NAG CL Interface
f07anc (zgesv)

1 Purpose

f07anc computes the solution to a complex system of linear equations
AX=B ,  
where A is an n by n matrix and X and B are n by r matrices.

2 Specification

#include <nag.h>
void  f07anc (Nag_OrderType order, Integer n, Integer nrhs, Complex a[], Integer pda, Integer ipiv[], Complex b[], Integer pdb, NagError *fail)
The function may be called by the names: f07anc, nag_lapacklin_zgesv or nag_zgesv.

3 Description

f07anc uses the LU decomposition with partial pivoting and row interchanges to factor A as
A=PLU ,  
where P is a permutation matrix, L is unit lower triangular, and U is upper triangular. The factored form of A is then used to solve the system of equations AX=B.

4 References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia https://www.netlib.org/lapack/lug
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5 Arguments

1: order Nag_OrderType Input
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.1.3 in the Introduction to the NAG Library CL Interface for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2: n Integer Input
On entry: n, the number of linear equations, i.e., the order of the matrix A.
Constraint: n0.
3: nrhs Integer Input
On entry: r, the number of right-hand sides, i.e., the number of columns of the matrix B.
Constraint: nrhs0.
4: a[dim] Complex Input/Output
Note: the dimension, dim, of the array a must be at least max1,pda×n.
The i,jth element of the matrix A is stored in
  • a[j-1×pda+i-1] when order=Nag_ColMajor;
  • a[i-1×pda+j-1] when order=Nag_RowMajor.
On entry: the n by n coefficient matrix A.
On exit: the factors L and U from the factorization A=PLU; the unit diagonal elements of L are not stored.
5: pda Integer Input
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraint: pdamax1,n.
6: ipiv[n] Integer Output
On exit: if no constraints are violated, the pivot indices that define the permutation matrix P; at the ith step row i of the matrix was interchanged with row ipiv[i-1]. ipiv[i-1]=i indicates a row interchange was not required.
7: b[dim] Complex Input/Output
Note: the dimension, dim, of the array b must be at least
  • max1,pdb×nrhs when order=Nag_ColMajor;
  • max1,n×pdb when order=Nag_RowMajor.
The i,jth element of the matrix B is stored in
  • b[j-1×pdb+i-1] when order=Nag_ColMajor;
  • b[i-1×pdb+j-1] when order=Nag_RowMajor.
On entry: the n by r right-hand side matrix B.
On exit: if fail.code= NE_NOERROR, the n by r solution matrix X.
8: pdb Integer Input
On entry: the stride separating row or column elements (depending on the value of order) in the array b.
Constraints:
  • if order=Nag_ColMajor, pdbmax1,n;
  • if order=Nag_RowMajor, pdbmax1,nrhs.
9: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, n=value.
Constraint: n0.
On entry, nrhs=value.
Constraint: nrhs0.
On entry, pda=value.
Constraint: pda>0.
On entry, pdb=value.
Constraint: pdb>0.
NE_INT_2
On entry, pda=value and n=value.
Constraint: pdamax1,n.
On entry, pdb=value and n=value.
Constraint: pdbmax1,n.
On entry, pdb=value and nrhs=value.
Constraint: pdbmax1,nrhs.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
NE_SINGULAR
Element value of the diagonal is exactly zero. The factorization has been completed, but the factor U is exactly singular, so the solution could not be computed.

7 Accuracy

The computed solution for a single right-hand side, x^ , satisfies the equation of the form
A+E x^=b ,  
where
E1 = Oε A1  
and ε is the machine precision. An approximate error bound for the computed solution is given by
x^ - x 1 x 1 κA E 1 A 1  
where κA = A-1 1 A 1 , the condition number of A with respect to the solution of the linear equations. See Section 4.4 of Anderson et al. (1999) for further details.
Following the use of f07anc, f07auc can be used to estimate the condition number of A and f07avc can be used to obtain approximate error bounds. Alternatives to f07anc, which return condition and error estimates directly are f04cac and f07apc.

8 Parallelism and Performance

f07anc is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
f07anc makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The total number of floating-point operations is approximately 83 n3 + 8n2 r , where r is the number of right-hand sides.
The real analogue of this function is f07aac.

10 Example

This example solves the equations
Ax = b ,  
where A is the general matrix
A = -1.34+2.55i 0.28+3.17i -6.39-2.20i 0.72-0.92i -0.17-1.41i 3.31-0.15i -0.15+1.34i 1.29+1.38i -3.29-2.39i -1.91+4.42i -0.14-1.35i 1.72+1.35i 2.41+0.39i -0.56+1.47i -0.83-0.69i -1.96+0.67i   and   b = 26.26+51.78i 6.43-08.68i -5.75+25.31i 1.16+02.57i .  
Details of the LU factorization of A are also output.

10.1 Program Text

Program Text (f07ance.c)

10.2 Program Data

Program Data (f07ance.d)

10.3 Program Results

Program Results (f07ance.r)