The function may be called by the names: g04gac or nag_anova_icc.
3Description
Many scientific investigations involve assigning a value (score) to a number of objects of interest (subjects). In most instances the method used to score the subject will be affected by measurement error which can affect the analysis and interpretation of the data. When the score is based on the subjective opinion of one or more individuals (raters) the measurement error can be high and, therefore, it is important to be able to assess its magnitude. One way of doing this is to run a reliability study and calculate the intraclass correlation (ICC).
In a typical reliability study each of a random sample of ${n}_{s}$ subjects are scored, independently, by ${n}_{r}$ raters. Each rater scores the same subject $m$ times (i.e., there are $m$ replicate scores). The scores, ${y}_{\mathit{i}\mathit{j}\mathit{k}}$, for $\mathit{i}=1,2,\dots ,{n}_{s}$, $\mathit{j}=1,2,\dots ,{n}_{r}$ and $\mathit{k}=1,2,\dots ,m$ can be arranged into $m$ data tables, with the ${n}_{s}$ rows of the table, labelled $1,2,\dots ,{n}_{s}$, corresponding to the subjects and the ${n}_{r}$ columns of the table, labelled $1,2,\dots ,{n}_{r}$, to the raters. For example the following data, taken from Shrout and Fleiss (1979), shows a typical situation where four raters (${n}_{r}=4$) have scored six subjects (${n}_{s}=6$) once, i.e., there has been no replication ($m=1$).
Rater
Subject
$1$
$2$
$3$
$4$
$1$
$9$
$2$
$5$
$8$
$2$
$6$
$1$
$3$
$2$
$3$
$8$
$4$
$6$
$8$
$4$
$7$
$1$
$2$
$6$
$5$
$10$
$5$
$6$
$9$
$6$
$6$
$2$
$4$
$7$
The term intraclass correlation is a general one and can mean either a measure of interrater reliability, i.e., a measure of how similar the raters are, or intrarater reliability, i.e., a measure of how consistent each rater is.
There are a numerous different versions of the ICC, six of which can be calculated using g04gac. The different versions of the ICC can lead to different conclusions when applied to the same data, it is, therefore, essential to choose the most appropriate based on the design of the reliability study and whether inter- or intrarater reliability is of interest. The six measures of the ICC are split into three different types of studies, denoted: $\text{ICC}(1,1)$, $\text{ICC}(2,1)$ and $\text{ICC}(3,1)$. This notation ties up with that used by Shrout and Fleiss (1979). Each class of study results in two forms of the ICC, depending on whether inter- or intrarater reliability is of interest.
3.1$\text{ICC}(1,1)$: One-Factor Design
The one-factor designs differ, depending on whether inter- or intrarater reliability is of interest:
3.1.1Interrater reliability
In a one-factor design to measure interrater reliability, each subject is scored by a different set of raters randomly selected from a larger population of raters. Therefore, even though they use the same set of labels each row of the data table is associated with a different set of raters.
A model of the following form is assumed:
$${y}_{ijk}=\mu +{s}_{i}+{\epsilon}_{ijk}$$
where ${s}_{i}$ is the subject effect and ${\epsilon}_{ijk}$ is the error term, with ${s}_{i}\sim N(0,{\sigma}_{s}^{2})$ and ${\epsilon}_{ijk}\sim N(0,{\sigma}_{\epsilon}^{2})$.
The measure of the interrater reliability, $\rho $, is then given by:
where ${\hat{\sigma}}_{s}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{s}$ and ${\sigma}_{\epsilon}$ respectively.
3.1.2Intrarater reliability
In a one-factor design to measure intrarater reliability, each rater scores a different set of subjects. Therefore, even though they use the same set of labels, each column of the data table is associated with a different set of subjects.
A model of the following form is assumed:
$${y}_{ijk}=\mu +{r}_{j}+{\epsilon}_{ijk}$$
where ${r}_{i}$ is the rater effect and ${\epsilon}_{ijk}$ is the error term, with ${r}_{j}\sim N(0,{\sigma}_{r}^{2})$ and ${\epsilon}_{ijk}\sim N(0,{\sigma}_{\epsilon}^{2})$.
The measure of the intrarater reliability, $\gamma $, is then given by:
where ${\hat{\sigma}}_{r}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{r}$ and ${\sigma}_{\epsilon}$ respectively.
