NAG FL Interface
d02cjf (ivp_​adams_​zero_​simple)

Settings help

FL Name Style:


FL Specification Language:


1 Purpose

d02cjf integrates a system of first-order ordinary differential equations over a range with suitable initial conditions, using a variable-order, variable-step Adams' method until a user-specified function, if supplied, of the solution is zero, and returns the solution at points specified by you, if desired.

2 Specification

Fortran Interface
Subroutine d02cjf ( x, xend, n, y, fcn, tol, relabs, output, g, w, ifail)
Integer, Intent (In) :: n
Integer, Intent (Inout) :: ifail
Real (Kind=nag_wp), External :: g
Real (Kind=nag_wp), Intent (In) :: xend, tol
Real (Kind=nag_wp), Intent (Inout) :: x, y(n)
Real (Kind=nag_wp), Intent (Out) :: w(28+21*n)
Character (1), Intent (In) :: relabs
External :: fcn, output
C Header Interface
#include <nag.h>
void  d02cjf_ (double *x, const double *xend, const Integer *n, double y[],
void (NAG_CALL *fcn)(const double *x, const double y[], double f[]),
const double *tol, const char *relabs,
void (NAG_CALL *output)(double *xsol, const double y[]),
double (NAG_CALL *g)(const double *x, const double y[]),
double w[], Integer *ifail, const Charlen length_relabs)
The routine may be called by the names d02cjf or nagf_ode_ivp_adams_zero_simple.

3 Description

d02cjf advances the solution of a system of ordinary differential equations
yi=fi(x,y1,y2,,yn),  i=1,2,,n,  
from x=x to x=xend using a variable-order, variable-step Adams' method. The system is defined by fcn, which evaluates fi in terms of x and y1,y2,,yn. The initial values of y1,y2,,yn must be given at x=x.
The solution is returned via output at points specified by you, if desired: this solution is obtained by C1 interpolation on solution values produced by the method. As the integration proceeds a check can be made on the user-specified function g(x,y) to determine an interval where it changes sign. The position of this sign change is then determined accurately by C1 interpolation to the solution. It is assumed that g(x,y) is a continuous function of the variables, so that a solution of g(x,y)=0.0 can be determined by searching for a change in sign in g(x,y). The accuracy of the integration, the interpolation and, indirectly, of the determination of the position where g(x,y)=0.0, is controlled by the arguments tol and relabs.
For a description of Adams' methods and their practical implementation see Hall and Watt (1976).

4 References

Hall G and Watt J M (ed.) (1976) Modern Numerical Methods for Ordinary Differential Equations Clarendon Press, Oxford

