NAG FL Interface
g05ryf (multivar_students_t)
1
Purpose
g05ryf sets up a reference vector and generates an array of pseudorandom numbers from a multivariate Student's $t$ distribution with $\nu $ degrees of freedom, mean vector $a$ and covariance matrix $\frac{\nu}{\nu 2}C$.
2
Specification
Fortran Interface
Subroutine g05ryf ( 
mode, n, df, m, xmu, c, ldc, r, lr, state, x, ldx, ifail) 
Integer, Intent (In) 
:: 
mode, n, df, m, ldc, lr, ldx 
Integer, Intent (Inout) 
:: 
state(*), ifail 
Real (Kind=nag_wp), Intent (In) 
:: 
xmu(m), c(ldc,m) 
Real (Kind=nag_wp), Intent (Inout) 
:: 
r(lr), x(ldx,*) 

C Header Interface
#include <nag.h>
void 
g05ryf_ (const Integer *mode, const Integer *n, const Integer *df, const Integer *m, const double xmu[], const double c[], const Integer *ldc, double r[], const Integer *lr, Integer state[], double x[], const Integer *ldx, Integer *ifail) 

C++ Header Interface
#include <nag.h> extern "C" {
void 
g05ryf_ (const Integer &mode, const Integer &n, const Integer &df, const Integer &m, const double xmu[], const double c[], const Integer &ldc, double r[], const Integer &lr, Integer state[], double x[], const Integer &ldx, Integer &ifail) 
}

The routine may be called by the names g05ryf or nagf_rand_multivar_students_t.
3
Description
When the covariance matrix is nonsingular (i.e., strictly positive definite), the distribution has probability density function
where
$m$ is the number of dimensions,
$\nu $ is the degrees of freedom,
$a$ is the vector of means,
$x$ is the vector of positions and
$\frac{\nu}{\nu 2}C$ is the covariance matrix.
The routine returns the value
where
$z$ is generated by
g05skf from a Normal distribution with mean zero and covariance matrix
$C$ and
$s$ is generated by
g05sdf from a
${\chi}^{2}$distribution with
$\nu $ degrees of freedom.
One of the initialization routines
g05kff (for a repeatable sequence if computed sequentially) or
g05kgf (for a nonrepeatable sequence) must be called prior to the first call to
g05ryf.
4
References
Knuth D E (1981) The Art of Computer Programming (Volume 2) (2nd Edition) Addison–Wesley
Wilkinson J H (1965) The Algebraic Eigenvalue Problem Oxford University Press, Oxford
5
Arguments

1:
$\mathbf{mode}$ – Integer
Input

On entry: a code for selecting the operation to be performed by the routine.
 ${\mathbf{mode}}=0$
 Set up reference vector only.
 ${\mathbf{mode}}=1$
 Generate variates using reference vector set up in a prior call to g05ryf.
 ${\mathbf{mode}}=2$
 Set up reference vector and generate variates.
Constraint:
${\mathbf{mode}}=0$, $1$ or $2$.

2:
$\mathbf{n}$ – Integer
Input

On entry: $n$, the number of random variates required.
Constraint:
${\mathbf{n}}\ge 0$.

3:
$\mathbf{df}$ – Integer
Input

On entry: $\nu $, the number of degrees of freedom of the distribution.
Constraint:
${\mathbf{df}}\ge 3$.

4:
$\mathbf{m}$ – Integer
Input

On entry: $m$, the number of dimensions of the distribution.
Constraint:
${\mathbf{m}}>0$.

5:
$\mathbf{xmu}\left({\mathbf{m}}\right)$ – Real (Kind=nag_wp) array
Input

On entry: $a$, the vector of means of the distribution.

6:
$\mathbf{c}\left({\mathbf{ldc}},{\mathbf{m}}\right)$ – Real (Kind=nag_wp) array
Input

On entry: matrix which, along with
df, defines the covariance of the distribution. Only the upper triangle need be set.
Constraint:
c must be positive semidefinite to
machine precision.

7:
$\mathbf{ldc}$ – Integer
Input

On entry: the first dimension of the array
c as declared in the (sub)program from which
g05ryf is called.
Constraint:
${\mathbf{ldc}}\ge {\mathbf{m}}$.

8:
$\mathbf{r}\left({\mathbf{lr}}\right)$ – Real (Kind=nag_wp) array
Input/Output

On entry: if ${\mathbf{mode}}=1$, the reference vector as set up by g05ryf in a previous call with ${\mathbf{mode}}=0$ or $2$.
On exit: if ${\mathbf{mode}}=0$ or $2$, the reference vector that can be used in subsequent calls to g05ryf with ${\mathbf{mode}}=1$.

9:
$\mathbf{lr}$ – Integer
Input

On entry: the dimension of the array
r as declared in the (sub)program from which
g05ryf is called. If
${\mathbf{mode}}=1$, it must be the same as the value of
lr specified in the prior call to
g05ryf with
${\mathbf{mode}}=0$ or
$2$.
Constraint:
${\mathbf{lr}}\ge {\mathbf{m}}\times \left({\mathbf{m}}+1\right)+2$.