3.2$\text{ICC}(2,1)$: Random Factorial Design
In a random factorial design, each subject is scored by the same set of raters. The set of raters have been randomly selected from a larger population of raters.
where ${s}_{i}$ is the subject effect, ${r}_{i}$ is the rater effect, ${\left(sr\right)}_{ij}$ is the subject-rater interaction effect and ${\epsilon}_{ijk}$ is the error term, with ${s}_{i}\sim N(0,{\sigma}_{s}^{2})$, ${r}_{j}\sim N(0,{\sigma}_{r}^{2})$, ${\left(sr\right)}_{ij}\sim N(0,{\sigma}_{sr}^{2})$ and ${\epsilon}_{ijk}\sim N(0,{\sigma}_{\epsilon}^{2})$.
3.2.1Interrater reliability
The measure of the interrater reliability, $\rho $, is given by:
where ${\hat{\sigma}}_{s}$, ${\hat{\sigma}}_{r}$, ${\hat{\sigma}}_{sr}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{s}$, ${\sigma}_{r}$, ${\sigma}_{sr}$ and ${\sigma}_{\epsilon}$ respectively.
3.2.2Intrarater reliability
The measure of the intrarater reliability, $\gamma $, is given by:
where ${\hat{\sigma}}_{s}$, ${\hat{\sigma}}_{r}$, ${\hat{\sigma}}_{sr}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{s}$, ${\sigma}_{r}$, ${\sigma}_{sr}$ and ${\sigma}_{\epsilon}$ respectively.
3.3$\text{ICC}(3,1)$: Mixed Factorial Design
In a mixed factorial design, each subject is scored by the same set of raters and these are the only raters of interest.
where ${s}_{i}$ is the subject effect, ${r}_{i}$ is the fixed rater effect, ${\left(sr\right)}_{ij}$ is the subject-rater interaction effect and ${\epsilon}_{ijk}$ is the error term, with ${s}_{i}\sim N(0,{\sigma}_{s}^{2})$, ${\Sigma}_{j=1}^{{n}_{r}}{r}_{j}=0$, ${\left(sr\right)}_{ij}\sim N(0,{\sigma}_{sr}^{2})$, ${\Sigma}_{j=1}^{{n}_{r}}{\left(sr\right)}_{ij}=0$ and ${\epsilon}_{ijk}\sim N(0,{\sigma}_{\epsilon}^{2})$.
3.3.1Interrater reliability
The measure of the interrater reliability, $\rho $, is then given by:
where ${\hat{\sigma}}_{s}$, ${\hat{\sigma}}_{sr}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{s}$, ${\sigma}_{sr}$ and ${\sigma}_{\epsilon}$ respectively.
3.3.2Intrarater reliability
The measure of the intrarater reliability, $\gamma $, is then given by:
where ${\hat{\sigma}}_{s}$, ${\hat{\sigma}}_{sr}$ and ${\hat{\sigma}}_{\epsilon}$ are the estimated values of ${\sigma}_{s}$, ${\sigma}_{sr}$ and ${\sigma}_{\epsilon}$ respectively.
As well as an estimate of the ICC, g04gac returns an approximate $(1-\alpha )\%$ confidence interval for the ICC and an $F$-statistic, $f$, associated degrees of freedom (${\nu}_{1}$ and ${\nu}_{2}$) and p-value, $p$, for testing that the ICC is zero.
Details on the formula used to calculate the confidence interval, $f$, ${\nu}_{1}$, ${\nu}_{2}$, ${\hat{\sigma}}_{s}^{2}$, ${\hat{\sigma}}_{r}^{2}$, ${\hat{\sigma}}_{sr}^{2}$ and ${\hat{\sigma}}_{\epsilon}^{2}$ are given in Gwet (2014). In the case where there are no missing data these should tie up with the formula presented in Shrout and Fleiss (1979).
In some circumstances, the formula presented in Gwet (2014) for calculating ${\hat{\sigma}}_{s}^{2}$, ${\hat{\sigma}}_{r}^{2}$, ${\hat{\sigma}}_{sr}^{2}$ and ${\hat{\sigma}}_{\epsilon}^{2}$ can result in a negative value being calculated. In such instances, ${\mathbf{fail}}\mathbf{.}\mathbf{code}=$NW_POTENTIAL_PROBLEM, the offending estimate is set to zero and the calculations continue as normal.
