The function may be called by the names: e01sjc, nag_interp_dim2_triang_interp or nag_2d_triang_interp.
3Description
e01sjc constructs an interpolating surface $F(x,y)$
through a set of $m$ scattered data points $({x}_{\mathit{r}},{y}_{\mathit{r}},{f}_{\mathit{r}})$, for $\mathit{r}=1,2,\dots ,m$, using a method due to Renka and Cline. In the $(x,y)$ plane, the data points must be distinct. The constructed surface is continuous and has continuous first derivatives.
The method involves firstly creating a triangulation with all the $(x,y)$ data points as nodes, the triangulation being as nearly equiangular as possible (see Cline and Renka (1984)). Then gradients in the $x$- and $y$-directions are estimated at node $\mathit{r}$, for $\mathit{r}=1,2,\dots ,m$,
as the partial derivatives of a quadratic function of $x$
and $y$ which interpolates the data value ${f}_{r}$,
and which fits the data values at nearby nodes (those within a certain distance chosen by the algorithm) in a weighted least squares sense. The weights are chosen such that closer nodes have more influence than more distant nodes on derivative estimates at node $r$. The computed partial derivatives, with the ${f}_{r}$ values, at the three nodes of each triangle define a piecewise polynomial surface of a certain form which is the interpolant on that triangle. See Renka and Cline (1984) for more detailed information on the algorithm,
a development of that by Lawson (1977). The code is derived from Renka (1984).
The interpolant $F(x,y)$ can subsequently be evaluated at any point $(x,y)$ inside or outside the domain of the data by a call to
e01skc.
Points outside the domain are evaluated by extrapolation.
4References
Cline A K and Renka R L (1984) A storage-efficient method for construction of a Thiessen triangulation Rocky Mountain J. Math.14 119–139
Lawson C L (1977) Software for ${C}^{1}$ surface interpolation Mathematical Software III (ed J R Rice) 161–194 Academic Press
Renka R L (1984) Algorithm 624: triangulation and interpolation of arbitrarily distributed points in the plane ACM Trans. Math. Software10 440–442
Renka R L and Cline A K (1984) A triangle-based ${C}^{1}$ interpolation method Rocky Mountain J. Math.14 223–237
On entry: the coordinates of the
$\mathit{r}$th data point, for $\mathit{r}=1,2,\dots ,m$. The data points are accepted in any order, but see Section 9.
Constraint:
the $(x,y)$ nodes must not all be collinear, and each node must be unique.
Note: the $(i,j)$th element of the matrix is stored in ${\mathbf{grads}}\left[(j-1)\times 2+i-1\right]$.
On exit: the estimated partial derivatives at the nodes, in a form suitable for passing to e01skc. The derivatives at node
$\mathit{r}$ with respect to $x$ and $y$ are contained in ${\mathbf{grads}}\left[\left(\mathit{r}-1\right)\times 2\right]$ and ${\mathbf{grads}}\left[\left(\mathit{r}-1\right)\times 2+1\right]$ respectively, for $\mathit{r}=1,2,\dots ,m$.
7: $\mathbf{fail}$ – NagError *Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).
6Error Indicators and Warnings
NE_ALL_DATA_COLLINEAR
All nodes are collinear. There is no unique solution.
NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument $\u27e8\mathit{\text{value}}\u27e9$ had an illegal value.
NE_DATA_NOT_UNIQUE
On entry, $({\mathbf{x}}\left[\mathit{I}-1\right],{\mathbf{y}}\left[\mathit{I}-1\right])=({\mathbf{x}}\left[\mathit{J}-1\right],{\mathbf{y}}\left[\mathit{J}-1\right])$, for $\mathit{I},\mathit{J}=\u27e8\mathit{\text{value}}\u27e9\u27e8\mathit{\text{value}}\u27e9$, ${\mathbf{x}}\left[\mathit{I}-1\right]$, ${\mathbf{y}}\left[\mathit{I}-1\right]=\u27e8\mathit{\text{value}}\u27e9\u27e8\mathit{\text{value}}\u27e9$.
NE_INT
On entry, ${\mathbf{m}}=\u27e8\mathit{\text{value}}\u27e9$.
Constraint: ${\mathbf{m}}\ge 3$.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
7Accuracy
On successful exit, the computational errors should be negligible in most situations but you should always check the computed surface for acceptability, by drawing contours for instance. The surface always interpolates the input data exactly.
8Parallelism and Performance
Background information to multithreading can be found in the Multithreading documentation.
e01sjc is not threaded in any implementation.
9Further Comments
The time taken for a call of e01sjc is approximately proportional to the number of data points, $m$. The function is more efficient if, before entry, the values in x, y and f are arranged so that the x array is in ascending order.
10Example
This example reads in a set of $30$ data points and calls e01sjc
to construct an interpolating surface. It then calls
e01skc
to evaluate the interpolant at a sample of points on a rectangular grid.
Note that this example is not typical of a realistic problem: the number of data points would normally be larger, and the interpolant would need to be evaluated on a finer grid to obtain an accurate plot, say.