The Cox proportional hazards model (see
Cox (1972)) relates the time to an event, usually death or failure, to a number of explanatory variables known as covariates. Some of the observations may be rightcensored, that is, the exact time to failure is not known, only that it is greater than a known time.
Let
${t}_{\mathit{i}}$, for
$\mathit{i}=1,2,\dots ,n$, be the failure time or censored time for the
$i$th observation with the vector of
$p$ covariates
${z}_{i}$.
It is assumed that censoring and failure mechanisms are independent. The hazard function,
$\lambda \left(t,z\right)$, is the probability that an individual with covariates
$z$ fails at time
$t$ given that the individual survived up to time
$t$. In the Cox proportional hazards model,
$\lambda \left(t,z\right)$ is of the form
where
${\lambda}_{0}$ is the baseline hazard function, an unspecified function of time, and
$\beta $ is a vector of unknown parameters. As
${\lambda}_{0}$ is unknown, the parameters
$\beta $ are estimated using the conditional or marginal likelihood. This involves considering the covariate values of all subjects that are at risk at the time when a failure occurs. The probability that the subject that failed had their observed set of covariate values is computed.
The risk set at a failure time consists of those subjects that fail or are censored at that time and those who survive beyond that time. As risk sets are computed for every distinct failure time, it should be noted that the combined risk sets may be considerably larger than the original data. If the data can be considered as coming from different strata such that ${\lambda}_{0}$ varies from strata to strata but $\beta $ remains constant, then g12zaf will return a factor that indicates to which risk set/strata each member of the risk sets belongs rather than just to which risk set.
Given the risk sets the Cox proportional hazards model can then be fitted using a Poisson generalized linear model (
g02gcf with
g04eaf to compute dummy variables) using Breslow's approximation for ties (see
Breslow (1974)). This will give the same fit as
g12baf. If the exact treatment of ties in discrete time is required, as given by
Cox (1972), then the model is fitted as a conditional logistic model using
g11caf.

1:
$\mathbf{n}$ – Integer
Input

On entry: $n$, the number of data points.
Constraint:
${\mathbf{n}}\ge 2$.

2:
$\mathbf{m}$ – Integer
Input

On entry: the number of covariates in array
z.
Constraint:
${\mathbf{m}}\ge 1$.

3:
$\mathbf{ns}$ – Integer
Input

On entry: the number of strata. If
${\mathbf{ns}}>0$ then the stratum for each observation must be supplied in
isi.
Constraint:
${\mathbf{ns}}\ge 0$.

4:
$\mathbf{z}\left({\mathbf{ldz}},{\mathbf{m}}\right)$ – Real (Kind=nag_wp) array
Input

On entry: the
$i$th row must contain the covariates which are associated with the
$i$th failure time given in
t.

5:
$\mathbf{ldz}$ – Integer
Input

On entry: the first dimension of the array
z as declared in the (sub)program from which
g12zaf is called.
Constraint:
${\mathbf{ldz}}\ge {\mathbf{n}}$.

6:
$\mathbf{isz}\left({\mathbf{m}}\right)$ – Integer array
Input

On entry: indicates which subset of covariates are to be included in the model.
 ${\mathbf{isz}}\left(j\right)\ge 1$
 The $j$th covariate is included in the model.
 ${\mathbf{isz}}\left(j\right)=0$
 The $j$th covariate is excluded from the model and not referenced.
Constraint:
${\mathbf{isz}}\left(j\right)\ge 0$ and at least one value must be nonzero.

7:
$\mathbf{ip}$ – Integer
Input

On entry:
$p$, the number of covariates included in the model as indicated by
isz.
Constraint:
${\mathbf{ip}}=\text{}$ the number of nonzero values of
isz.

8:
$\mathbf{t}\left({\mathbf{n}}\right)$ – Real (Kind=nag_wp) array
Input

On entry: the vector of $n$ failure censoring times.

9:
$\mathbf{ic}\left({\mathbf{n}}\right)$ – Integer array
Input

On entry: the status of the individual at time
$t$ given in
t.
 ${\mathbf{ic}}\left(i\right)=0$
 Indicates that the $i$th individual has failed at time ${\mathbf{t}}\left(i\right)$.
 ${\mathbf{ic}}\left(i\right)=1$
 Indicates that the $i$th individual has been censored at time ${\mathbf{t}}\left(i\right)$.
Constraint:
${\mathbf{ic}}\left(\mathit{i}\right)=0$ or $1$, for $\mathit{i}=1,2,\dots ,{\mathbf{n}}$.

