# NAG FL Interfaced02uwf (bvp_​ps_​lin_​grid_​vals)

## 1Purpose

d02uwf interpolates from a set of function values on a supplied grid onto a set of values for a uniform grid on the same range. The interpolation is performed using barycentric Lagrange interpolation. d02uwf is primarily a utility routine to map a set of function values specified on a Chebyshev Gauss–Lobatto grid onto a uniform grid.

## 2Specification

Fortran Interface
 Subroutine d02uwf ( n, nip, x, f, xip, fip,
 Integer, Intent (In) :: n, nip Integer, Intent (Inout) :: ifail Real (Kind=nag_wp), Intent (In) :: x(n+1), f(n+1) Real (Kind=nag_wp), Intent (Out) :: xip(nip), fip(nip)
#include <nag.h>
 void d02uwf_ (const Integer *n, const Integer *nip, const double x[], const double f[], double xip[], double fip[], Integer *ifail)
The routine may be called by the names d02uwf or nagf_ode_bvp_ps_lin_grid_vals.

## 3Description

d02uwf interpolates from a set of $n+1$ function values, $f\left({x}_{\mathit{i}}\right)$, on a supplied grid, ${x}_{\mathit{i}}$, for $\mathit{i}=0,1,\dots ,n$, onto a set of $m$ values, $\stackrel{^}{f}\left({\stackrel{^}{x}}_{\mathit{j}}\right)$, on a uniform grid, ${\stackrel{^}{x}}_{\mathit{j}}$, for $\mathit{j}=1,2,\dots ,m$. The image $\stackrel{^}{x}$ has the same range as $x$, so that ${\stackrel{^}{x}}_{\mathit{j}}={x}_{\mathrm{min}}+\left(\left(\mathit{j}-1\right)/\left(m-1\right)\right)×\left({x}_{\mathrm{max}}-{x}_{\mathrm{min}}\right)$, for $\mathit{j}=1,2,\dots ,m$. The interpolation is performed using barycentric Lagrange interpolation as described in Berrut and Trefethen (2004).
d02uwf is primarily a utility routine to map a set of function values specified on a Chebyshev Gauss–Lobatto grid computed by d02ucf onto an evenly-spaced grid with the same range as the original grid.
Berrut J P and Trefethen L N (2004) Barycentric lagrange interpolation SIAM Rev. 46(3) 501–517

## 5Arguments

1: $\mathbf{n}$Integer Input
On entry: $n$, where the number of grid points for the input data is $n+1$.
Constraint: ${\mathbf{n}}>0$ and n is even.
2: $\mathbf{nip}$Integer Input
On entry: the number, $m$, of grid points in the uniform mesh $\stackrel{^}{x}$ onto which function values are interpolated. If ${\mathbf{nip}}=1$ then on successful exit from d02uwf, ${\mathbf{fip}}\left(1\right)$ will contain the value $f\left({x}_{n}\right)$.
Constraint: ${\mathbf{nip}}>0$.
3: $\mathbf{x}\left({\mathbf{n}}+1\right)$Real (Kind=nag_wp) array Input
On entry: the grid points, ${x}_{\mathit{i}}$, for $\mathit{i}=0,1,\dots ,n$, at which the function is specified.
Usually this should be the array of Chebyshev Gauss–Lobatto points returned in d02ucf.
4: $\mathbf{f}\left({\mathbf{n}}+1\right)$Real (Kind=nag_wp) array Input
On entry: the function values, $f\left({x}_{\mathit{i}}\right)$, for $\mathit{i}=0,1,\dots ,n$.
5: $\mathbf{xip}\left({\mathbf{nip}}\right)$Real (Kind=nag_wp) array Output
On exit: the evenly-spaced grid points, ${\stackrel{^}{x}}_{\mathit{j}}$, for $\mathit{j}=1,2,\dots ,m$.
6: $\mathbf{fip}\left({\mathbf{nip}}\right)$Real (Kind=nag_wp) array Output
On exit: the set of interpolated values $\stackrel{^}{f}\left({\stackrel{^}{x}}_{\mathit{j}}\right)$, for $\mathit{j}=1,2,\dots ,m$. Here $\stackrel{^}{f}\left({\stackrel{^}{x}}_{\mathit{j}}\right)\approx f\left(x={\stackrel{^}{x}}_{\mathit{j}}\right)$.
7: $\mathbf{ifail}$Integer Input/Output
On entry: ifail must be set to $0$, . If you are unfamiliar with this argument you should refer to Section 4 in the Introduction to the NAG Library FL Interface for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is $0$. When the value is used it is essential to test the value of ifail on exit.
On exit: ${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see Section 6).

## 6Error Indicators and Warnings

If on entry ${\mathbf{ifail}}=0$ or $-1$, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
${\mathbf{ifail}}=1$
On entry, ${\mathbf{n}}=〈\mathit{\text{value}}〉$.
Constraint: ${\mathbf{n}}>0$.
On entry, ${\mathbf{n}}=〈\mathit{\text{value}}〉$.
Constraint: n is even.
${\mathbf{ifail}}=2$
On entry, ${\mathbf{nip}}=〈\mathit{\text{value}}〉$.
Constraint: ${\mathbf{nip}}>0$.
${\mathbf{ifail}}=-99$
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

## 7Accuracy

d02uwf is intended, primarily, for use with Chebyshev Gauss–Lobatto input grids. For such input grids and for well-behaved functions (no discontinuities, peaks or cusps), the accuracy should be a small multiple of machine precision.

## 8Parallelism and Performance

d02uwf is not threaded in any implementation.

None.

## 10Example

This example interpolates the function $x+\mathrm{cos}\left(5x\right)$, as specified on a $65$-point Gauss–Lobatto grid on $\left[-1,1\right]$, onto a coarse uniform grid.

### 10.1Program Text

Program Text (d02uwfe.f90)

### 10.2Program Data

Program Data (d02uwfe.d)

### 10.3Program Results

Program Results (d02uwfe.r)