errno )
On entry, , and .
Constraint: if and or , .
- (errno )
On entry, , and .
Constraint: if and , .
- (errno )
On entry, .
Constraint: .
- (errno )
On entry, .
Constraint: .
- (errno )
On entry, , and .
Constraint: if , . If , .
- (errno )
On entry, and .
Constraint: if or , .
- (errno )
On entry, .
Constraint: .
- (errno )
On entry, and .
Constraint: if , .
- (errno )
On entry, and .
Constraint: if , .
- (errno )
On entry, and .
Constraint: if , .
- (errno )
On entry, .
Constraint: or .
- (errno )
On entry, .
Constraint: or .
- (errno )
On entry, .
Constraint: , or .
- (errno )
On entry, .
Constraint: or .
- (errno )
On entry, .
Constraint: , , or .
- (errno )
complex_gen_basic_setup
has been called out of sequence: eithercomplex_gen_basic_setup
has been called twice orcomplex_gen_basic_solver()
has not terminated its current task.
- Notes
The suite consisting of the functions
complex_gen_basic_setup
,complex_gen_basic_solver()
andcomplex_gen_basic_diag()
is designed to solve the general (non-Hermitian) system of simultaneous linear equations of order , where is large and the coefficient matrix is sparse.complex_gen_basic_setup
is a setup function which must be called beforecomplex_gen_basic_solver()
, the iterative solver. The third function in the suite,complex_gen_basic_diag()
, can be used to return additional information about the computation. A choice of methods is available:restarted generalized minimum residual method (RGMRES);
conjugate gradient squared method (CGS);
bi-conjugate gradient stabilized () method (BI-CGSTAB());
transpose-free quasi-minimal residual method (TFQMR).
Restarted Generalized Minimum Residual Method (RGMRES)
The restarted generalized minimum residual method (RGMRES) (see Saad and Schultz (1986), Barrett et al. (1994) and Dias da Cunha and Hopkins (1994)) starts from the residual , where is an initial estimate for the solution (often ). An orthogonal basis for the Krylov subspace , for , is generated explicitly: this is referred to as Arnoldi’s method (see Arnoldi (1951)). The solution is then expanded onto the orthogonal basis so as to minimize the residual norm . The lack of symmetry of implies that the orthogonal basis is generated by applying a ‘long’ recurrence relation, whose length increases linearly with the iteration count. For all but the most trivial problems, computational and storage costs can quickly become prohibitive as the iteration count increases. RGMRES limits these costs by employing a restart strategy: every iterations at most, the Arnoldi process is restarted from , where the subscript denotes the last available iterate. Each group of iterations is referred to as a ‘super-iteration’. The value of is chosen in advance and is fixed throughout the computation. Unfortunately, an optimum value of cannot easily be predicted.
Conjugate Gradient Squared Method (CGS)
The conjugate gradient squared method (CGS) (see Sonneveld (1989), Barrett et al. (1994) and Dias da Cunha and Hopkins (1994)) is a development of the bi-conjugate gradient method where the nonsymmetric Lanczos method is applied to reduce the coefficients matrix to tridiagonal form: two bi-orthogonal sequences of vectors are generated starting from the residual , where is an initial estimate for the solution (often ) and from the shadow residual corresponding to the arbitrary problem , where can be any vector, but in practice is chosen so that . In the course of the iteration, the residual and shadow residual and are generated, where is a polynomial of order , and bi-orthogonality is exploited by computing the vector product . Applying the ‘contraction’ operator twice, the iteration coefficients can still be recovered without advancing the solution of the shadow problem, which is of no interest. The CGS method often provides fast convergence; however, there is no reason why the contraction operator should also reduce the once reduced vector : this may well lead to a highly irregular convergence which may result in large cancellation errors.
