NAG FL Interface
s30faf (opt_​barrier_​std_​price)

1 Purpose

s30faf computes the price of a standard barrier option.

2 Specification

Fortran Interface
Subroutine s30faf ( calput, type, m, n, x, s, h, k, t, sigma, r, q, p, ldp, ifail)
Integer, Intent (In) :: m, n, ldp
Integer, Intent (Inout) :: ifail
Real (Kind=nag_wp), Intent (In) :: x(m), s, h, k, t(n), sigma, r, q
Real (Kind=nag_wp), Intent (Inout) :: p(ldp,n)
Character (1), Intent (In) :: calput
Character (2), Intent (In) :: type
C Header Interface
#include <nag.h>
void  s30faf_ (const char *calput, const char *typ, const Integer *m, const Integer *n, const double x[], const double *s, const double *h, const double *k, const double t[], const double *sigma, const double *r, const double *q, double p[], const Integer *ldp, Integer *ifail, const Charlen length_calput, const Charlen length_typ)
The routine may be called by the names s30faf or nagf_specfun_opt_barrier_std_price.

3 Description

s30faf computes the price of a standard barrier option, where the exercise, for a given strike price, X, depends on the underlying asset price, S, reaching or crossing a specified barrier level, H. Barrier options of type In only become active (are knocked in) if the underlying asset price attains the pre-determined barrier level during the lifetime of the contract. Those of type Out start active and are knocked out if the underlying asset price attains the barrier level during the lifetime of the contract. A cash rebate, K, may be paid if the option is inactive at expiration. The option may also be described as Up (the underlying price starts below the barrier level) or Down (the underlying price starts above the barrier level). This gives the following options which can be specified as put or call contracts.
Down-and-In: the option starts inactive with the underlying asset price above the barrier level. It is knocked in if the underlying price moves down to hit the barrier level before expiration.
Down-and-Out: the option starts active with the underlying asset price above the barrier level. It is knocked out if the underlying price moves down to hit the barrier level before expiration.
Up-and-In: the option starts inactive with the underlying asset price below the barrier level. It is knocked in if the underlying price moves up to hit the barrier level before expiration.
Up-and-Out: the option starts active with the underlying asset price below the barrier level. It is knocked out if the underlying price moves up to hit the barrier level before expiration.
The payoff is maxS-X,0 for a call or maxX-S,0 for a put, if the option is active at expiration, otherwise it may pay a pre-specified cash rebate, K. Following Haug (2007), the prices of the various standard barrier options can be written as shown below. The volatility, σ, risk-free interest rate, r, and annualised dividend yield, q, are constants. The integer parameters, j and k, take the values ±1, depending on the type of barrier.
A = j S e-qT Φ jx1 - j X e-rT Φ j x1 - σT B = j S e-qT Φ j x2 - j X e-rT Φ j x2 - σT C = j S e-qT HS 2 μ+1 Φ ky1 - j X e-rT HS 2μ Φ k y1 - σT D = j S e-qT HS 2μ+1 Φ ky2 - j X e-rT HS 2μ Φ k y2 - σT E = K e-rT Φ k x2 - σT - HS 2μ Φ k y2 - σT F = K HS μ+λ Φ kz + HS μ-λ Φ k z-σT  
with
x1 = ln S/X σT + 1+μ σT x2 = ln S/H σT + 1+μ σT y1 = ln H2 / SX σT + 1+μσT y2 = lnH/S σT + 1+μσT z = lnH/S σT + λσT μ = r-q-σ 2 / 2 σ2 λ = μ2 + 2r σ2  
and where Φ denotes the cumulative Normal distribution function,
Φx = 12π - x exp -y2/2 dy .  
Down-and-In (S>H):
Down-and-Out (S>H):
Up-and-In (S<H):
Up-and-Out (S<H):
The option price Pij=PX=Xi,T=Tj is computed for each strike price in a set Xi, i=1,2,,m, and for each expiry time in a set Tj, j=1,2,,n.

