NAG FL Interface
f01lef (real_​gen_​tridiag_​lu)

1 Purpose

f01lef computes an LU factorization of a real tridiagonal matrix, using Gaussian elimination with partial pivoting.

2 Specification

Fortran Interface
Subroutine f01lef ( n, a, lambda, b, c, tol, d, ipiv, ifail)
Integer, Intent (In) :: n
Integer, Intent (Inout) :: ifail
Integer, Intent (Out) :: ipiv(n)
Real (Kind=nag_wp), Intent (In) :: lambda, tol
Real (Kind=nag_wp), Intent (Inout) :: a(n), b(n), c(n)
Real (Kind=nag_wp), Intent (Out) :: d(n)
C Header Interface
#include <nag.h>
void  f01lef_ (const Integer *n, double a[], const double *lambda, double b[], double c[], const double *tol, double d[], Integer ipiv[], Integer *ifail)
The routine may be called by the names f01lef or nagf_matop_real_gen_tridiag_lu.

3 Description

The matrix T-λI, where T is a real n by n tridiagonal matrix, is factorized as
T-λI=PLU,  
where P is a permutation matrix, L is a unit lower triangular matrix with at most one nonzero subdiagonal element per column, and U is an upper triangular matrix with at most two nonzero superdiagonal elements per column.
The factorization is obtained by Gaussian elimination with partial pivoting and implicit row scaling.
An indication of whether or not the matrix T-λI is nearly singular is returned in the nth element of the array ipiv. If it is important that T-λI is nonsingular, as is usually the case when solving a system of tridiagonal equations, then it is strongly recommended that ipivn is inspected on return from f01lef. (See the argument ipiv and Section 9 for further details.)
The argument λ is included in the routine so that f01lef may be used, in conjunction with f04lef, to obtain eigenvectors of T by inverse iteration.

4 References

Wilkinson J H (1965) The Algebraic Eigenvalue Problem Oxford University Press, Oxford
Wilkinson J H and Reinsch C (1971) Handbook for Automatic Computation II, Linear Algebra Springer–Verlag

5 Arguments

1: n Integer Input
On entry: n, the order of the matrix T.
Constraint: n1.
2: an Real (Kind=nag_wp) array Input/Output
On entry: the diagonal elements of T.
On exit: the diagonal elements of the upper triangular matrix U.
3: lambda Real (Kind=nag_wp) Input
On entry: the scalar λ. f01lef factorizes T-λI.
4: bn Real (Kind=nag_wp) array Input/Output
On entry: the superdiagonal elements of T, stored in b2 to bn; b1 is not used.
On exit: the elements of the first superdiagonal of U, stored in b2 to bn.
5: cn Real (Kind=nag_wp) array Input/Output
On entry: the subdiagonal elements of T, stored in c2 to cn; c1 is not used.
On exit: the subdiagonal elements of L, stored in c2 to cn.
6: tol Real (Kind=nag_wp) Input
On entry: a relative tolerance used to indicate whether or not the matrix (T-λI) is nearly singular. tol should normally be chosen as approximately the largest relative error in the elements of T. For example, if the elements of T are correct to about 4 significant figures, then tol should be set to about 5×10-4. See Section 9 for further details on how tol is used. If tol is supplied as less than ε, where ε is the machine precision, then the value ε is used in place of tol.
7: dn Real (Kind=nag_wp) array Output
On exit: the elements of the second superdiagonal of U, stored in d3 to dn; d1 and d2 are not used.
8: ipivn Integer array Output
On exit: details of the permutation matrix P. If an interchange occurred at the kth step of the elimination, then ipivk=1, otherwise ipivk=0. If a diagonal element of U is small, indicating that T-λI is nearly singular, then the element ipivn is returned as positive. Otherwise ipivn is returned as 0. See Section 9 for further details. If the application is such that it is important that T-λI is not nearly singular, then it is strongly recommended that ipivn is inspected on return.
9: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, n=value.
Constraint: n1.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The computed factorization will satisfy the equation
PLU=T-λI+E,  
where
E1 9×maxij lij,lij2 ε T-λ I1  
where ε is the machine precision.

8 Parallelism and Performance

f01lef makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The time taken by f01lef is approximately proportional to n.
The factorization of a tridiagonal matrix proceeds in n-1 steps, each step eliminating one subdiagonal element of the tridiagonal matrix. In order to avoid small pivot elements and to prevent growth in the size of the elements of L, rows k and (k+1) will, if necessary, be interchanged at the kth step prior to the elimination.
The element ipivn returns the smallest integer, j, for which
ujjT-λIj1×tol,  
where T-λIj1 denotes the sum of the absolute values of the jth row of the matrix (T-λI). If no such j exists, then ipivn is returned as zero. If such a j exists, then ujj is small and hence (T-λI) is singular or nearly singular.
This routine may be followed by f04lef to solve systems of tridiagonal equations. If you wish to solve single systems of tridiagonal equations you should be aware of f07caf, which solves tridiagonal systems with a single call. f07caf requires less storage and will generally be faster than the combination of f01lef and f04lef, but no test for near singularity is included in f07caf and so it should only be used when the equations are known to be nonsingular.

10 Example

This example factorizes the tridiagonal matrix T where
T= 3.0 2.1 0 0 0 3.4 2.3 -1.0 0 0 0 3.6 -5.0 1.9 0 0 0 7.0 -0.9 8.0 0 0 0 -6.0 7.1  
and then to solve the equations Tx=y, where
y= 2.7 -0.5 2.6 0.6 2.7  
by a call to f04lef. The example program sets tol=5×10-5 and, of course, sets lambda=0.

10.1 Program Text

Program Text (f01lefe.f90)

10.2 Program Data

Program Data (f01lefe.d)

10.3 Program Results

Program Results (f01lefe.r)