It should be noted that Shrout and Fleiss (1979) also present methods for calculating the ICC based on average scores, denoted $\text{ICC}(1,k)$, $\text{ICC}(2,k)$ and $\text{ICC}(3,k)$. These are not supplied here as multiple replications are allowed ($m>1$) hence there is no need to average the scores prior to calculating ICC when using g04gac.
4References
Gwet K L (2014) Handbook of Inter-rater Reliability Fourth Edition Advanced Analytics LLC
Shrout P E and Fleiss J L (1979) Intraclass Correlations: Uses in Assessing Rater Reliability Pyschological Bulletin, Vol 862 420–428
5Arguments
1: $\mathbf{mtype}$ – Nag_ICCModelTypeInput
On entry: indicates which model is to be used.
${\mathbf{mtype}}=\mathrm{Nag\_ICC\_1}$
The reliability study is a one-factor design, $\text{ICC}(1,1)$.
${\mathbf{mtype}}=\mathrm{Nag\_ICC\_2}$
The reliability study is a random factorial design, $\text{ICC}(2,1)$.
${\mathbf{mtype}}=\mathrm{Nag\_ICC\_3}$
The reliability study is a mixed factorial design, $\text{ICC}(3,1)$.
Constraint:
${\mathbf{mtype}}=\mathrm{Nag\_ICC\_1}$, $\mathrm{Nag\_ICC\_2}$ or $\mathrm{Nag\_ICC\_3}$.
2: $\mathbf{rtype}$ – Nag_ICCReliabilityTypeInput
On entry: indicates which type of reliability is required.
${\mathbf{rtype}}=\mathrm{Nag\_Inter}$
Interrater reliability is required.
${\mathbf{rtype}}=\mathrm{Nag\_Intra}$
Intrarater reliability is required.
Constraint:
${\mathbf{rtype}}=\mathrm{Nag\_Inter}$ or $\mathrm{Nag\_Intra}$.
3: $\mathbf{nrep}$ – IntegerInput
On entry: $m$, the number of replicates.
Constraints:
if ${\mathbf{mtype}}=\mathrm{Nag\_ICC\_2}$ or $\mathrm{Nag\_ICC\_3}$ and ${\mathbf{rtype}}=\mathrm{Nag\_Intra}$, ${\mathbf{nrep}}\ge 2$;
Note: the dimension, dim, of the array
score
must be at least
${\mathbf{nrep}}\times {\mathbf{nsubj}}\times {\mathbf{nrater}}$.
where ${\mathbf{SCORE}}(k,i,j)$ appears in this document, it refers to the array element ${\mathbf{score}}\left[(j-1)\times {\mathbf{nrep}}\times {\mathbf{nsubj}}+(i-1)\times {\mathbf{nrep}}+k-1\right]$.
On entry: the matrix of scores, with ${\mathbf{SCORE}}(k,i,j)$ being the score given to the $i$th subject by the $j$th rater in the $k$th replicate.
If rater $j$ did not rate subject $i$ at replication $k$, the corresponding element of score, ${\mathbf{SCORE}}(k,i,j)$, should be set to smiss.
7: $\mathbf{mscore}$ – Nag_MissingTypeInput
On entry: indicates how missing scores are handled.
Constraint:
${\mathbf{mscore}}=\mathrm{Nag\_NoMissing}$ or $\mathrm{Nag\_DropMissing}$.
8: $\mathbf{smiss}$ – doubleInput
On entry: the value used to indicate a missing score.
If ${\mathbf{mscore}}=\mathrm{Nag\_NoMissing}$, smiss is not referenced and need not be set.
If ${\mathbf{mscore}}=\mathrm{Nag\_DropMissing}$, the value used to indicate a missing score.
Care should be taken in the selection of the value used to indicate a missing score. g04gac will treat any score in the inclusive range $(1\pm {0.1}^{({\mathbf{nag\_decimal\_digits}}-2)})\times {\mathbf{smiss}}$ as missing. Alternatively, a NaN (Not A Number) can be used to indicate missing values, in which case the value of smiss and any missing values of score can be set through a call to x07bbc.
9: $\mathbf{alpha}$ – doubleInput
On entry: $\alpha $, the significance level used in the construction of the confidence intervals for icc.
Constraint:
$0.0<{\mathbf{alpha}}<1.0$.
