NAG FL Interface
e04hdf (check_​deriv2)

Settings help

FL Name Style:


FL Specification Language:


1 Purpose

e04hdf checks that a subroutine for calculating second derivatives of an objective function is consistent with a subroutine for calculating the corresponding first derivatives.

2 Specification

Fortran Interface
Subroutine e04hdf ( n, funct, h, x, g, hesl, lh, hesd, iw, liw, w, lw, ifail)
Integer, Intent (In) :: n, lh, liw, lw
Integer, Intent (Inout) :: iw(liw), ifail
Real (Kind=nag_wp), Intent (In) :: x(n)
Real (Kind=nag_wp), Intent (Inout) :: w(lw)
Real (Kind=nag_wp), Intent (Out) :: g(n), hesl(lh), hesd(n)
External :: funct, h
C Header Interface
#include <nag.h>
void  e04hdf_ (const Integer *n,
void (NAG_CALL *funct)(Integer *iflag, const Integer *n, const double xc[], double *fc, double gc[], Integer iw[], const Integer *liw, double w[], const Integer *lw),
void (NAG_CALL *h)(Integer *iflag, const Integer *n, const double xc[], double fhesl[], const Integer *lh, double fhesd[], Integer iw[], const Integer *liw, double w[], const Integer *lw),
const double x[], double g[], double hesl[], const Integer *lh, double hesd[], Integer iw[], const Integer *liw, double w[], const Integer *lw, Integer *ifail)
The routine may be called by the names e04hdf or nagf_opt_check_deriv2.

3 Description

Routines for minimizing a function F(x1,x2,,xn) of the variables x1,x2,,xn may require you to provide a subroutine to evaluate the second derivatives of F. e04hdf is designed to check the second derivatives calculated by such user-supplied subroutines. As well as the routine to be checked (h), you must supply a subroutine (funct) to evaluate the first derivatives, and a point x=(x1,x2,,xn)T at which the checks will be made. Note that e04hdf checks routines of the form required for e04lbf.
e04hdf first calls user-supplied subroutines funct and h to evaluate the first and second derivatives of F at x. The user-supplied Hessian matrix (H, say) is projected onto two orthogonal vectors y and z to give the scalars yTHy and zTHz respectively. The same projections of the Hessian matrix are also estimated by finite differences, giving
p=(yTg(x+hy)-yTg(x))/h and q=(zTg(x+hz)-zTg(x))/h  
respectively, where g() denotes the vector of first derivatives at the point in brackets and h is a small positive scalar. If the relative difference between p and yTHy or between q and zTHz is judged too large, an error indicator is set.

4 References

None.

