NAG FL Interface
d01anf (dim1_​fin_​wtrig)

Settings help

FL Name Style:


FL Specification Language:


1 Purpose

d01anf calculates an approximation to the sine or the cosine transform of a function g over [a,b]:
I=abg(x)sin(ωx)dx  or  I=abg(x)cos(ωx)dx  
(for a user-specified value of ω).

2 Specification

Fortran Interface
Subroutine d01anf ( g, a, b, omega, key, epsabs, epsrel, result, abserr, w, lw, iw, liw, ifail)
Integer, Intent (In) :: key, lw, liw
Integer, Intent (Inout) :: ifail
Integer, Intent (Out) :: iw(liw)
Real (Kind=nag_wp), External :: g
Real (Kind=nag_wp), Intent (In) :: a, b, omega, epsabs, epsrel
Real (Kind=nag_wp), Intent (Out) :: result, abserr, w(lw)
C Header Interface
#include <nag.h>
void  d01anf_ (
double (NAG_CALL *g)(const double *x),
const double *a, const double *b, const double *omega, const Integer *key, const double *epsabs, const double *epsrel, double *result, double *abserr, double w[], const Integer *lw, Integer iw[], const Integer *liw, Integer *ifail)
The routine may be called by the names d01anf or nagf_quad_dim1_fin_wtrig.

3 Description

d01anf is based on the QUADPACK routine QFOUR (see Piessens et al. (1983)). It is an adaptive routine, designed to integrate a function of the form g(x)w(x), where w(x) is either sin(ωx) or cos(ωx). If a sub-interval has length
L=|b-a|2-l  
then the integration over this sub-interval is performed by means of a modified Clenshaw–Curtis procedure (see Piessens and Branders (1975)) if Lω>4 and l20. In this case a Chebyshev series approximation of degree 24 is used to approximate g(x), while an error estimate is computed from this approximation together with that obtained using Chebyshev series of degree 12. If the above conditions do not hold then Gauss 7-point and Kronrod 15-point rules are used. The algorithm, described in Piessens et al. (1983), incorporates a global acceptance criterion (as defined in Malcolm and Simpson (1976)) together with the
ε-algorithm (see Wynn (1956)) to perform extrapolation. The local error estimation is described in
Piessens et al. (1983).

4 References

Malcolm M A and Simpson R B (1976) Local versus global strategies for adaptive quadrature ACM Trans. Math. Software 1 129–146
Piessens R and Branders M (1975) Algorithm 002: computation of oscillating integrals J. Comput. Appl. Math. 1 153–164
Piessens R, de Doncker–Kapenga E, Überhuber C and Kahaner D (1983) QUADPACK, A Subroutine Package for Automatic Integration Springer–Verlag
Wynn P (1956) On a device for computing the em(Sn) transformation Math. Tables Aids Comput. 10 91–96

