NAG FL Interface
f12anf (complex_​init)

Settings help

FL Name Style:


FL Specification Language:


1 Purpose

f12anf is a setup routine in a suite of routines consisting of f12anf, f12apf, f12aqf, f12arf and f12asf. It is used to find some of the eigenvalues (and optionally the corresponding eigenvectors) of a standard or generalized eigenvalue problem defined by complex nonsymmetric matrices.
The suite of routines is suitable for the solution of large sparse, standard or generalized, nonsymmetric complex eigenproblems where only a few eigenvalues from a selected range of the spectrum are required.

2 Specification

Fortran Interface
Subroutine f12anf ( n, nev, ncv, icomm, licomm, comm, lcomm, ifail)
Integer, Intent (In) :: n, nev, ncv, licomm, lcomm
Integer, Intent (Inout) :: ifail
Integer, Intent (Out) :: icomm(max(1,licomm))
Complex (Kind=nag_wp), Intent (Out) :: comm(max(1,lcomm))
C Header Interface
#include <nag.h>
void  f12anf_ (const Integer *n, const Integer *nev, const Integer *ncv, Integer icomm[], const Integer *licomm, Complex comm[], const Integer *lcomm, Integer *ifail)
The routine may be called by the names f12anf or nagf_sparseig_complex_init.

3 Description

The suite of routines is designed to calculate some of the eigenvalues, λ , (and optionally the corresponding eigenvectors, x ) of a standard complex eigenvalue problem Ax = λx , or of a generalized complex eigenvalue problem Ax = λBx of order n , where n is large and the coefficient matrices A and B are sparse, complex and nonsymmetric. The suite can also be used to find selected eigenvalues/eigenvectors of smaller scale dense, complex and nonsymmetric problems.
f12anf is a setup routine which must be called before f12apf, the reverse communication iterative solver, and before f12arf, the options setting routine. f12aqf is a post-processing routine that must be called following a successful final exit from f12apf, while f12asf can be used to return additional monitoring information during the computation.
This setup routine initializes the communication arrays, sets (to their default values) all options that can be set by you via the option setting routine f12arf, and checks that the lengths of the communication arrays as passed by you are of sufficient length. For details of the options available and how to set them see Section 11.1 in f12arf.

4 References

Lehoucq R B (2001) Implicitly restarted Arnoldi methods and subspace iteration SIAM Journal on Matrix Analysis and Applications 23 551–562
Lehoucq R B and Scott J A (1996) An evaluation of software for computing eigenvalues of sparse nonsymmetric matrices Preprint MCS-P547-1195 Argonne National Laboratory
Lehoucq R B and Sorensen D C (1996) Deflation techniques for an implicitly restarted Arnoldi iteration SIAM Journal on Matrix Analysis and Applications 17 789–821
Lehoucq R B, Sorensen D C and Yang C (1998) ARPACK Users' Guide: Solution of Large-scale Eigenvalue Problems with Implicitly Restarted Arnoldi Methods SIAM, Philadelphia

5 Arguments

1: n Integer Input
On entry: the order of the matrix A (and the order of the matrix B for the generalized problem) that defines the eigenvalue problem.
Constraint: n>0.
2: nev Integer Input
On entry: the number of eigenvalues to be computed.
Constraint: 0<nev<n-1.
3: ncv Integer Input
On entry: the number of Arnoldi basis vectors to use during the computation.
At present there is no a priori analysis to guide the selection of ncv relative to nev. However, it is recommended that ncv2×nev+1. If many problems of the same type are to be solved, you should experiment with increasing ncv while keeping nev fixed for a given test problem. This will usually decrease the required number of matrix-vector operations but it also increases the work and storage required to maintain the orthogonal basis vectors. The optimal ‘cross-over’ with respect to CPU time is problem dependent and must be determined empirically.
Constraint: nev+1<ncvn.
4: icomm(max(1,licomm)) Integer array Communication Array
On exit: contains data to be communicated to the other routines in the suite.
5: licomm Integer Input
On entry: the dimension of the array icomm as declared in the (sub)program from which f12anf is called.
If licomm=-1, a workspace query is assumed and the routine only calculates the required dimensions of icomm and comm, which it returns in icomm(1) and comm(1) respectively.
Constraint: licomm140 or licomm=-1.
6: comm(max(1,lcomm)) Complex (Kind=nag_wp) array Communication Array
On exit: contains data to be communicated to the other routines in the suite.
7: lcomm Integer Input
On entry: the dimension of the array comm as declared in the (sub)program from which f12anf is called.
If lcomm=-1, a workspace query is assumed and the routine only calculates the dimensions of icomm and comm required by f12apf, which it returns in icomm(1) and comm(1) respectively.
Constraint: lcomm3×n+3×ncv×ncv+5×ncv+60 or lcomm=-1.
8: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, n =value.
Constraint: n>0.
ifail=2
On entry, nev =value.
Constraint: nev>0.
ifail=3
On entry, ncv=value, nev=value and n=value.
Constraint: ncvnev+1 and ncvn.
ifail=4
The length of the integer array icomm is too small licomm =value, but must be at least value.
ifail=5
On entry, lcomm=value, n=value and ncv=value.
Constraint: lcomm3×n+3×ncv×ncv+5×ncv+60.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Not applicable.

8 Parallelism and Performance

f12anf is not threaded in any implementation.

9 Further Comments

None.

10 Example

This example solves Ax = λx in regular mode, where A is obtained from the standard central difference discretization of the convection-diffusion operator 2u x2 + 2u y2 + ρ u x on the unit square, with zero Dirichlet boundary conditions. The eigenvalues of largest magnitude are found.

10.1 Program Text

Program Text (f12anfe.f90)

10.2 Program Data

Program Data (f12anfe.d)

10.3 Program Results

Program Results (f12anfe.r)