10:
$\mathbf{state}\left(*\right)$ – Integer array
Communication Array
Note: the actual argument supplied
must be the array
state supplied to the initialization routines
g05kff or
g05kgf.
On entry: contains information on the selected base generator and its current state.
On exit: contains updated information on the state of the generator.

11:
$\mathbf{x}\left({\mathbf{ldx}},*\right)$ – Real (Kind=nag_wp) array
Output
Note: the second dimension of the array
x
must be at least
${\mathbf{m}}$.
On exit: the array of pseudorandom multivariate Student's $t$ vectors generated by the routine, with ${\mathbf{x}}\left(i,j\right)$ holding the $j$th dimension for the $i$th variate.

12:
$\mathbf{ldx}$ – Integer
Input

On entry: the first dimension of the array
x as declared in the (sub)program from which
g05ryf is called.
Constraint:
${\mathbf{ldx}}\ge {\mathbf{n}}$.

13:
$\mathbf{ifail}$ – Integer
Input/Output

On entry:
ifail must be set to
$0$,
$1$ or
$1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $1$ means that an error message is printed while a value of $1$ means that it is not.
If halting is not appropriate, the value
$1$ or
$1$ is recommended. If message printing is undesirable, then the value
$1$ is recommended. Otherwise, the value
$0$ is recommended.
When the value $\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit:
${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see
Section 6).
6
Error Indicators and Warnings
If on entry
${\mathbf{ifail}}=0$ or
$1$, explanatory error messages are output on the current error message unit (as defined by
x04aaf).
Errors or warnings detected by the routine:
 ${\mathbf{ifail}}=1$

On entry, ${\mathbf{mode}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{mode}}=0$, $1$ or $2$.
 ${\mathbf{ifail}}=2$

On entry, ${\mathbf{n}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{n}}\ge 0$.
 ${\mathbf{ifail}}=3$

On entry, ${\mathbf{df}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{df}}\ge 3$.
 ${\mathbf{ifail}}=4$

On entry, ${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{m}}>0$.
 ${\mathbf{ifail}}=6$

On entry, the covariance matrix $C$ is not positive semidefinite to machine precision.
 ${\mathbf{ifail}}=7$

On entry, ${\mathbf{ldc}}=\u2329\mathit{\text{value}}\u232a$ and ${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{ldc}}\ge {\mathbf{m}}$.
 ${\mathbf{ifail}}=8$

m is not the same as when
r was set up in a previous call.
Previous value of
${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$ and
${\mathbf{m}}=\u2329\mathit{\text{value}}\u232a$.
 ${\mathbf{ifail}}=9$

On entry,
lr is not large enough,
${\mathbf{lr}}=\u2329\mathit{\text{value}}\u232a$: minimum length required
$\text{}=\u2329\mathit{\text{value}}\u232a$.
 ${\mathbf{ifail}}=10$

On entry,
state vector has been corrupted or not initialized.
 ${\mathbf{ifail}}=12$

On entry, ${\mathbf{ldx}}=\u2329\mathit{\text{value}}\u232a$ and ${\mathbf{n}}=\u2329\mathit{\text{value}}\u232a$.
Constraint: ${\mathbf{ldx}}\ge {\mathbf{n}}$.
 ${\mathbf{ifail}}=99$
An unexpected error has been triggered by this routine. Please
contact
NAG.
See
Section 7 in the Introduction to the NAG Library FL Interface for further information.
 ${\mathbf{ifail}}=399$
Your licence key may have expired or may not have been installed correctly.
See
Section 8 in the Introduction to the NAG Library FL Interface for further information.
 ${\mathbf{ifail}}=999$
Dynamic memory allocation failed.
See
Section 9 in the Introduction to the NAG Library FL Interface for further information.
7
Accuracy
Not applicable.
8
Parallelism and Performance
g05ryf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
g05ryf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the
X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the
Users' Note for your implementation for any additional implementationspecific information.
The time taken by g05ryf is of order $n{m}^{3}$.
It is recommended that the diagonal elements of $C$ should not differ too widely in order of magnitude. This may be achieved by scaling the variables if necessary. The actual matrix decomposed is $C+E=L{L}^{\mathrm{T}}$, where $E$ is a diagonal matrix with small positive diagonal elements. This ensures that, even when $C$ is singular, or nearly singular, the Cholesky factor $L$ corresponds to a positive definite covariance matrix that agrees with $C$ within machine precision.
10
Example
This example prints ten pseudorandom observations from a multivariate Student's
$t$distribution with ten degrees of freedom, means vector
and
c matrix
generated by
g05ryf. All ten observations are generated by a single call to
g05ryf with
${\mathbf{mode}}=2$. The random number generator is initialized by
g05kff.
10.1
Program Text
10.2
Program Data
10.3
Program Results