NAG CL Interface
f16zfc (ztrmm)

Settings help

CL Name Style:


1 Purpose

f16zfc performs matrix-matrix multiplication for a complex triangular matrix.

2 Specification

#include <nag.h>
void  f16zfc (Nag_OrderType order, Nag_SideType side, Nag_UploType uplo, Nag_TransType trans, Nag_DiagType diag, Integer m, Integer n, Complex alpha, const Complex a[], Integer pda, Complex b[], Integer pdb, NagError *fail)
The function may be called by the names: f16zfc, nag_blast_ztrmm or nag_ztrmm.

3 Description

f16zfc performs one of the matrix-matrix operations
BαAB, BαATB, BαAHB, BαBA, BαBAT  or BαBAH,  
where B is an m×n complex matrix, A is a complex triangular matrix, and α is a complex scalar.

4 References

Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001) Basic Linear Algebra Subprograms Technical (BLAST) Forum Standard University of Tennessee, Knoxville, Tennessee https://www.netlib.org/blas/blast-forum/blas-report.pdf

5 Arguments

1: order Nag_OrderType Input
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.1.3 in the Introduction to the NAG Library CL Interface for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2: side Nag_SideType Input
On entry: specifies whether B is operated on from the left or the right.
side=Nag_LeftSide
B is pre-multiplied from the left.
side=Nag_RightSide
B is post-multiplied from the right.
Constraint: side=Nag_LeftSide or Nag_RightSide.
3: uplo Nag_UploType Input
On entry: specifies whether A is upper or lower triangular.
uplo=Nag_Upper
A is upper triangular.
uplo=Nag_Lower
A is lower triangular.
Constraint: uplo=Nag_Upper or Nag_Lower.
4: trans Nag_TransType Input
On entry: specifies whether the operation involves A, AT or AH.
trans=Nag_NoTrans
It involves A.
trans=Nag_Trans
It involves AT.
trans=Nag_ConjTrans
It involves AH.
Constraint: trans=Nag_NoTrans, Nag_Trans or Nag_ConjTrans.
5: diag Nag_DiagType Input
On entry: specifies whether A has nonunit or unit diagonal elements.
diag=Nag_NonUnitDiag
The diagonal elements are stored explicitly.
diag=Nag_UnitDiag
The diagonal elements are assumed to be 1 and are not referenced.
Constraint: diag=Nag_NonUnitDiag or Nag_UnitDiag.
6: m Integer Input
On entry: m, the number of rows of the matrix B; the order of A if side=Nag_LeftSide.
Constraint: m0.
7: n Integer Input
On entry: n, the number of columns of the matrix B; the order of A if side=Nag_RightSide.
Constraint: n0.
8: alpha Complex Input
On entry: the scalar α.
9: a[dim] const Complex Input
Note: the dimension, dim, of the array a must be at least
  • max(1,pda×m) when side=Nag_LeftSide;
  • max(1,pda×n) when side=Nag_RightSide.
On entry: the triangular matrix A; A is m×m if side=Nag_LeftSide, or n×n if side=Nag_RightSide.
If order=Nag_ColMajor, Aij is stored in a[(j-1)×pda+i-1].
If order=Nag_RowMajor, Aij is stored in a[(i-1)×pda+j-1].
If uplo=Nag_Upper, A is upper triangular and the elements of the array corresponding to the lower triangular part of A are not referenced.
If uplo=Nag_Lower, A is lower triangular and the elements of the array corresponding to the upper triangular part of A are not referenced.
If diag=Nag_UnitDiag, the diagonal elements of A are assumed to be 1, and are not referenced.
10: pda Integer Input
On entry: the stride separating row or column elements (depending on the value of order) of the matrix A in the array a.
Constraints:
  • if side=Nag_LeftSide, pda max(1,m) ;
  • if side=Nag_RightSide, pda max(1,n) .
11: b[dim] Complex Input/Output
Note: the dimension, dim, of the array b must be at least
  • max(1,pdb×n) when order=Nag_ColMajor;
  • max(1,m×pdb) when order=Nag_RowMajor.
If order=Nag_ColMajor, Bij is stored in b[(j-1)×pdb+i-1].
If order=Nag_RowMajor, Bij is stored in b[(i-1)×pdb+j-1].
On entry: the m×n matrix B.
If alpha=0, b need not be set.
On exit: the updated matrix B.
12: pdb Integer Input
On entry: the stride separating row or column elements (depending on the value of order) in the array b.
Constraints:
  • if order=Nag_ColMajor, pdbmax(1,m);
  • if order=Nag_RowMajor, pdbmax(1,n).
13: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_ENUM_INT_2
On entry, side=value, m=value, pda=value.
Constraint: if side=Nag_LeftSide, pda max(1,m) .
On entry, side=value, n=value, pda=value.
Constraint: if side=Nag_RightSide, pda max(1,n) .
NE_INT
On entry, m=value.
Constraint: m0.
On entry, n=value.
Constraint: n0.
NE_INT_2
On entry, pdb=value, m=value.
Constraint: pdbmax(1,m).
On entry, pdb=value and n=value.
Constraint: pdbmax(1,n).
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.

7 Accuracy

The BLAS standard requires accurate implementations which avoid unnecessary over/underflow (see Section 2.7 of Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001)).

8 Parallelism and Performance

f16zfc is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

None.

10 Example

Premultiply complex 4×2 matrix B by lower triangular 4×4 matrix A, BAB, where
A = ( 4.78+4.56i 2.00-0.30i -4.11+1.25i 2.89-1.34i 2.36-4.25i 4.15+0.80i -1.89+1.15i 0.04-3.69i -0.02+0.46i 0.33-0.26i )  
and
B = ( -5.0-2.0i 1.0+5.0i -3.0-1.0i -2.0-2.0i 2.0+1.0i 3.0+4.0i 4.0+3.0i 4.0-3.0i ) .  

10.1 Program Text

Program Text (f16zfce.c)

10.2 Program Data

Program Data (f16zfce.d)

10.3 Program Results

Program Results (f16zfce.r)