10:
$\mathbf{isi}\left(*\right)$ – Integer array
Input

Note: the dimension of the array
isi
must be at least
${\mathbf{n}}$ if
${\mathbf{ns}}>0$, and at least
$1$ otherwise.
On entry: if
${\mathbf{ns}}>0$, the stratum indicators which also allow data points to be excluded from the analysis.
If
${\mathbf{ns}}=0$,
isi is not referenced.
 ${\mathbf{isi}}\left(i\right)=k$
 Indicates that the $i$th data point is in the $k$th stratum, where $k=1,2,\dots ,{\mathbf{ns}}$.
 ${\mathbf{isi}}\left(i\right)=0$
 Indicates that the $i$th data point is omitted from the analysis.
Constraint:
if ${\mathbf{ns}}>0$,
$0\le {\mathbf{isi}}\left(\mathit{i}\right)\le {\mathbf{ns}}$, for $\mathit{i}=1,2,\dots ,{\mathbf{n}}$.

11:
$\mathbf{num}$ – Integer
Output

On exit: the number of values in the combined risk sets.

12:
$\mathbf{ixs}\left({\mathbf{mxn}}\right)$ – Integer array
Output

On exit: the factor giving the risk sets/strata for the data in
x and
id.
If ${\mathbf{ns}}=0$ or $1$, ${\mathbf{ixs}}\left(i\right)=l$ for members of the $l$th risk set.
If ${\mathbf{ns}}>1$, ${\mathbf{ixs}}\left(i\right)=\left(j1\right)\times {\mathbf{nd}}+l$ for the observations in the $l$th risk set for the $j$th strata.

13:
$\mathbf{nxs}$ – Integer
Output

On exit: the number of levels for the risk sets/strata factor given in
ixs.

14:
$\mathbf{x}\left({\mathbf{mxn}},{\mathbf{ip}}\right)$ – Real (Kind=nag_wp) array
Output

On exit: the first
num rows contain the values of the covariates for the members of the risk sets.

15:
$\mathbf{mxn}$ – Integer
Input

On entry: the first dimension of the array
x and the dimension of the arrays
ixs and
id as declared in the (sub)program from which
g12zaf is called.
Constraint:
mxn must be sufficiently large for the arrays to contain the expanded risk sets. The size will depend on the pattern of failures times and censored times. The minimum value will be returned in
num unless the routine exits with
${\mathbf{ifail}}={\mathbf{1}}$ or
${\mathbf{2}}$.

16:
$\mathbf{id}\left({\mathbf{mxn}}\right)$ – Integer array
Output

On exit: indicates if the member of the risk set given in
x failed.
${\mathbf{id}}\left(i\right)=1$ if the member of the risk set failed at the time defining the risk set and ${\mathbf{id}}\left(i\right)=0$ otherwise.

17:
$\mathbf{nd}$ – Integer
Output

On exit: the number of distinct failure times, i.e., the number of risk sets.

18:
$\mathbf{tp}\left({\mathbf{n}}\right)$ – Real (Kind=nag_wp) array
Output

On exit: ${\mathbf{tp}}\left(\mathit{i}\right)$ contains the $\mathit{i}$th distinct failure time, for $\mathit{i}=1,2,\dots ,{\mathbf{nd}}$.

19:
$\mathbf{irs}\left({\mathbf{n}}\right)$ – Integer array
Output

On exit: indicates rows in
x and elements in
ixs and
id corresponding to the risk sets. The first risk set corresponding to failure time
${\mathbf{tp}}\left(1\right)$ is given by rows
$1$ to
${\mathbf{irs}}\left(1\right)$. The
$\mathit{l}$th risk set is given by rows
${\mathbf{irs}}\left(\mathit{l}1\right)+1$ to
${\mathbf{irs}}\left(\mathit{l}\right)$, for
$\mathit{l}=1,2,\dots ,{\mathbf{nd}}$.

20:
$\mathbf{ifail}$ – Integer
Input/Output

On entry:
ifail must be set to
$0$,
$1$ or
$1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $1$ means that an error message is printed while a value of $1$ means that it is not.
If halting is not appropriate, the value
$1$ or
$1$ is recommended. If message printing is undesirable, then the value
$1$ is recommended. Otherwise, the value
$0$ is recommended.
When the value $\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit:
${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see
Section 6).
If on entry
${\mathbf{ifail}}=0$ or
$1$, explanatory error messages are output on the current error message unit (as defined by
x04aaf).
Not applicable.
When there are strata present, i.e.,
${\mathbf{ns}}>1$, not all the
nxs groups may be present.
The data are the remission times for two groups of leukemia patients (see page 242 of
Gross and Clark (1975)). A dummy variable indicates which group they come from. The risk sets are computed using
g12zaf and the Cox's proportional hazard model is fitted using
g11caf.