5 Arguments

1: x Real (Kind=nag_wp) Input/Output
On entry: the initial value of the independent variable x.
Constraint: xxend.
On exit: if g is supplied by you, it contains the point where g(x,y)=0.0, unless g(x,y)0.0 anywhere on the range x to xend, in which case, x will contain xend. If g is not supplied by you it contains xend, unless an error has occurred, when it contains the value of x at the error.
2: xend Real (Kind=nag_wp) Input
On entry: the final value of the independent variable. If xend<x, integration will proceed in the negative direction.
Constraint: xendx.
3: n Integer Input
On entry: n, the number of differential equations.
Constraint: n1.
4: y(n) Real (Kind=nag_wp) array Input/Output
On entry: the initial values of the solution y1,y2,,yn at x=x.
On exit: the computed values of the solution at the final point x=x.
5: fcn Subroutine, supplied by the user. External Procedure
fcn must evaluate the functions fi (i.e., the derivatives yi) for given values of its arguments x,y1,,yn.
The specification of fcn is:
Fortran Interface
Subroutine fcn ( x, y, f)
Real (Kind=nag_wp), Intent (In) :: x, y(*)
Real (Kind=nag_wp), Intent (Inout) :: f(*)
C Header Interface
void  fcn (const double *x, const double y[], double f[])
1: x Real (Kind=nag_wp) Input
On entry: x, the value of the independent variable.
2: y(*) Real (Kind=nag_wp) array Input
Note: the dimension, n, of y is n as in the call of d02cjf.
On entry: yi, for i=1,2,,n, the value of the variable.
3: f(*) Real (Kind=nag_wp) array Output
Note: the dimension, n, of f is n as in the call of d02cjf.
On exit: the value of fi, for i=1,2,,n.
fcn must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d02cjf is called. Arguments denoted as Input must not be changed by this procedure.
Note: fcn should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d02cjf. If your code inadvertently does return any NaNs or infinities, d02cjf is likely to produce unexpected results.
6: tol Real (Kind=nag_wp) Input
On entry: a positive tolerance for controlling the error in the integration. Hence tol affects the determination of the position where g(x,y)=0.0, if g is supplied.
d02cjf has been designed so that, for most problems, a reduction in tol leads to an approximately proportional reduction in the error in the solution. However, the actual relation between tol and the accuracy achieved cannot be guaranteed. You are strongly recommended to call d02cjf with more than one value for tol and to compare the results obtained to estimate their accuracy. In the absence of any prior knowledge, you might compare the results obtained by calling d02cjf with tol=10.0-p and tol=10.0-p-1 where p correct decimal digits are required in the solution.
Constraint: tol>0.0.
7: relabs Character(1) Input
On entry: the type of error control. At each step in the numerical solution an estimate of the local error, est, is made. For the current step to be accepted the following condition must be satisfied:
est=i=1n(ei/(τr×|yi|+τa))21.0  
where τr and τa are defined by
relabs τr τa
'M' tol tol
'A' 0.0 tol
'R' tol ε
'D' tol tol
where ε is a small machine-dependent number and ei is an estimate of the local error at yi, computed internally. If the appropriate condition is not satisfied, the step size is reduced and the solution is recomputed on the current step. If you wish to measure the error in the computed solution in terms of the number of correct decimal places, relabs should be set to 'A' on entry, whereas if the error requirement is in terms of the number of correct significant digits, relabs should be set to 'R'. If you prefer a mixed error test, relabs should be set to 'M', otherwise if you have no preference, relabs should be set to the default 'D'. Note that in this case 'D' is taken to be 'M'.
Constraint: relabs='M', 'A', 'R' or 'D'.
8: output Subroutine, supplied by the NAG Library or the user. External Procedure
output permits access to intermediate values of the computed solution (for example to print or plot them), at successive user-specified points. It is initially called by d02cjf with xsol=x (the initial value of x). You must reset xsol to the next point (between the current xsol and xend) where output is to be called, and so on at each call to output. If, after a call to output, the reset point xsol is beyond xend, d02cjf will integrate to xend with no further calls to output; if a call to output is required at the point xsol=xend, xsol must be given precisely the value xend.
The specification of output is:
Fortran Interface
Subroutine output ( xsol, y)
Real (Kind=nag_wp), Intent (In) :: y(*)
Real (Kind=nag_wp), Intent (Inout) :: xsol
C Header Interface
void  output (double *xsol, const double y[])
1: xsol Real (Kind=nag_wp) Input/Output
On entry: the output value of the independent variable x.
On exit: you must set xsol to the next value of x at which output is to be called.
2: y(*) Real (Kind=nag_wp) array Input
Note: the dimension, n, of y is n as in the call of d02cjf.
On entry: the computed solution at the point xsol.
output must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d02cjf is called. Arguments denoted as Input must not be changed by this procedure.
Note: output should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d02cjf. If your code inadvertently does return any NaNs or infinities, d02cjf is likely to produce unexpected results.
If you do not wish to access intermediate output, the actual argument output must be the dummy routine d02cjx. (d02cjx is included in the NAG Library.)
9: g real (Kind=nag_wp) Function, supplied by the user. External Procedure
g must evaluate the function g(x,y) for specified values x,y. It specifies the function g for which the first position x where g(x,y)=0 is to be found.
The specification of g is:
Fortran Interface
Function g ( x, y)
Real (Kind=nag_wp) :: g
Real (Kind=nag_wp), Intent (In) :: x, y(*)
C Header Interface
double  g (const double *x, const double y[])
1: x Real (Kind=nag_wp) Input
On entry: x, the value of the independent variable.
2: y(*) Real (Kind=nag_wp) array Input
Note: the dimension, n, of y is n as in the call of d02cjf.
On entry: yi, for i=1,2,,n, the value of the variable.
g must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d02cjf is called. Arguments denoted as Input must not be changed by this procedure.
Note: g should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d02cjf. If your code inadvertently does return any NaNs or infinities, d02cjf is likely to produce unexpected results.
If you do not require the root-finding option, the actual argument g must be the dummy routine d02cjw. (d02cjw is included in the NAG Library.)
10: w(28+21×n) Real (Kind=nag_wp) array Workspace
11: ifail Integer Input/Output
On entry: ifail must be set to 0, −1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of −1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value −1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or −1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, n=value.
Constraint: n1.
On entry, relabs=value.
Constraint: relabs='M', 'A', 'R' or 'D'.
On entry, tol=value.
Constraint: tol>0.0.
On entry, x=value and xend=value.
Constraint: xxend.
ifail=2
Integration successful as far as x=value, but further progress not possible with the input value of tol=value.
With the given value of tol, no further progress can be made across the integration range from the current point x=x. (See Section 9 for a discussion of this error exit.) The components y(1),y(2),,y(n) contain the computed values of the solution at the current point x=x. If you have supplied g, no point at which g(x,y) changes sign has been located up to the point x=x.
ifail=3
No integration steps have been taken. Progress not possible with the input value of tol=value.
ifail=4
On the first call to output, xsol remained unchanged.
On the first call to output, xsol was returned as value, which is inconsistent with (x,xend)(value,value).
ifail=5
On a call to output, xsol remained unchanged.
xsol=value.
On a call to output, xsol was returned as value, which is inconsistent with previous xsol and xend(value,value).
ifail=6
No change in sign of the function g(x,y) was detected in the integration range.
ifail=7
Impossible error — internal variable IDID=value.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The accuracy of the computation of the solution vector y may be controlled by varying the local error tolerance tol. In general, a decrease in local error tolerance should lead to an increase in accuracy. You are advised to choose relabs='M' unless you have a good reason for a different choice.
If the problem is a root-finding one, then the accuracy of the root determined will depend on the properties of g(x,y). You should try to code g without introducing any unnecessary cancellation errors.