5 Arguments

1: n Integer Input
On entry: the number n of independent variables in the objective function.
Constraint: n1.
2: funct Subroutine, supplied by the user. External Procedure
funct must evaluate the function and its first derivatives at a given point. (e04lbf gives you the option of resetting arguments of funct to cause the minimization process to terminate immediately. e04hdf will also terminate immediately, without finishing the checking process, if the argument in question is reset.)
The specification of funct is:
Fortran Interface
Subroutine funct ( iflag, n, xc, fc, gc, iw, liw, w, lw)
Integer, Intent (In) :: n, liw, lw
Integer, Intent (Inout) :: iflag, iw(liw)
Real (Kind=nag_wp), Intent (In) :: xc(n)
Real (Kind=nag_wp), Intent (Inout) :: w(lw)
Real (Kind=nag_wp), Intent (Out) :: fc, gc(n)
C Header Interface
void  funct (Integer *iflag, const Integer *n, const double xc[], double *fc, double gc[], Integer iw[], const Integer *liw, double w[], const Integer *lw)
1: iflag Integer Input/Output
On entry: to funct, iflag will be set to 2.
On exit: if you set iflag to some negative number in funct and return control to e04hdf, e04hdf will terminate immediately with ifail set to your setting of iflag.
2: n Integer Input
On entry: the number n of variables.
3: xc(n) Real (Kind=nag_wp) array Input
On entry: the point x at which the function and first derivatives are required.
4: fc Real (Kind=nag_wp) Output
On exit: unless funct resets iflag, fc must be set to the value of the objective function F at the current point x.
5: gc(n) Real (Kind=nag_wp) array Output
On exit: unless funct resets iflag, gc(j) must be set to the value of the first derivative F xj at the point x, for j=1,2,,n.
6: iw(liw) Integer array Workspace
7: liw Integer Input
8: w(lw) Real (Kind=nag_wp) array Workspace
9: lw Integer Input
These arguments are present so that funct will be of the form required by e04lbf. funct is called with e04hdf's arguments iw, liw, w, lw as these arguments. If the advice given in e04lbf is being followed, you will have no reason to examine or change any elements of iw or w. In any case, funct must not change the first 5×n elements of w.
funct must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which e04hdf is called. Arguments denoted as Input must not be changed by this procedure.
Note: funct should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by e04hdf. If your code inadvertently does return any NaNs or infinities, e04hdf is likely to produce unexpected results.
e04hcf should be used to check the first derivatives calculated by funct before e04hdf is used to check the second derivatives, since e04hdf assumes that the first derivatives are correct.
3: h Subroutine, supplied by the user. External Procedure
h must evaluate the second derivatives of the function at a given point. (As with funct, an argument can be set to cause immediate termination.)
The specification of h is:
Fortran Interface
Subroutine h ( iflag, n, xc, fhesl, lh, fhesd, iw, liw, w, lw)
Integer, Intent (In) :: n, lh, liw, lw
Integer, Intent (Inout) :: iflag, iw(liw)
Real (Kind=nag_wp), Intent (In) :: xc(n)
Real (Kind=nag_wp), Intent (Inout) :: fhesd(n), w(lw)
Real (Kind=nag_wp), Intent (Out) :: fhesl(lh)
C Header Interface
void  h (Integer *iflag, const Integer *n, const double xc[], double fhesl[], const Integer *lh, double fhesd[], Integer iw[], const Integer *liw, double w[], const Integer *lw)
1: iflag Integer Input/Output
On entry: is set to a non-negative number.
On exit: if h resets iflag to a negative number, e04hdf will terminate immediately with ifail set to your setting of iflag.
2: n Integer Input
On entry: the number n of variables.
3: xc(n) Real (Kind=nag_wp) array Input
On entry: the point x at which the second derivatives of F(x) are required.
4: fhesl(lh) Real (Kind=nag_wp) array Output
On exit: unless iflag is reset, h must place the strict lower triangle of the second derivative matrix of F (evaluated at the point x) in fhesl, stored by rows, i.e., fhesl((i-1)(i-2)/2+j) must be set to the value of 2F xixj at the point x, for i=2,3,,n and j=1,2,,i-1. (The upper triangle is not required because the matrix is symmetric.)
5: lh Integer Input
On entry: the length of the array fhesl.
6: fhesd(n) Real (Kind=nag_wp) array Input/Output
On entry: contains the value of F xj at the point x, for j=1,2,,n. Routines written to take advantage of a similar feature of e04lbf can be tested as they stand by e04hdf.
On exit: unless iflag is reset, h must place the diagonal elements of the second derivative matrix of F (evaluated at the point x) in fhesd, i.e., fhesd(j) must be set to the value of 2F xj2 at the point x, for j=1,2,,n.
7: iw(liw) Integer array Workspace
8: liw Integer Input
9: w(lw) Real (Kind=nag_wp) array Workspace
10: lw Integer Input
As in funct, these arguments correspond to the arguments iw, liw, w and lw of e04hdf. h must not change the first 5×n elements of w.
h must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which e04hdf is called. Arguments denoted as Input must not be changed by this procedure.
Note: h should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by e04hdf. If your code inadvertently does return any NaNs or infinities, e04hdf is likely to produce unexpected results.
4: x(n) Real (Kind=nag_wp) array Input
On entry: x(j), for j=1,2,,n, must contain the coordinates of a suitable point at which to check the derivatives calculated by funct. ‘Obvious’ settings, such as 0.0 or 1.0, should not be used since, at such particular points, incorrect terms may take correct values (particularly zero), so that errors could go undetected. Similarly, it is advisable that no two elements of x should be the same.
5: g(n) Real (Kind=nag_wp) array Output
On exit: unless you set iflag negative in the first call of funct, g(j) contains the value of the first derivative F xj at the point given in x, as calculated by funct, for j=1,2,,n.
6: hesl(lh) Real (Kind=nag_wp) array Output
On exit: unless you set iflag negative in h, hesl contains the strict lower triangle of the second derivative matrix of F, as evaluated by h at the point given in x, stored by rows.
7: lh Integer Input
On entry: the dimension of the array hesl as declared in the (sub)program from which e04hdf is called.
Constraint: lhmax(1,n×(n-1)/2).
8: hesd(n) Real (Kind=nag_wp) array Output
On exit: unless you set iflag negative in h, hesd contains the diagonal elements of the second derivative matrix of F, as evaluated by h at the point given in x.
9: iw(liw) Integer array Workspace
10: liw Integer Input
This array is in the argument list so that it can be used by other library routines for passing integer quantities to funct or h. It is not examined or changed by e04hdf. In general you must provide an array iw, but are advised not to use it.
On entry: the dimension of the array iw as declared in the (sub)program from which e04hdf is called.
Constraint: liw1.
11: w(lw) Real (Kind=nag_wp) array Workspace
12: lw Integer Input
On entry: the dimension of the array w as declared in the (sub)program from which e04hdf is called.
Constraint: lw5×n.
13: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value -1 is recommended since useful values can be provided in some output arguments even when ifail0 on exit. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
Note: in some cases e04hdf may return useful information.
ifail=1
On entry, lh=value and n=value.
Constraint: lhmax(1,n×n-12).
On entry, liw=value.
Constraint: liw1.
On entry, lw=value and n=value.
Constraint: lw5×n.
On entry, n=value.
Constraint: n1.
ifail=2
Large errors were found in the derivatives of F computed by funct.
ifail<0
User requested termination by setting iflag negative in funct.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

ifail is set to 2 if
|yTHy-p|h×(|yTHy|+1.0)  or ​ |zTHz-q|h×(|zTHz|+1.0)  
where h is set equal to ε (ε being the machine precision as given by x02ajf) and other quantities are as defined in Section 3.

8 Parallelism and Performance

e04hdf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

e04hdf calls h once and funct three times.

10 Example

Suppose that it is intended to use e04lbf to minimize
F= (x1+10x2) 2+5 (x3-x4) 2+ (x2-2x3) 4+10 (x1-x4) 4  
The following program could be used to check the second derivatives calculated by h required. (The call of e04hdf is preceded by a call of e04hcf to check funct which calculates the first derivatives.)

10.1 Program Text

Program Text (e04hdfe.f90)

10.2 Program Data

None.

10.3 Program Results

Program Results (e04hdfe.r)