NAG FL Interface
f04mff (real_​toeplitz_​update)

Settings help

FL Name Style:


FL Specification Language:


1 Purpose

f04mff updates the solution of the equations Tx=b, where T is a real symmetric positive definite Toeplitz matrix.

2 Specification

Fortran Interface
Subroutine f04mff ( n, t, b, x, p, work, ifail)
Integer, Intent (In) :: n
Integer, Intent (Inout) :: ifail
Real (Kind=nag_wp), Intent (In) :: t(0:*), b(*)
Real (Kind=nag_wp), Intent (Inout) :: x(*), work(*)
Real (Kind=nag_wp), Intent (Out) :: p
C Header Interface
#include <nag.h>
void  f04mff_ (const Integer *n, const double t[], const double b[], double x[], double *p, double work[], Integer *ifail)
The routine may be called by the names f04mff or nagf_linsys_real_toeplitz_update.

3 Description

f04mff solves the equations
Tnxn=bn,  
where Tn is the n×n symmetric positive definite Toeplitz matrix
Tn=( τ0 τ1 τ2 τn-1 τ1 τ0 τ1 τn-2 τ2 τ1 τ0 τn-3 . . . . τn-1 τn-2 τn-3 τ0 )  
and bn is the n-element vector bn=(β1β2βn)T, given the solution of the equations
Tn-1xn-1=bn-1.  
This routine will normally be used to successively solve the equations
Tkxk=bk,   k= 1,2,,n.  
If it is desired to solve the equations for a single value of n, then routine f04fff may be called. This routine uses the method of Levinson (see Levinson (1947) and Golub and Van Loan (1996)).

4 References

Bunch J R (1985) Stability of methods for solving Toeplitz systems of equations SIAM J. Sci. Statist. Comput. 6 349–364
Bunch J R (1987) The weak and strong stability of algorithms in numerical linear algebra Linear Algebra Appl. 88/89 49–66
Cybenko G (1980) The numerical stability of the Levinson–Durbin algorithm for Toeplitz systems of equations SIAM J. Sci. Statist. Comput. 1 303–319
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore
Levinson N (1947) The Weiner RMS error criterion in filter design and prediction J. Math. Phys. 25 261–278

5 Arguments

1: n Integer Input
On entry: the order of the Toeplitz matrix T.
Constraint: n0. When n=0, an immediate return is effected.
2: t(0:*) Real (Kind=nag_wp) array Input
Note: the dimension of the array t must be at least max(1,n).
On entry: t(i) must contain the value τi, for i=0,1,,n-1.
Constraint: t(0)>0.0. Note that if this is not true, the Toeplitz matrix cannot be positive definite.
3: b(*) Real (Kind=nag_wp) array Input
Note: the dimension of the array b must be at least max(1,n).
On entry: the right-hand side vector bn.
4: x(*) Real (Kind=nag_wp) array Input/Output
Note: the dimension of the array x must be at least max(1,n).
On entry: with n>1 the (n-1) elements of the solution vector xn-1 as returned by a previous call to f04mff. The element x(n) need not be specified.
On exit: the solution vector xn.
5: p Real (Kind=nag_wp) Output
On exit: the reflection coefficient pn-1. (See Section 9.)
6: work(*) Real (Kind=nag_wp) array Input/Output
Note: the dimension of the array work must be at least max(1,2×n-1).
On entry: with n>2 the elements of work should be as returned from a previous call to f04mff with (n-1) as the argument n.
On exit: the first (n-1) elements of work contain the solution to the Yule–Walker equations
Tn-1yn-1=-tn-1,  
where tn-1=(τ1τ2τn-1)t.
7: ifail Integer Input/Output
On entry: ifail must be set to 0, −1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of −1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value −1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or −1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
The Toeplitz Matrix is not positive definite Value of the reflection coefficient is value.
If, on exit, p is close to unity, Tn was probably close to being singular.
ifail=-1
On entry, n=value.
Constraint: n0.
On entry, t(0)=value.
Constraint: t(0)>0.0.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The computed solution of the equations certainly satisfies
r=Tnxn-bn,  
where r1 is approximately bounded by
r1cεC(Tn),  
c being a modest function of n, ε being the machine precision and C(T) being the condition number of T with respect to inversion. This bound is almost certainly pessimistic, but it seems unlikely that the method of Levinson is backward stable, so caution should be exercised when Tn is ill-conditioned. The following bound on Tn-1 holds:
max(1i=1 n-1(1-pi2) ,1i=1 n-1(1-pi) ) Tn-11i=1 n-1 (1+|pi| 1-|pi| ) .  
(See Golub and Van Loan (1996).) The norm of Tn-1 may also be estimated using routine f04ydf. For further information on stability issues see Bunch (1985), Bunch (1987), Cybenko (1980) and Golub and Van Loan (1996).

8 Parallelism and Performance

f04mff makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The number of floating-point operations used by this routine is approximately 8n.
If yi is the solution of the equations
Tiyi=-(τ1τ2τi)T,  
then the reflection coefficient pi is defined as the ith element of yi.

10 Example

This example finds the solution of the equations Tkxk=bk, k=1,2,3,4, where
T4=( 4 3 2 1 3 4 3 2 2 3 4 3 1 2 3 4 )   and  b4=( 1 1 1 1 ) .  

10.1 Program Text

Program Text (f04mffe.f90)

10.2 Program Data

Program Data (f04mffe.d)

10.3 Program Results

Program Results (f04mffe.r)