8 Parallelism and Performance

d02cjf is not threaded in any implementation.

9 Further Comments

If more than one root is required then d02qff should be used.
If d02cjf fails with ifail=3, then it can be called again with a larger value of tol if this has not already been tried. If the accuracy requested is really needed and cannot be obtained with this routine, the system may be very stiff (see below) or so badly scaled that it cannot be solved to the required accuracy.
If d02cjf fails with ifail=2, it is probable that it has been called with a value of tol which is so small that a solution cannot be obtained on the range x to xend. This can happen for well-behaved systems and very small values of tol. You should, however, consider whether there is a more fundamental difficulty. For example:
  1. (a)in the region of a singularity (infinite value) of the solution, the routine will usually stop with ifail=2, unless overflow occurs first. Numerical integration cannot be continued through a singularity, and analytic treatment should be considered;
  2. (b)for ‘stiff’ equations where the solution contains rapidly decaying components, the routine will use very small steps in x (internally to d02cjf) to preserve stability. This will exhibit itself by making the computing time excessively long, or occasionally by an exit with ifail=2. Adams' methods are not efficient in such cases, and you should try d02ejf.

10 Example

This example illustrates the solution of four different problems. In each case the differential system (for a projectile) is
y = tanϕ v = -0.032tanϕv-0.02v cosϕ ϕ = -0.032v2  
over an interval x=0.0 to xend=10.0 starting with values y=0.5, v=0.5 and ϕ=π/5. We solve each of the following problems with local error tolerances 1.0E−4 and 1.0E−5.
  1. (i)To integrate to x=10.0 producing output at intervals of 2.0 until a point is encountered where y=0.0.
  2. (ii)As (i) but with no intermediate output.
  3. (iii)As (i) but with no termination on a root-finding condition.
  4. (iv)As (i) but with no intermediate output and no root-finding termination condition.

10.1 Program Text

Program Text (d02cjfe.f90)

10.2 Program Data

Program Data (d02cjfe.d)

10.3 Program Results

Program Results (d02cjfe.r)
GnuplotProduced by GNUPLOT 4.6 patchlevel 3 −4 −3 −2 −1 0 1 2 0 2 4 6 8 10 Solution x Example Program ODE Solution using Adams Method with Root-finding height velocity angle height = 0 gnuplot_plot_1 gnuplot_plot_2 gnuplot_plot_3 gnuplot_plot_4