# NAG FL Interfacee04rxf (handle_​set_​get_​real)

## 1Purpose

e04rxf is a part of the NAG optimization modelling suite. It allows you to read or write a piece of information to the problem stored in the handle. For example, it may be used to extract the current approximation of the solution during a monitoring step.

## 2Specification

Fortran Interface
 Subroutine e04rxf ( rarr,
 Integer, Intent (In) :: ioflag Integer, Intent (Inout) :: lrarr, ifail Real (Kind=nag_wp), Intent (Inout) :: rarr(lrarr) Character (*), Intent (In) :: cmdstr Type (c_ptr), Intent (In) :: handle
#include <nag.h>
 void e04rxf_ (void **handle, const char *cmdstr, const Integer *ioflag, Integer *lrarr, double rarr[], Integer *ifail, const Charlen length_cmdstr)
The routine may be called by the names e04rxf or nagf_opt_handle_set_get_real.

## 3Description

e04rxf adds an additional means of communication to routines within the NAG optimization modelling suite. It allows you to either read or write a piece of information in the handle in the form of a real array. The item is identified by cmdstr and the direction of the communication is set by ioflag.
The following cmdstr are available:
Primal Variables or X
The current value of the primal variables.
Dual Variables or U
The current value of the dual variables (Lagrangian multipliers for bounds and linear constraints).
Dual Cone Variables or UC
The current value of the dual cone variables (Lagrangian multipliers for quadratic cone constraints).
The functionality is supported only by a selection of the solvers in the NAG Library, such as, e04mtf and e04ptf for the retrieval of the approximate solutions within the monitoring step or their final solutions. See the documentation of the individual solvers. See Section 3.1 in the E04 Chapter Introduction for more details about the NAG optimization modelling suite.

None.

## 5Arguments

1: $\mathbf{handle}$Type (c_ptr) Input
On entry: the handle to the problem. It needs to be initialized by e04raf and must not be changed between calls to the NAG optimization modelling suite.
2: $\mathbf{cmdstr}$Character(*) Input
On entry: a string which identifies the item within the handle to be read or written. The string is case insensitive and space tolerant.
Constraint: .
3: $\mathbf{ioflag}$Integer Input
On entry: indicates the direction of the communication.
${\mathbf{ioflag}}\ne 0$
e04rxf will extract the requested information from the handle to rarr.
${\mathbf{ioflag}}=0$
The writing mode will apply and the content of rarr will be copied to the handle.
4: $\mathbf{lrarr}$Integer Input/Output
On entry: the dimension of the array rarr.
On exit: the correct expected dimension of rarr if lrarr does not match the item identified by cmdstr (in this case e04rxf returns ${\mathbf{ifail}}={\mathbf{2}}$).
5: $\mathbf{rarr}\left({\mathbf{lrarr}}\right)$Real (Kind=nag_wp) array Input/Output
On entry: if ${\mathbf{ioflag}}=0$ (write mode), rarr must contain the information to be written to the handle; otherwise it does not need to be set.
On exit: if ${\mathbf{ioflag}}\ne 0$ (read mode), rarr contains the information requested by cmdstr; otherwise rarr is unchanged.
6: $\mathbf{ifail}$Integer Input/Output
On entry: ifail must be set to $0$, . If you are unfamiliar with this argument you should refer to Section 4 in the Introduction to the NAG Library FL Interface for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, because for this routine the values of the output arguments may be useful even if ${\mathbf{ifail}}\ne {\mathbf{0}}$ on exit, the recommended value is $-1$. When the value is used it is essential to test the value of ifail on exit.
On exit: ${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see Section 6).

## 6Error Indicators and Warnings

If on entry ${\mathbf{ifail}}=0$ or $-1$, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
Note: in some cases e04rxf may return useful information.
${\mathbf{ifail}}=1$
The supplied handle does not define a valid handle to the data structure for the NAG optimization modelling suite. It has not been initialized by e04raf or it has been corrupted.
${\mathbf{ifail}}=2$
On entry, ${\mathbf{lrarr}}=〈\mathit{\text{value}}〉$, expected $\mathrm{value}=〈\mathit{\text{value}}〉$.
Constraint: lrarr must match the size of the data identified in cmdstr.
${\mathbf{ifail}}=3$
The provided cmdstr is not recognised.
${\mathbf{ifail}}=4$
Reading mode is not supported for the given cmdstr.
${\mathbf{ifail}}=5$
Writing mode is not supported for the given cmdstr.
${\mathbf{ifail}}=6$
The request cannot be processed at this phase.
The requested information is not available.
${\mathbf{ifail}}=7$
The request cannot be processed by the current solver.
${\mathbf{ifail}}=-99$
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

Not applicable.

## 8Parallelism and Performance

e04rxf is not threaded in any implementation.

None.

## 10Example

This example demonstrates how to use e04rxf to extract the current approximation of the solution when the monitoring routine monit is called during the solve by e04mtf.
We solve the following linear programming problem:
 $-0.02x1 -0.2x2 -0.2x3 -0.2x4 -0.2x5 +0.04x6 +0.04x7$
subject to the bounds
 $-0.01≤x1≤ 0.01 -0.10≤x2≤ 0.15 -0.01≤x3≤ 0.03 -0.04≤x4≤ 0.02 -0.10≤x5≤ 0.05 -0.01≤x6 ≤ 0.00 -0.01≤x7 ≤ 0.00$
and the general constraints
 $x1 + x2 + x3 + x4 + x5 + x6 + x7 = -0.13 0.15x1 + 0.04x2 + 0.02x3 + 0.04x4 + 0.02x5 + 0.01x6 + 0.03x7 ≤ -0.0049 0.03x1 + 0.05x2 + 0.08x3 + 0.02x4 + 0.06x5 + 0.01x6 ≤ -0.0064 00.02x1 + 0.04x2 + 0.01x3 + 0.02x4 + 0.02x5 ≤ -0.0037 0.02x1 + 0.03x2 + 0.01x5 ≤ -0.0012 -0.0992 ≤ 0.70x1 + 0.75x2 + 0.80x3 + 0.75x4 + 0.80x5 + 0.97x6 -0.003 ≤ 0.02x1 + 0.06x2 + 0.08x3 + 0.12x4 + 0.02x5 + 0.01x6 + 0.97x7 ≤ -0.002.$
During the monitoring step of e04mtf, if the three convergence measures are below an acceptable threshold, the approximate solution is extracted with e04rxf and printed on the standard output.

### 10.1Program Text

Program Text (e04rxfe.f90)

### 10.2Program Data

Program Data (e04rxfe.d)

### 10.3Program Results

Program Results (e04rxfe.r)