5 Arguments

1: g real (Kind=nag_wp) Function, supplied by the user. External Procedure
g must return the value of the function g at a given point x.
The specification of g is:
Fortran Interface
Function g ( x)
Real (Kind=nag_wp) :: g
Real (Kind=nag_wp), Intent (In) :: x
C Header Interface
double  g (const double *x)
1: x Real (Kind=nag_wp) Input
On entry: the point at which the function g must be evaluated.
g must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01anf is called. Arguments denoted as Input must not be changed by this procedure.
Note: g should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01anf. If your code inadvertently does return any NaNs or infinities, d01anf is likely to produce unexpected results.
2: a Real (Kind=nag_wp) Input
On entry: a, the lower limit of integration.
3: b Real (Kind=nag_wp) Input
On entry: b, the upper limit of integration. It is not necessary that a<b.
4: omega Real (Kind=nag_wp) Input
On entry: the argument ω in the weight function of the transform.
5: key Integer Input
On entry: indicates which integral is to be computed.
key=1
w(x)=cos(ωx).
key=2
w(x)=sin(ωx).
Constraint: key=1 or 2.
6: epsabs Real (Kind=nag_wp) Input
On entry: the absolute accuracy required. If epsabs is negative, the absolute value is used. See Section 7.
7: epsrel Real (Kind=nag_wp) Input
On entry: the relative accuracy required. If epsrel is negative, the absolute value is used. See Section 7.
8: result Real (Kind=nag_wp) Output
On exit: the approximation to the integral I.
9: abserr Real (Kind=nag_wp) Output
On exit: an estimate of the modulus of the absolute error, which should be an upper bound for |I-result|.
10: w(lw) Real (Kind=nag_wp) array Output
On exit: details of the computation see Section 9 for more information.
11: lw Integer Input
On entry: the dimension of the array w as declared in the (sub)program from which d01anf is called. The value of lw (together with that of liw) imposes a bound on the number of sub-intervals into which the interval of integration may be divided by the routine. The number of sub-intervals cannot exceed lw/4. The more difficult the integrand, the larger lw should be.
Suggested value: lw=800 to 2000 is adequate for most problems.
Constraint: lw4.
12: iw(liw) Integer array Output
On exit: iw(1) contains the actual number of sub-intervals used. The rest of the array is used as workspace.
13: liw Integer Input
On entry: the dimension of the array iw as declared in the (sub)program from which d01anf is called. The number of sub-intervals into which the interval of integration may be divided cannot exceed liw/2.
Suggested value: liw=lw/2.
Constraint: liw2.
14: ifail Integer Input/Output
On entry: ifail must be set to 0, −1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of −1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value −1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value −1 is recommended since useful values can be provided in some output arguments even when ifail0 on exit. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or −1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
Note: in some cases d01anf may return useful information.
ifail=1
The maximum number of subdivisions allowed with the given workspace has been reached without the accuracy requirements being achieved. Look at the integrand in order to determine the integration difficulties. If the position of a local difficulty within the interval can be determined (e.g., a singularity of the integrand or its derivative, a peak, a discontinuity, etc.) you will probably gain from splitting up the interval at this point and calling the integrator on the subranges. If necessary, another integrator, which is designed for handling the type of difficulty involved, must be used. Alternatively, consider relaxing the accuracy requirements specified by epsabs and epsrel, or increasing the amount of workspace.
ifail=2
Round-off error prevents the requested tolerance from being achieved: epsabs=value and epsrel=value.
ifail=3
Extremely bad integrand behaviour occurs around the sub-interval (value,value). The same advice applies as in the case of ifail=1.
ifail=4
Round-off error is detected in the extrapolation table. The requested tolerance cannot be achieved because the extrapolation does not increase the accuracy satisfactorily; the returned result is the best that can be obtained. The same advice applies as in the case of ifail=1.
ifail=5
The integral is probably divergent or slowly convergent.
ifail=6
On entry, key=value.
Constraint: key1 and key2.
ifail=7
On entry, liw=value.
Constraint: liw2.
On entry, lw=value.
Constraint: lw4.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

d01anf cannot guarantee, but in practice usually achieves, the following accuracy:
|I-result|tol,  
where
tol=max{|epsabs|,|epsrel|×|I|} ,  
and epsabs and epsrel are user-specified absolute and relative tolerances. Moreover, it returns the quantity abserr which in normal circumstances, satisfies
|I-result|abserrtol.  

8 Parallelism and Performance

d01anf is not threaded in any implementation.

9 Further Comments

The time taken by d01anf depends on the integrand and the accuracy required.
If ifail0 on exit, then you may wish to examine the contents of the array w, which contains the end points of the sub-intervals used by d01anf along with the integral contributions and error estimates over these sub-intervals.
Specifically, for i=1,2,,n, let ri denote the approximation to the value of the integral over the sub-interval [ai,bi] in the partition of [a,b] and ei be the corresponding absolute error estimate. Then, aibig(x)w(x)dxri and result=i=1nri unless d01anf terminates while testing for divergence of the integral (see Section 3.4.3 of Piessens et al. (1983)). In this case, result (and abserr) are taken to be the values returned from the extrapolation process. The value of n is returned in iw(1), and the values ai, bi, ei and ri are stored consecutively in the array w, that is:

10 Example

This example computes
01lnx sin(10πx)dx.  

10.1 Program Text

Program Text (d01anfe.f90)

10.2 Program Data

None.

10.3 Program Results

Program Results (d01anfe.r)