# NAG FL Interfaces17auf (airy_​ai_​real_​vector)

## ▸▿ Contents

Settings help

FL Name Style:

FL Specification Language:

## 1Purpose

s17auf returns an array of values for the Airy function, $\mathrm{Ai}\left(x\right)$.

## 2Specification

Fortran Interface
 Subroutine s17auf ( n, x, f,
 Integer, Intent (In) :: n Integer, Intent (Inout) :: ifail Integer, Intent (Out) :: ivalid(n) Real (Kind=nag_wp), Intent (In) :: x(n) Real (Kind=nag_wp), Intent (Out) :: f(n)
#include <nag.h>
 void s17auf_ (const Integer *n, const double x[], double f[], Integer ivalid[], Integer *ifail)
The routine may be called by the names s17auf or nagf_specfun_airy_ai_real_vector.

## 3Description

s17auf evaluates an approximation to the Airy function, $\mathrm{Ai}\left({x}_{i}\right)$ for an array of arguments ${x}_{\mathit{i}}$, for $\mathit{i}=1,2,\dots ,n$. It is based on a number of Chebyshev expansions:
For $x<-5$,
 $Ai(x)=a(t)sin⁡z-b(t)cos⁡z(-x)1/4$
where $z=\frac{\pi }{4}+\frac{2}{3}\sqrt{-{x}^{3}}$, and $a\left(t\right)$ and $b\left(t\right)$ are expansions in the variable $t=-2{\left(\frac{5}{x}\right)}^{3}-1$.
For $-5\le x\le 0$,
 $Ai(x)=f(t)-xg(t),$
where $f$ and $g$ are expansions in $t=-2{\left(\frac{x}{5}\right)}^{3}-1\text{.}$
For $0,
 $Ai(x)=e-3x/2y(t),$
where $y$ is an expansion in $t=4x/9-1$.
For $4.5\le x<9$,
 $Ai(x)=e-5x/2u(t),$
where $u$ is an expansion in $t=4x/9-3$.
For $x\ge 9$,
 $Ai(x)=e-zv(t)x1/4,$
where $z=\frac{2}{3}\sqrt{{x}^{3}}$ and $v$ is an expansion in $t=2\left(\frac{18}{z}\right)-1$.
For , the result is set directly to $\mathrm{Ai}\left(0\right)$. This both saves time and guards against underflow in intermediate calculations.
For large negative arguments, it becomes impossible to calculate the phase of the oscillatory function with any precision and so the routine must fail. This occurs if $x<-{\left(\frac{3}{2\epsilon }\right)}^{2/3}$, where $\epsilon$ is the machine precision.
For large positive arguments, where $\mathrm{Ai}$ decays in an essentially exponential manner, there is a danger of underflow so the routine must fail.

## 4References

NIST Digital Library of Mathematical Functions

## 5Arguments

1: $\mathbf{n}$Integer Input
On entry: $n$, the number of points.
Constraint: ${\mathbf{n}}\ge 0$.
2: $\mathbf{x}\left({\mathbf{n}}\right)$Real (Kind=nag_wp) array Input
On entry: the argument ${x}_{\mathit{i}}$ of the function, for $\mathit{i}=1,2,\dots ,{\mathbf{n}}$.
3: $\mathbf{f}\left({\mathbf{n}}\right)$Real (Kind=nag_wp) array Output
On exit: $\mathrm{Ai}\left({x}_{i}\right)$, the function values.
4: $\mathbf{ivalid}\left({\mathbf{n}}\right)$Integer array Output
On exit: ${\mathbf{ivalid}}\left(\mathit{i}\right)$ contains the error code for ${x}_{\mathit{i}}$, for $\mathit{i}=1,2,\dots ,{\mathbf{n}}$.
${\mathbf{ivalid}}\left(i\right)=0$
No error.
${\mathbf{ivalid}}\left(i\right)=1$
${x}_{i}$ is too large and positive. ${\mathbf{f}}\left(\mathit{i}\right)$ contains zero. The threshold value is the same as for ${\mathbf{ifail}}={\mathbf{1}}$ in s17agf , as defined in the the Users' Note for your implementation.
${\mathbf{ivalid}}\left(i\right)=2$
${x}_{i}$ is too large and negative. ${\mathbf{f}}\left(\mathit{i}\right)$ contains zero. The threshold value is the same as for ${\mathbf{ifail}}={\mathbf{2}}$ in s17agf , as defined in the the Users' Note for your implementation.
5: $\mathbf{ifail}$Integer Input/Output
On entry: ifail must be set to $0$, $-1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $-1$ means that an error message is printed while a value of $1$ means that it is not.
If halting is not appropriate, the value $-1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $-\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit: ${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see Section 6).

## 6Error Indicators and Warnings

If on entry ${\mathbf{ifail}}=0$ or $-1$, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
${\mathbf{ifail}}=1$
On entry, at least one value of x was invalid.
${\mathbf{ifail}}=2$
On entry, ${\mathbf{n}}=⟨\mathit{\text{value}}⟩$.
Constraint: ${\mathbf{n}}\ge 0$.
${\mathbf{ifail}}=-99$
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

## 7Accuracy

For negative arguments the function is oscillatory and hence absolute error is the appropriate measure. In the positive region the function is essentially exponential-like and here relative error is appropriate. The absolute error, $E$, and the relative error, $\epsilon$, are related in principle to the relative error in the argument, $\delta$, by
 $E≃ |xAi′(x)|δ, ε≃ | x Ai′(x) Ai(x) |δ.$
In practice, approximate equality is the best that can be expected. When $\delta$, $\epsilon$ or $E$ is of the order of the machine precision, the errors in the result will be somewhat larger.
For small $x$, errors are strongly damped by the function and hence will be bounded by the machine precision.
For moderate negative $x$, the error behaviour is oscillatory but the amplitude of the error grows like
 $amplitude (Eδ ) ∼|x|5/4π.$
However, the phase error will be growing roughly like $\frac{2}{3}\sqrt{{|x|}^{3}}$ and hence all accuracy will be lost for large negative arguments due to the impossibility of calculating sin and cos to any accuracy if $\frac{2}{3}\sqrt{{|x|}^{3}}>\frac{1}{\delta }$.
For large positive arguments, the relative error amplification is considerable:
 $ε δ ∼x3.$
This means a loss of roughly two decimal places accuracy for arguments in the region of $20$. However, very large arguments are not possible due to the danger of setting underflow and so the errors are limited in practice.

## 8Parallelism and Performance

s17auf is not threaded in any implementation.

None.

## 10Example

This example reads values of x from a file, evaluates the function at each value of ${x}_{i}$ and prints the results.

### 10.1Program Text

Program Text (s17aufe.f90)

### 10.2Program Data

Program Data (s17aufe.d)

### 10.3Program Results

Program Results (s17aufe.r)