10: $\mathbf{icc}$ – double *Output
On exit: an estimate of the intraclass correlation to measure either the interrater reliability, $\rho $, or intrarater reliability, $\gamma $, as specified by mtype and rtype.
11: $\mathbf{lci}$ – double *Output
On exit: an approximate lower limit for the $100(1-\alpha )\%$ confidence interval for the ICC.
12: $\mathbf{uci}$ – double *Output
On exit: an approximate upper limit for the $100(1-\alpha \%)$ confidence interval for the ICC.
In some circumstances it is possible for the estimate of the intraclass correlation to fall outside the region of the approximate confidence intervals. In these cases g04gac returns all calculated values, but raises the warning ${\mathbf{fail}}\mathbf{.}\mathbf{code}=$NW_POTENTIAL_PROBLEM.
13: $\mathbf{fstat}$ – double *Output
On exit: $f$, the $F$-statistic associated with icc.
14: $\mathbf{df1}$ – double *Output
15: $\mathbf{df2}$ – double *Output
On exit: ${\nu}_{1}$ and ${\nu}_{2}$, the degrees of freedom associated with $f$.
16: $\mathbf{pvalue}$ – double *Output
On exit: $P(F\ge f:{\nu}_{1},{\nu}_{1})$, the upper tail probability from an $F$ distribution.
17: $\mathbf{fail}$ – NagError *Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).
6Error Indicators and Warnings
NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument $\u27e8\mathit{\text{value}}\u27e9$ had an illegal value.
NE_DEGENERATE
On entry, after adjusting for missing data, ${\mathbf{nrater}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: ${\mathbf{nrater}}\ge 2$.
On entry, after adjusting for missing data, ${\mathbf{nrep}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: ${\mathbf{nrep}}\ge 1$.
On entry, after adjusting for missing data, ${\mathbf{nrep}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: when ${\mathbf{mtype}}=\mathrm{Nag\_ICC\_2}$ or $\mathrm{Nag\_ICC\_3}$ and ${\mathbf{rtype}}=\mathrm{Nag\_Intra}$, ${\mathbf{nrep}}\ge 2$.
On entry, after adjusting for missing data, ${\mathbf{nsubj}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: ${\mathbf{nsubj}}\ge 2$.
Unable to calculate the ICC due to a division by zero. This is often due to degenerate data, for example all scores being the same.
NE_INT
On entry, ${\mathbf{nrater}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: ${\mathbf{nrater}}\ge 2$.
On entry, ${\mathbf{nrep}}=\u27e8\mathit{\text{value}}\u27e9$.
Constraint: ${\mathbf{nrep}}\ge 1$.
On entry, ${\mathbf{nrep}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: when ${\mathbf{mtype}}=\mathrm{Nag\_ICC\_2}$ or $\mathrm{Nag\_ICC\_3}$ and ${\mathbf{rtype}}=\mathrm{Nag\_Intra}$, ${\mathbf{nrep}}\ge 2$.
On entry, ${\mathbf{nsubj}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: ${\mathbf{nsubj}}\ge 2$.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
NE_REAL
On entry, ${\mathbf{alpha}}=\u27e8\mathit{\text{value}}\u27e9$. alpha is too close to either zero or one. This error is unlikely to occur.
On entry, ${\mathbf{alpha}}=\u27e8\mathit{\text{value}}\u27e9$. Constraint: $0.0<{\mathbf{alpha}}<1.0$.
NW_POTENTIAL_PROBLEM
icc does not fall into the interval $[{\mathbf{lci}},{\mathbf{uci}}]$. All output quantities have been calculated.
On entry, a replicate, subject or rater contained all missing data. All output quantities have been calculated using the reduced problem size.
The estimate of at least one variance component was negative. Negative estimates were set to zero and all output quantities calculated as documented.
7Accuracy
Not applicable.
8Parallelism and Performance
Background information to multithreading can be found in the Multithreading documentation.
g04gac is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
g04gac makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.
9Further Comments
None.
10Example
This example calculates and displays the measure of interrater reliability, $\rho $, for a one-factor design, $\text{ICC}(1,1)$. In addition the $95\%$ confidence interval, $F$-statistic, degrees of freedom and p-value are presented.
The data is taken from table 2 of Shrout and Fleiss (1979), which has four raters scoring six subjects.