NAG CL Interface
f01sac (real_​nmf)

1 Purpose

f01sac computes a non-negative matrix factorization for a real non-negative m by n matrix A.

2 Specification

#include <nag.h>
void  f01sac (Integer m, Integer n, Integer k, const double a[], Integer pda, double w[], Integer pdw, double h[], Integer pdh, Integer seed, double errtol, Integer maxit, NagError *fail)
The function may be called by the names: f01sac or nag_matop_real_nmf.

3 Description

The matrix A is factorized into the product of an m by k matrix W and a k by n matrix H, both with non-negative elements. The factorization is approximate, AWH, with W and H chosen to minimize the functional
fW,H = A-WH F 2 .  
You are free to choose any value for k, provided k<minm,n. The product WH will then be a low-rank approximation to A, with rank at most k.
f01sac finds W and H using an iterative method known as the Hierarchical Alternating Least Squares algorithm. You may specify initial values for W and H, or you may provide a seed value for f01sac to generate the initial values using a random number generator.

4 References

Cichocki A and Phan A–H (2009) Fast local algorithms for large scale nonnegative matrix and tensor factorizations IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences E92–A 708–721
Cichocki A, Zdunek R and Amari S–I (2007) Hierarchical ALS algorithms for nonnegative matrix and 3D tensor factorization Lecture Notes in Computer Science 4666 Springer 169–176
Ho N–D (2008) Nonnegative matrix factorization algorithms and applications PhD Thesis Univ. Catholique de Louvain

5 Arguments

1: m Integer Input
On entry: m, the number of rows of the matrix A. Also the number of rows of the matrix W.
Constraint: m2.
2: n Integer Input
On entry: n, the number of columns of the matrix A. Also the number of columns of the matrix H.
Constraint: n2.
3: k Integer Input
On entry: k, the number of columns of the matrix W; the number of rows of the matrix H. See Section 9.2 for further details.
Constraint: 1k<minm,n.
4: a[dim] const double Input
Note: the dimension, dim, of the array a must be at least pda×n.
The i,jth element of the matrix A is stored in a[j-1×pda+i-1].
On entry: the m by n non-negative matrix A.
5: pda Integer Input
On entry: the stride separating matrix row elements in the array a.
Constraint: pdam.
6: w[dim] double Input/Output
Note: the dimension, dim, of the array w must be at least pdw×k.
The i,jth element of the matrix W is stored in w[j-1×pdw+i-1].
On entry:
  • if seed0, w should be set to an initial iterate for the non-negative matrix factor, W.
  • If seed1, w need not be set. f01sac will generate a random initial iterate.
On exit: the non-negative matrix factor, W.
7: pdw Integer Input
On entry: the stride separating matrix row elements in the array w.
Constraint: pdwm.
8: h[dim] double Input/Output
Note: the dimension, dim, of the array h must be at least pdh×n.
The i,jth element of the matrix H is stored in h[j-1×pdh+i-1].
On entry:
  • if seed0, h should be set to an initial iterate for the non-negative matrix factor, H.
  • If seed1, h need not be set. f01sac will generate a random initial iterate.
On exit: the non-negative matrix factor, H.
9: pdh Integer Input
On entry: the stride separating matrix row elements in the array h.
Constraint: pdhk.
10: seed Integer Input
On entry:
  • if seed0, the supplied values of W and H are used for the initial iterate.
  • If seed1, the value of seed is used to seed a random number generator for the initial iterates W and H. See Section 9.3 for further details.
11: errtol double Input
On entry: the convergence tolerance for when the Hierarchical Alternating Least Squares iteration has reached a stationary point. If errtol0.0, maxm,n×machine precision is used.
12: maxit Integer Input
On entry: specifies the maximum number of iterations to be used. If maxit0, 200 is used.
13: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_CONVERGENCE
The function has failed to converge after value iterations. The factorization given by w and h may still be a good enough approximation to be useful. Alternatively an improved factorization may be obtained by increasing maxit or using different initial choices of w and h.
NE_INIT_ESTIMATE
An internal error occurred when generating initial values for w and h. Please contact NAG.
NE_INT
On entry, m=value.
Constraint: m2.
On entry, n=value.
Constraint: n2.
NE_INT_2
On entry, pda=value and m=value.
Constraint: pdam.
On entry, pdh=value and k=value.
Constraint: pdhk.
On entry, pdw=value and m=value.
Constraint: pdwm.
NE_INT_3
On entry, k=value, m=value and n=value.
Constraint: 1k<minm,n.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_INVALID_ARRAY
On entry, one of more of the elements of a, w or h were negative.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.

7 Accuracy

The Hierarchical Alternating Least Squares algorithm used by f01sac is locally convergent; it is guaranteed to converge to a stationary point of fW,H, but this may not be the global minimum. The iteration is deemed to have converged if the gradient of fW,H is less than errtol times the gradient at the initial values of W and H.
Due to the local convergence property, you may wish to run f01sac multiple times with different starting iterates. This can be done by explicitly providing the starting values of W and H each time, or by choosing a different random seed for each function call.
Note that even if f01sac exits with fail.code= NE_CONVERGENCE, the factorization given by W and H may still be a good enough approximation to be useful.

8 Parallelism and Performance

f01sac is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
f01sac makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

Each iteration of the Hierarchical Alternating Least Squares algorithm requires Omnk floating-point operations.
The real allocatable memory required is m×n+km+n.
If A is large and sparse, then f01sbc should be used to compute a non-negative matrix factorization.

9.1 Uniqueness

Note that non-negative matrix factorization is not unique. For a factorization given by the matrices W and H, an equally good solution is given by WD and D-1H, where D is any real non-negative k×k matrix whose inverse is also non-negative. In f01sac, W and H are normalized so that the columns of W have unit length.

9.2 Choice of k

The most appropriate choice of the factorization rank, k, is often problem dependent. Details of your particular application may help in guiding your choice of k, for example, it may be known a priori that the data in A naturally falls into a certain number of categories.
Alternatively, trial and error can be used. Compute non-negative matrix factorizations for several different values of k (typically with kminm,n) and select the one that performs the best.
Finally, it is also possible to use a singular value decomposition of A to guide your choice of k, by looking for an abrupt decay in the size of the singular values of A. The singular value decomposition can be computed using f08kbc.

9.3 Generating Random Initial Iterates

If seed1 on entry, then f01sac uses the functions g05kfc and g05sac, with the NAG basic generator, to populate w and h. For further information on this random number generator see Section 2.1.1 in the G05 Chapter Introduction.
Note that this generator gives a repeatable sequence of random numbers, so if the value of seed is not changed between function calls, then the same initial iterates will be generated.

10 Example

This example finds a non-negative matrix factorization for the matrix
A= 8 10 5 10 5 9 21 7 17 10 12 17 8 14 6 14 18 9 16 7 13 29 10 23 13 10 17 7 14 7 .  

10.1 Program Text

Program Text (f01sace.c)

10.2 Program Data

Program Data (f01sace.d)

10.3 Program Results

Program Results (f01sace.r)