NAG FL Interface
f08cxf (zunmrq)

1 Purpose

f08cxf multiplies a general complex m by n matrix C by the complex unitary matrix Q from an RQ factorization computed by f08cvf.

2 Specification

Fortran Interface
Subroutine f08cxf ( side, trans, m, n, k, a, lda, tau, c, ldc, work, lwork, info)
Integer, Intent (In) :: m, n, k, lda, ldc, lwork
Integer, Intent (Out) :: info
Complex (Kind=nag_wp), Intent (In) :: tau(*)
Complex (Kind=nag_wp), Intent (Inout) :: a(lda,*), c(ldc,*)
Complex (Kind=nag_wp), Intent (Out) :: work(max(1,lwork))
Character (1), Intent (In) :: side, trans
C Header Interface
#include <nag.h>
void  f08cxf_ (const char *side, const char *trans, const Integer *m, const Integer *n, const Integer *k, Complex a[], const Integer *lda, const Complex tau[], Complex c[], const Integer *ldc, Complex work[], const Integer *lwork, Integer *info, const Charlen length_side, const Charlen length_trans)
The routine may be called by the names f08cxf, nagf_lapackeig_zunmrq or its LAPACK name zunmrq.

3 Description

f08cxf is intended to be used following a call to f08cvf, which performs an RQ factorization of a complex matrix A and represents the unitary matrix Q as a product of elementary reflectors.
This routine may be used to form one of the matrix products
QC ,   QHC ,   CQ ,   CQH ,  
overwriting the result on C, which may be any complex rectangular m by n matrix.
A common application of this routine is in solving underdetermined linear least squares problems, as described in the F08 Chapter Introduction, and illustrated in Section 10 in f08cvf.

4 References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia https://www.netlib.org/lapack/lug
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5 Arguments

1: side Character(1) Input
On entry: indicates how Q or QH is to be applied to C.
side='L'
Q or QH is applied to C from the left.
side='R'
Q or QH is applied to C from the right.
Constraint: side='L' or 'R'.
2: trans Character(1) Input
On entry: indicates whether Q or QH is to be applied to C.
trans='N'
Q is applied to C.
trans='C'
QH is applied to C.
Constraint: trans='N' or 'C'.
3: m Integer Input
On entry: m, the number of rows of the matrix C.
Constraint: m0.
4: n Integer Input
On entry: n, the number of columns of the matrix C.
Constraint: n0.
5: k Integer Input
On entry: k, the number of elementary reflectors whose product defines the matrix Q.
Constraints:
  • if side='L', m k 0 ;
  • if side='R', n k 0 .
6: alda* Complex (Kind=nag_wp) array Input/Output
Note: the second dimension of the array a must be at least max1,m if side='L' and at least max1,n if side='R'.
On entry: the ith row of a must contain the vector which defines the elementary reflector Hi, for i=1,2,,k, as returned by f08cvf.
On exit: is modified by f08cxf but restored on exit.
7: lda Integer Input
On entry: the first dimension of the array a as declared in the (sub)program from which f08cxf is called.
Constraint: ldamax1,k.
8: tau* Complex (Kind=nag_wp) array Input
Note: the dimension of the array tau must be at least max1,k.
On entry: taui must contain the scalar factor of the elementary reflector Hi, as returned by f08cvf.
9: cldc* Complex (Kind=nag_wp) array Input/Output
Note: the second dimension of the array c must be at least max1,n.
On entry: the m by n matrix C.
On exit: c is overwritten by QC or QHC or CQ or CQH as specified by side and trans.
10: ldc Integer Input
On entry: the first dimension of the array c as declared in the (sub)program from which f08cxf is called.
Constraint: ldcmax1,m.
11: workmax1,lwork Complex (Kind=nag_wp) array Workspace
On exit: if info=0, the real part of work1 contains the minimum value of lwork required for optimal performance.
12: lwork Integer Input
On entry: the dimension of the array work as declared in the (sub)program from which f08cxf is called.
If lwork=-1, a workspace query is assumed; the routine only calculates the optimal size of the work array, returns this value as the first entry of the work array, and no error message related to lwork is issued.
Suggested value: for optimal performance, lworkn×nb if side='L' and at least m×nb if side='R', where nb is the optimal block size.
Constraints:
  • if side='L', lworkmax1,n or lwork=-1;
  • if side='R', lworkmax1,m or lwork=-1.
13: info Integer Output
On exit: info=0 unless the routine detects an error (see Section 6).

6 Error Indicators and Warnings

-999<info<0
If info=-i, argument i had an illegal value. An explanatory message is output, and execution of the program is terminated.
info=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.
An explanatory message is output, and execution of the program is terminated.

7 Accuracy

The computed result differs from the exact result by a matrix E such that
E2 = Oε C2  
where ε is the machine precision.

8 Parallelism and Performance

f08cxf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The total number of floating-point operations is approximately 8nk2m-k if side='L' and 8mk2n-k if side='R'.
The real analogue of this routine is f08ckf.

10 Example

See Section 10 in f08cvf.