Bi-Conjugate Gradient Stabilized ( ) Method (BI-CGSTAB( ))
The bi-conjugate gradient stabilized () method (BI-CGSTAB()) (see Van der Vorst (1989), Sleijpen and Fokkema (1993) and Dias da Cunha and Hopkins (1994)) is similar to the CGS method above. However, instead of generating the sequence , it generates the sequence , where the are polynomials chosen to minimize the residual after the application of the contraction operator . Two main steps can be identified for each iteration: an OR (Orthogonal Residuals) step where a basis of order is generated by a Bi-CG iteration and an MR (Minimum Residuals) step where the residual is minimized over the basis generated, by a method akin to GMRES. For , the method corresponds to the BI-CGSTAB method of Van der Vorst (1989). For , more information about complex eigenvalues of the iteration matrix can be taken into account, and this may lead to improved convergence and robustness. However, as increases, numerical instabilities may arise. For this reason, a maximum value of is imposed, but probably is sufficient in most cases.
Transpose-free Quasi-minimal Residual Method (TFQMR)
The transpose-free quasi-minimal residual method (TFQMR) (see Freund and Nachtigal (1991) and Freund (1993)) is conceptually derived from the CGS method. The residual is minimized over the space of the residual vectors generated by the CGS iterations under the simplifying assumption that residuals are almost orthogonal. In practice, this is not the case but theoretical analysis has proved the validity of the method. This has the effect of remedying the rather irregular convergence behaviour with wild oscillations in the residual norm that can degrade the numerical performance and robustness of the CGS method. In general, the TFQMR method can be expected to converge at least as fast as the CGS method, in terms of number of iterations, although each iteration involves a higher operation count. When the CGS method exhibits irregular convergence, the TFQMR method can produce much smoother, almost monotonic convergence curves. However, the close relationship between the CGS and TFQMR method implies that the overall speed of convergence is similar for both methods. In some cases, the TFQMR method may converge faster than the CGS method.
General Considerations
For each method, a sequence of solution iterates is generated such that, hopefully, the sequence of the residual norms converges to a required tolerance. Note that, in general, convergence, when it occurs, is not monotonic.
In the RGMRES and BI-CGSTAB() methods above, your program must provide the maximum number of basis vectors used, or , respectively; however, a smaller number of basis vectors may be generated and used when the stability of the solution process requires this (see Further Comments).
Faster convergence can be achieved using a preconditioner (see Golub and Van Loan (1996) and Barrett et al. (1994)). A preconditioner maps the original system of equations onto a different system, say
with, hopefully, better characteristics with respect to its speed of convergence: for example, the condition number of the coefficients matrix can be improved or eigenvalues in its spectrum can be made to coalesce. An orthogonal basis for the Krylov subspace , for , is generated and the solution proceeds as outlined above. The algorithms used are such that the solution and residual iterates of the original system are produced, not their preconditioned counterparts. Note that an unsuitable preconditioner or no preconditioning at all may result in a very slow rate, or lack, of convergence. However, preconditioning involves a trade-off between the reduction in the number of iterations required for convergence and the additional computational costs per iteration. Also, setting up a preconditioner may involve non-negligible overheads.
A left preconditioner can be used by the RGMRES, CGS and TFQMR methods, such that in (1), where is the identity matrix of order ; a right preconditioner can be used by the BI-CGSTAB() method, such that . These are formal definitions, used only in the design of the algorithms; in practice, only the means to compute the matrix–vector products and (the latter only being required when an estimate of or is computed internally), and to solve the preconditioning equations are required, i.e., explicit information about , or its inverse is not required at any stage.
The first termination criterion
is available for all four methods. In (2), , and denotes a user-specified tolerance subject to , , where is the machine precision. Facilities are provided for the estimation of the norm of the coefficients matrix or , when this is not known in advance, by applying Higham’s method (see Higham (1988)). Note that cannot be estimated internally. This criterion uses an error bound derived from backward error analysis to ensure that the computed solution is the exact solution of a problem as close to the original as the termination tolerance requires. Termination criteria employing bounds derived from forward error analysis are not used because any such criteria would require information about the condition number which is not easily obtainable.
The second termination criterion
is available for all methods except TFQMR. In (3), is the largest singular value of the (preconditioned) iteration matrix . This termination criterion monitors the progress of the solution of the preconditioned system of equations and is less expensive to apply than criterion (2) for the BI-CGSTAB() method with . Only the RGMRES method provides facilities to estimate internally, when this is not supplied (see Further Comments).
