The routine may be called by the names e02gbf or nagf_fit_glinc_l1sol.
Given a matrix with rows and columns and a vector with elements, the routine calculates an solution to the overdetermined system of equations
That is to say, it calculates a vector , with elements, which minimizes the -norm (the sum of the absolute values) of the residuals
where the residuals are given by
Here is the element in row and column of , is the th element of and the th element of .
If, in addition, a matrix with rows and columns and a vector with elements, are given, the vector computed by the routine is such as to minimize the -norm subject to the set of inequality constraints .
The matrices and need not be of full rank.
Typically in applications to data fitting, data consisting of points with coordinates is to be approximated by a linear combination of known functions ,
in the -norm, possibly subject to linear inequality constraints on the coefficients of the form where is the vector of the and and are as in the previous paragraph. This is equivalent to finding an solution to the overdetermined system of equations
subject to .
Thus if, for each value of and , the element of the matrix above is set equal to the value of and is equal to and and are also supplied to the routine, the solution vector will contain the required values of the . Note that the independent variable above can, instead, be a vector of several independent variables (this includes the case where each of is a function of a different variable, or set of variables).
where is a penalty parameter, is the th row of the matrix , and is the th element of the vector . It proceeds in a step-by-step manner much like the simplex method for linear programming but does not move from vertex to vertex and does not require the problem to be cast in a form containing only non-negative unknowns. It uses stable procedures to update an orthogonal factorization of the current set of active equations and constraints.
Bartels R H, Conn A R and Charalambous C (1976) Minimisation techniques for piecewise Differentiable functions – the solution to an overdetermined linear system Technical Report No. 247, CORR 76/30 Mathematical Sciences Department, The John Hopkins University
Bartels R H, Conn A R and Sinclair J W (1976) A Fortran program for solving overdetermined systems of linear equations in the Sense Technical Report No. 236, CORR 76/7 Mathematical Sciences Department, The John Hopkins University
Bartels R H, Conn A R and Sinclair J W (1978) Minimisation techniques for piecewise differentiable functions – the solution to an overdetermined linear system SIAM J. Numer. Anal.15 224–241
Conn A R and Pietrzykowski T (1977) A penalty-function method converging directly to a constrained optimum SIAM J. Numer. Anal.14 348–375
1: – IntegerInput
On entry: the number of equations in the overdetermined system, (i.e., the number of rows of the matrix ).
2: – IntegerInput
On entry: the number of unknowns, (the number of columns of the matrix ).
3: – IntegerInput
On entry: , where is the number of constraints (which may be zero).
4: – Real (Kind=nag_wp) arrayInput/Output
On entry: the equation and constraint matrices stored in the following manner.
The first columns contain the rows of the matrix ; element
specifying the element in the th row and th column of (the coefficient of the th unknown in the th equation), for and . The next columns contain the rows of the constraint matrix ; element
containing the element in the th row and th column of (the coefficient of the th unknown in the th constraint), for and .
On exit: unchanged, except possibly to the extent of a small multiple of the machine precision. (See Section 9.)
5: – IntegerInput
On entry: the first dimension of the array e as declared in the (sub)program from which e02gbf is called.
6: – Real (Kind=nag_wp) arrayInput
On entry: , for , must contain
(the th element of the right-hand side vector of the overdetermined system of equations) and , for , must contain (the th element of the right-hand side vector of the constraints), where is the number of constraints.
7: – Real (Kind=nag_wp) arrayInput/Output
On entry: must contain an estimate of the th unknown, for . If no better initial estimate for is available, set .
On exit: the latest estimate of the
th unknown, for . If on exit, these are the solution values.
8: – IntegerInput
On entry: the maximum number of steps to be allowed for the solution of the unconstrained problem. Typically this may be a modest multiple of . If, on entry, mxs is zero or negative, the value returned by x02bbf is used.
9: – Subroutine, supplied by the user.External Procedure
monit can be used to print out the current values of any selection of its arguments. The frequency with which monit is called in e02gbf is controlled by iprint.
On entry: the number of unknowns (the number of columns of the matrix ).
2: – Real (Kind=nag_wp) arrayInput
On entry: the latest estimate of the unknowns.
3: – IntegerInput
On entry: the number of iterations so far carried out.
4: – IntegerInput
On entry: the total number of equations and constraints which are currently active (i.e., the number of equations with zero residuals plus the number of constraints which are satisfied as equations).
5: – Real (Kind=nag_wp)Input
On entry: the -norm of the current residuals of the overdetermined system of equations.
monit must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which e02gbf is called. Arguments denoted as Input must not be changed by this procedure.
10: – IntegerInput
On entry: the frequency of iteration print out.
monit is called every iprint iterations and at the solution.
Information is printed out at the solution only. Otherwise monit is not called (but a dummy routine must still be provided).
11: – IntegerOutput
On exit: the total number of equations and constraints which are then active (i.e., the number of equations with zero residuals plus the number of constraints which are satisfied as equalities).
12: – Real (Kind=nag_wp)Output
On exit: the -norm (sum of absolute values) of the equation residuals.
13: – Integer arrayOutput
On exit: specifies which columns of e relate to the inactive equations and constraints. up to number the active columns and up to number the inactive columns.
14: – Real (Kind=nag_wp) arrayWorkspace
15: – IntegerInput
On entry: the dimension of the array w as declared in the (sub)program from which e02gbf is called.
16: – IntegerInput/Output
On entry: ifail must be set to , or to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of means that an error message is printed while a value of means that it is not.
If halting is not appropriate, the value or is recommended. If message printing is undesirable, then the value is recommended. Otherwise, the value is recommended. When the value or is used it is essential to test the value of ifail on exit.
On exit: unless the routine detects an error or a warning has been flagged (see Section 6).
6Error Indicators and Warnings
If on entry or , explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
The constraints cannot all be satisfied simultaneously: they are not compatible with one another. Hence no solution is possible.
The limit imposed by mxs has been reached without finding a solution. Consider restarting from the current point by simply calling e02gbf again without changing the arguments.
The routine has failed because of numerical difficulties; the problem is too ill-conditioned. Consider rescaling the unknowns.
Elements to m of one of the first mpl columns of the array e are all zero – this corresponds to a zero row in either of the matrices or .
On entry, iw is too small. . Minimum possible dimension: .
On entry, and .
On entry, and .
On entry, and .
On entry, .
An unexpected error has been triggered by this routine. Please
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.
The method is stable.
8Parallelism and Performance
Background information to multithreading can be found in the Multithreading documentation.
e02gbf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
e02gbf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.
The effect of and on the time and on the number of iterations varies from problem to problem, but typically the number of iterations is a small multiple of and the total time taken is approximately proportional to .
Linear dependencies among the rows or columns of and are not necessarily a problem to the algorithm. Solutions can be obtained from rank-deficient and . However, the algorithm requires that at every step the currently active columns of e form a linearly independent set. If this is not the case at any step, small, random perturbations of the order of rounding error are added to the appropriate columns of e. Normally this perturbation process will not affect the solution significantly. It does mean, however, that results may not be exactly reproducible.
Suppose we wish to approximate in a set of data by a curve of the form
which has non-negative slope at the data points. Given points we may form the equations
for , for the data points. The requirement of a non-negative slope at the data points demands
for each and these form the constraints.
(Note that, for fitting with polynomials, it would usually be advisable to work with the polynomial expressed in Chebyshev series form (see the E02 Chapter Introduction). The power series form is used here for simplicity of exposition.)