NAG CL Interface
g05phc (times_​arma)

Settings help

CL Name Style:


1 Purpose

g05phc generates a realization of a univariate time series from an autoregressive moving average (ARMA) model. The realization may be continued or a new realization generated at subsequent calls to g05phc.

2 Specification

#include <nag.h>
void  g05phc (Nag_ModeRNG mode, Integer n, double xmean, Integer ip, const double phi[], Integer iq, const double theta[], double avar, double r[], Integer lr, Integer state[], double *var, double x[], NagError *fail)
The function may be called by the names: g05phc, nag_rand_times_arma or nag_rand_arma.

3 Description

Let the vector xt, denote a time series which is assumed to follow an autoregressive moving average (ARMA) model of the form:
xt-μ= ϕ1(xt-1-μ)+ϕ2(xt-2-μ)++ϕp(xt-p-μ)+ εt-θ1εt-1-θ2εt-2--θqεt-q  
where εt, is a residual series of independent random perturbations assumed to be Normally distributed with zero mean and variance σ2. The parameters {ϕi}, for i=1,2,,p, are called the autoregressive (AR) parameters, and {θj}, for j=1,2,,q, the moving average (MA) parameters. The parameters in the model are thus the p ϕ values, the q θ values, the mean μ and the residual variance σ2.
g05phc sets up a reference vector containing initial values corresponding to a stationary position using the method described in Tunnicliffe–Wilson (1979). The function can then return a realization of x1,x2,,xn. On a successful exit, the recent history is updated and saved in the reference vector r so that g05phc may be called again to generate a realization of xn+1,xn+2,, etc. See the description of the argument mode in Section 5 for details.
One of the initialization functions g05kfc (for a repeatable sequence if computed sequentially) or g05kgc (for a non-repeatable sequence) must be called prior to the first call to g05phc.

4 References

Knuth D E (1981) The Art of Computer Programming (Volume 2) (2nd Edition) Addison–Wesley
Tunnicliffe–Wilson G (1979) Some efficient computational procedures for high order ARMA models J. Statist. Comput. Simulation 8 301–309

5 Arguments

1: mode Nag_ModeRNG Input
On entry: a code for selecting the operation to be performed by the function.
mode=Nag_InitializeReference
Set up reference vector only.
mode=Nag_GenerateFromReference
Generate terms in the time series using reference vector set up in a prior call to g05phc.
mode=Nag_InitializeAndGenerate
Set up reference vector and generate terms in the time series.
Constraint: mode=Nag_InitializeReference, Nag_GenerateFromReference or Nag_InitializeAndGenerate.
2: n Integer Input
On entry: n, the number of observations to be generated.
Constraint: n0.
3: xmean double Input
On entry: the mean of the time series.
4: ip Integer Input
On entry: p, the number of autoregressive coefficients supplied.
Constraint: ip0.
5: phi[ip] const double Input
On entry: the autoregressive coefficients of the model, ϕ1,ϕ2,,ϕp.
6: iq Integer Input
On entry: q, the number of moving average coefficients supplied.
Constraint: iq0.
7: theta[iq] const double Input
On entry: the moving average coefficients of the model, θ1,θ2,,θq.
8: avar double Input
On entry: σ2, the variance of the Normal perturbations.
Constraint: avar0.0.
9: r[lr] double Communication Array
On entry: if mode=Nag_GenerateFromReference, the reference vector from the previous call to g05phc.
On exit: the reference vector.
10: lr Integer Input
On entry: the dimension of the array r.
Constraint: lrip+iq+6+max(ip,iq+1).
11: state[dim] Integer Communication Array
Note: the dimension, dim, of this array is dictated by the requirements of associated functions that must have been previously called. This array MUST be the same array passed as argument state in the previous call to nag_rand_init_repeatable (g05kfc) or nag_rand_init_nonrepeatable (g05kgc).
On entry: contains information on the selected base generator and its current state.
On exit: contains updated information on the state of the generator.
12: var double * Output
On exit: the proportion of the variance of a term in the series that is due to the moving-average (error) terms in the model. The smaller this is, the nearer is the model to non-stationarity.
13: x[n] double Output
On exit: contains the next n observations from the time series.
14: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, ip=value.
Constraint: ip0.
On entry, iq=value.
Constraint: iq0.
On entry, lr is not large enough, lr=value: minimum length required =value.
On entry, n=value.
Constraint: n0.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_INVALID_STATE
On entry, state vector has been corrupted or not initialized.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
NE_PREV_CALL
ip or iq is not the same as when r was set up in a previous call.
Previous value of ip=value and ip=value.
Previous value of iq=value and iq=value.
NE_REAL
On entry, avar=value.
Constraint: avar0.0.
NE_REF_VEC
Reference vector r has been corrupted or not initialized correctly.
NE_STATIONARY_AR
On entry, the AR parameters are outside the stationarity region.

7 Accuracy

Any errors in the reference vector's initial values should be very much smaller than the error term; see Tunnicliffe–Wilson (1979).

8 Parallelism and Performance

g05phc is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The time taken by g05phc is essentially of order (ip) 2.
Note:  The reference vector, r, contains a copy of the recent history of the series. If attempting to re-initialize the series by calling g05kfc or g05kgc a call to g05phc with mode=Nag_InitializeReference must also be made. In the repeatable case the calls to g05phc should be performed in the same order (at the same point(s) in simulation) every time g05kfc is used. When the generator state is saved and restored using the argument state, the time series reference vector must be saved and restored as well.
The ARMA model for a time series can also be written as:
(xn-E) = A1 (xn-1-E) + + ANA (xn-NA-E) + B1 an + + BNB an-NB+1  
where
and
This is related to the form given in Section 3 by:

10 Example

This example generates values for an autoregressive model given by
xt=0.4xt-1+0.2xt-2+εt  
where εt is a series of independent random Normal perturbations with variance 1.0. The random number generators are initialized by g05kfc and then g05phc is called to initialize a reference vector and generate a sample of ten observations.

10.1 Program Text

Program Text (g05phce.c)

10.2 Program Data

None.

10.3 Program Results

Program Results (g05phce.r)