Termination criterion (2) is the recommended choice, despite its additional costs per iteration when using the BI-CGSTAB() method with . Also, if the norm of the initial estimate is much larger than the norm of the solution, that is, if , a dramatic loss of significant digits could result in complete lack of convergence. The use of criterion (2) will enable the detection of such a situation, and the iteration will be restarted at a suitable point. No such restart facilities are provided for criterion (3).
Optionally, a vector of user-specified weights can be used in the computation of the vector norms in termination criterion (2), i.e., , where , for . Note that the use of weights increases the computational costs.
The sequence of calls to the functions comprising the suite is enforced: first, the setup function
complex_gen_basic_setup
must be called, followed by the solvercomplex_gen_basic_solver()
.complex_gen_basic_diag()
can be called either whencomplex_gen_basic_solver()
is carrying out a monitoring step or aftercomplex_gen_basic_solver()
has completed its tasks. Incorrect sequencing will raise an error condition.In general, it is not possible to recommend one method in preference to another. RGMRES is often used in the solution of systems arising from PDEs. On the other hand, it can easily stagnate when the size of the orthogonal basis is too small, or the preconditioner is not good enough. CGS can be the fastest method, but the computed residuals can exhibit instability which may greatly affect the convergence and quality of the solution. BI-CGSTAB() seems robust and reliable, but it can be slower than the other methods: if a preconditioner is used and , BI-CGSTAB() computes the solution of the preconditioned system : the preconditioning equations must be solved to obtain the required solution. The algorithm employed limits to or less, when no intermediate monitoring is requested, the number of times the preconditioner has to be thus applied compared with the total number of applications of the preconditioner. TFQMR can be viewed as a more robust variant of the CGS method: it shares the CGS method speed but avoids the CGS fluctuations in the residual, which may give rise to instability. Also, when the termination criterion (2) is used, the CGS, BI-CGSTAB() and TFQMR methods will restart the iteration automatically when necessary in order to solve the given problem.
- References
Arnoldi, W, 1951, The principle of minimized iterations in the solution of the matrix eigenvalue problem, Quart. Appl. Math. (9), 17–29
Barrett, R, Berry, M, Chan, T F, Demmel, J, Donato, J, Dongarra, J, Eijkhout, V, Pozo, R, Romine, C and Van der Vorst, H, 1994, Templates for the Solution of Linear Systems: Building Blocks for Iterative Methods, SIAM, Philadelphia
Dias da Cunha, R and Hopkins, T, 1994, PIM 1.1 — the parallel iterative method package for systems of linear equations user’s guide — Fortran 77 version, Technical Report, Computing Laboratory, University of Kent at Canterbury, Kent, UK
Freund, R W, 1993, A transpose-free quasi-minimal residual algorithm for non-Hermitian linear systems, SIAM J. Sci. Comput. (14), 470–482
Freund, R W and Nachtigal, N, 1991, QMR: a Quasi-Minimal Residual Method for Non-Hermitian Linear Systems, Numer. Math. (60), 315–339
Golub, G H and Van Loan, C F, 1996, Matrix Computations, (3rd Edition), Johns Hopkins University Press, Baltimore
Higham, N J, 1988, FORTRAN codes for estimating the one-norm of a real or complex matrix, with applications to condition estimation, ACM Trans. Math. Software (14), 381–396
Saad, Y and Schultz, M, 1986, GMRES: a generalized minimal residual algorithm for solving nonsymmetric linear systems, SIAM J. Sci. Statist. Comput. (7), 856–869
Sleijpen, G L G and Fokkema, D R, 1993, BiCGSTAB for linear equations involving matrices with complex spectrum, ETNA (1), 11–32
Sonneveld, P, 1989, CGS, a fast Lanczos-type solver for nonsymmetric linear systems, SIAM J. Sci. Statist. Comput. (10), 36–52
Van der Vorst, H, 1989, Bi-CGSTAB, a fast and smoothly converging variant of Bi-CG for the solution of nonsymmetric linear systems, SIAM J. Sci. Statist. Comput. (13), 631–644