4 References

Haug E G (2007) The Complete Guide to Option Pricing Formulas (2nd Edition) McGraw-Hill

5 Arguments

1: calput Character(1) Input
On entry: determines whether the option is a call or a put.
calput='C'
A call; the holder has a right to buy.
calput='P'
A put; the holder has a right to sell.
Constraint: calput='C' or 'P'.
2: type Character(2) Input
On entry: indicates the barrier type as In or Out and its relation to the price of the underlying asset as Up or Down.
type='DI'
Down-and-In.
type='DO'
Down-and-Out.
type='UI'
Up-and-In.
type='UO'
Up-and-Out.
Constraint: type='DI', 'DO', 'UI' or 'UO'.
3: m Integer Input
On entry: the number of strike prices to be used.
Constraint: m1.
4: n Integer Input
On entry: the number of times to expiry to be used.
Constraint: n1.
5: xm Real (Kind=nag_wp) array Input
On entry: xi must contain Xi, the ith strike price, for i=1,2,,m.
Constraint: xiz ​ and ​ xi 1 / z , where z = x02amf , the safe range parameter, for i=1,2,,m.
6: s Real (Kind=nag_wp) Input
On entry: S, the price of the underlying asset.
Constraint: sz ​ and ​s1.0/z, where z=x02amf, the safe range parameter.
7: h Real (Kind=nag_wp) Input
On entry: the barrier price.
Constraint: hz ​ and ​h1/z, where z=x02amf, the safe range parameter.
8: k Real (Kind=nag_wp) Input
On entry: the value of a possible cash rebate to be paid if the option has not been knocked in (or out) before expiration.
Constraint: k0.0.
9: tn Real (Kind=nag_wp) array Input
On entry: ti must contain Ti, the ith time, in years, to expiry, for i=1,2,,n.
Constraint: tiz, where z = x02amf , the safe range parameter, for i=1,2,,n.
10: sigma Real (Kind=nag_wp) Input
On entry: σ, the volatility of the underlying asset. Note that a rate of 15% should be entered as 0.15.
Constraint: sigma>0.0.
11: r Real (Kind=nag_wp) Input
On entry: r, the annual risk-free interest rate, continuously compounded. Note that a rate of 5% should be entered as 0.05.
Constraint: r0.0.
12: q Real (Kind=nag_wp) Input
On entry: q, the annual continuous yield rate. Note that a rate of 8% should be entered as 0.08.
Constraint: q0.0.
13: pldpn Real (Kind=nag_wp) array Output
On exit: pij contains Pij, the option price evaluated for the strike price xi at expiry tj for i=1,2,,m and j=1,2,,n.
14: ldp Integer Input
On entry: the first dimension of the array p as declared in the (sub)program from which s30faf is called.
Constraint: ldpm.
15: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, calput=value was an illegal value.
ifail=2
On entry, type=value was an illegal value.
ifail=3
On entry, m=value.
Constraint: m1.
ifail=4
On entry, n=value.
Constraint: n1.
ifail=5
On entry, xvalue=value.
Constraint: xivalue and xivalue.
ifail=6
On entry, s=value.
Constraint: svalue and svalue.
ifail=7
On entry, h=value.
Constraint: hvalue and hvalue.
ifail=8
On entry, k=value.
Constraint: k0.0.
ifail=9
On entry, tvalue=value.
Constraint: tivalue.
ifail=10
On entry, sigma=value.
Constraint: sigma>0.0.
ifail=11
On entry, r=value.
Constraint: r0.0.
ifail=12
On entry, q=value.
Constraint: q0.0.
ifail=14
On entry, ldp=value and m=value.
Constraint: ldpm.
ifail=15
On entry, s and h are inconsistent with type: s=value and h=value.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The accuracy of the output is dependent on the accuracy of the cumulative Normal distribution function, Φ. This is evaluated using a rational Chebyshev expansion, chosen so that the maximum relative error in the expansion is of the order of the machine precision (see s15abf and s15adf). An accuracy close to machine precision can generally be expected.

8 Parallelism and Performance

s30faf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

None.

10 Example

This example computes the price of a Down-and-In put with a time to expiry of 6 months, a stock price of 100 and a strike price of 100. The barrier value is 95 and there is a cash rebate of 3, payable on expiry if the option has not been knocked in. The risk-free interest rate is 8% per year, there is an annual dividend return of 4% and the volatility is 30% per year.

10.1 Program Text

Program Text (s30fafe.f90)

10.2 Program Data

Program Data (s30fafe.d)

10.3 Program Results

Program Results (s30fafe.r)