NAG FL Interface
c06ppf (fft_​realherm_​1d_​multi_​row)

1 Purpose

c06ppf computes the discrete Fourier transforms of m sequences, each containing n real data values or a Hermitian complex sequence stored in a complex storage format.

2 Specification

Fortran Interface
Subroutine c06ppf ( direct, m, n, x, work, ifail)
Integer, Intent (In) :: m, n
Integer, Intent (Inout) :: ifail
Real (Kind=nag_wp), Intent (Inout) :: x(m*(n+2)), work(*)
Character (1), Intent (In) :: direct
C Header Interface
#include <nag.h>
void  c06ppf_ (const char *direct, const Integer *m, const Integer *n, double x[], double work[], Integer *ifail, const Charlen length_direct)
The routine may be called by the names c06ppf or nagf_sum_fft_realherm_1d_multi_row.

3 Description

Given m sequences of n real data values xjp , for j=0,1,,n-1 and p=1,2,,m, c06ppf simultaneously calculates the Fourier transforms of all the sequences defined by
z^ k p = 1n j=0 n-1 xjp × exp -i 2πjkn ,   k= 0, 1, , n-1 ​ and ​ p= 1, 2, , m.  
The transformed values z^kp are complex, but for each value of p the z^kp form a Hermitian sequence (i.e., z^n-kp is the complex conjugate of z^kp ), so they are completely determined by mn real numbers (since z^0p is real, as is z^ n/2 p for n even).
Alternatively, given m Hermitian sequences of n complex data values zjp , this routine simultaneously calculates their inverse (backward) discrete Fourier transforms defined by
x^kp = 1n j=0 n-1 zjp × exp i 2πjkn ,   k=0,1,,n-1 ​ and ​ p=1,2,,m .  
The transformed values x^kp are real.
(Note the scale factor 1n in the above definition.)
A call of c06ppf with direct='F' followed by a call with direct='B' will restore the original data.
The routine uses a variant of the fast Fourier transform (FFT) algorithm (see Brigham (1974)) known as the Stockham self-sorting algorithm, which is described in Temperton (1983). Special coding is provided for the factors 2, 3, 4 and 5.

4 References

Brigham E O (1974) The Fast Fourier Transform Prentice–Hall
Temperton C (1983) Fast mixed-radix real Fourier transforms J. Comput. Phys. 52 340–350

5 Arguments

1: direct Character(1) Input
On entry: if the forward transform as defined in Section 3 is to be computed, direct must be set equal to 'F'.
If the backward transform is to be computed, direct must be set equal to 'B'.
Constraint: direct='F' or 'B'.
2: m Integer Input
On entry: m, the number of sequences to be transformed.
Constraint: m1.
3: n Integer Input
On entry: n, the number of real or complex values in each sequence.
Constraint: n1.
4: x m×n+2 Real (Kind=nag_wp) array Input/Output
On entry: the data must be stored such that consecutive elements of the same sequence are stored with a stride of m and corresponding elements of different sequences are stored consecutively. An additional two spaces are reserved for each sequence to allow for the pairwise storage of real and imaginary parts in the transformed domain. In other words, if the data values of the pth sequence to be transformed are denoted by xjp, for j=0,1,,n-1:
  • if direct='F', xj×m+p must contain xjp, for j=0,1,,n-1 and p=1,2,,m;
  • if direct='B', x2×k×m+p and x 2×k+1 × m+p must contain the real and imaginary parts respectively of z^kp, for k=0,1,,n/2 and p=1,2,,m. (Note that for the sequence z^kp to be Hermitian, the imaginary part of z^0p, and of z^ n/2 p for n even, must be zero.)
On exit:
  • if direct='F' then x2×k×m+p and x2×k+1×m+p will contain the real and imaginary parts respectively of z^kp, for k=0,1,,n/2 and p=1,2,,m;
  • if direct='B' then xj×m+p will contain xjp, for j=0,1,,n-1 and p=1,2,,m;
5: work* Real (Kind=nag_wp) array Workspace
Note: the dimension of the array work must be at least m×n + 2×n + 2×m + 15.
The workspace requirements as documented for c06ppf may be an overestimate in some implementations.
On exit: work1 contains the minimum workspace required for the current values of m and n with this implementation.
6: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1. If you are unfamiliar with this argument you should refer to Section 4 in the Introduction to the NAG Library FL Interface for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1 or 1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, m=value.
Constraint: m1.
ifail=2
On entry, n=value.
Constraint: n1.
ifail=3
On entry, direct=value.
Constraint: direct='F' or 'B'.
ifail=4
An internal error has occurred in this routine. Check the routine call and any array sizes. If the call is correct then please contact NAG for assistance.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Some indication of accuracy can be obtained by performing a subsequent inverse transform and comparing the results with the original sequence (in exact arithmetic they would be identical).

8 Parallelism and Performance

c06ppf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
c06ppf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The time taken by c06ppf is approximately proportional to nm logn, but also depends on the factors of n. c06ppf is fastest if the only prime factors of n are 2, 3 and 5, and is particularly slow if n is a large prime, or has large prime factors.

10 Example

This example reads in sequences of real data values and prints their discrete Fourier transforms (as computed by c06ppf with direct='F'), after expanding them from complex Hermitian form into a full complex sequences. Inverse transforms are then calculated by calling c06ppf with direct='B' showing that the original sequences are restored.

10.1 Program Text

Program Text (c06ppfe.f90)

10.2 Program Data

Program Data (c06ppfe.d)

10.3 Program Results

Program Results (c06ppfe.r)