NAG CL Interface
F08 (Lapackeig)
Least Squares and Eigenvalue Problems (LAPACK)

 Contents

2  Background to the Problems
3  Choice of Available Functions
Settings help

CL Name Style:


1 Scope of the Chapter

This chapter provides functions for the solution of linear least squares problems, eigenvalue problems and singular value problems, as well as associated computations. It provides functions for:
Functions are provided for both real and complex data.
For a general introduction to the solution of linear least squares problems, you should turn first to Chapter F04. The decision trees, at the end of Chapter F04, direct you to the most appropriate functions in Chapters F04 or F08. Chapters F04 and F08 contain Black Box (or driver) functions which enable standard linear least squares problems to be solved by a call to a single function.
For a general introduction to eigenvalue and singular value problems, you should turn first to Chapter F02. The decision trees, at the end of Chapter F02, direct you to the most appropriate functions in Chapters F02 or F08. Chapters F02 and F08 contain Black Box (or driver) functions which enable standard types of problem to be solved by a call to a single function. Often functions in Chapter F02 call Chapter F08 functions to perform the necessary computational tasks.
The functions in this chapter (Chapter F08) handle only dense, band, tridiagonal and Hessenberg matrices (not matrices with more specialised structures, or general sparse matrices). The tables in Section 3 and the decision trees in Section 4 direct you to the most appropriate functions in Chapter F08.
The functions in this chapter have all been derived from the LAPACK project (see Anderson et al. (1999)). They have been designed to be efficient on a wide range of high-performance computers, without compromising efficiency on conventional serial machines.

2 Background to the Problems

This section is only a brief introduction to the numerical solution of linear least squares problems, eigenvalue and singular value problems. Consult a standard textbook for a more thorough discussion, for example Golub and Van Loan (2012).

2.1 Linear Least Squares Problems

The linear least squares problem is
minimize x b-Ax2, (1)
where A is an m×n matrix, b is a given m element vector and x is an n-element solution vector.
In the most usual case mn and rank(A)=n, so that A has full rank and in this case the solution to problem (1) is unique; the problem is also referred to as finding a least squares solution to an overdetermined system of linear equations.
When m<n and rank(A)=m, there are an infinite number of solutions x which exactly satisfy b-Ax=0. In this case it is often useful to find the unique solution x which minimizes x2, and the problem is referred to as finding a minimum norm solution to an underdetermined system of linear equations.
In the general case when we may have rank(A)<min(m,n) – in other words, A may be rank-deficient – we seek the minimum norm least squares solution x which minimizes both x2 and b-Ax2.
This chapter (Chapter F08) contains driver functions to solve these problems with a single call, as well as computational functions that can be combined with functions in Chapter F07 to solve these linear least squares problems. The next two sections discuss the factorizations that can be used in the solution of linear least squares problems.

2.2 Orthogonal Factorizations and Least Squares Problems

A number of functions are provided for factorizing a general rectangular m×n matrix A, as the product of an orthogonal matrix (unitary if complex) and a triangular (or possibly trapezoidal) matrix.
A real matrix Q is orthogonal if QTQ=I; a complex matrix Q is unitary if QHQ=I. Orthogonal or unitary matrices have the important property that they leave the 2-norm of a vector invariant, so that
x2 =Qx2,  
if Q is orthogonal or unitary. They usually help to maintain numerical stability because they do not amplify rounding errors.
Orthogonal factorizations are used in the solution of linear least squares problems. They may also be used to perform preliminary steps in the solution of eigenvalue or singular value problems, and are useful tools in the solution of a number of other problems.

2.2.1 QR factorization

The most common, and best known, of the factorizations is the QR factorization given by
A =Q ( R 0 ) ,   if ​mn,  
where R is an n×n upper triangular matrix and Q is an m×m orthogonal (or unitary) matrix. If A is of full rank n, then R is nonsingular. It is sometimes convenient to write the factorization as
A =(Q1Q2) ( R 0 )  
which reduces to
A =Q1R,  
where Q1 consists of the first n columns of Q, and Q2 the remaining m-n columns.
If m<n, R is trapezoidal, and the factorization can be written
A =Q (R1R2) ,   if ​m<n,  
where R1 is upper triangular and R2 is rectangular.
The QR factorization can be used to solve the linear least squares problem (1) when mn and A is of full rank, since
b-Ax2=QTb-QTAx2=( c1-Rx c2 )2,  
where
c ( c1 c2 )= ( Q1T b Q2T b )=QTb;  
and c1 is an n-element vector. Then x is the solution of the upper triangular system
Rx=c1.  
The residual vector r is given by
r =b-Ax=Q ( 0 c2 ) .  
The residual sum of squares r22 may be computed without forming r explicitly, since
r2 =b-Ax2=c22.  

2.2.2 LQ factorization

The LQ factorization is given by
A =(L0) Q=(L0) ( Q1 Q2 )=LQ1,   if ​mn,  
where L is m×m lower triangular, Q is n×n orthogonal (or unitary), Q1 consists of the first m rows of Q, and Q2 the remaining n-m rows.
The LQ factorization of A is essentially the same as the QR factorization of AT (AH if A is complex), since
A =(L0) QAT=QT ( LT 0 ) .  
The LQ factorization may be used to find a minimum norm solution of an underdetermined system of linear equations Ax=b where A is m×n with m<n and has rank m. The solution is given by
x =QT ( L-1b 0 ) .  

2.2.3 QR factorization with column pivoting

To solve a linear least squares problem (1) when A is not of full rank, or the rank of A is in doubt, we can perform either a QR factorization with column pivoting or a singular value decomposition.
The QR factorization with column pivoting is given by
A =Q ( R 0 ) PT,  mn,  
where Q and R are as before and P is a (real) permutation matrix, chosen (in general) so that
|r11||r22||rnn|  
and moreover, for each k,
|rkk|Rk:j,j2,  j=k+1,,n.  
If we put
R = ( R11 R12 0 R22 )  
where R11 is the leading k×k upper triangular sub-matrix of R then, in exact arithmetic, if rank(A)=k, the whole of the sub-matrix R22 in rows and columns k+1 to n would be zero. In numerical computation, the aim must be to determine an index k, such that the leading sub-matrix R11 is well-conditioned, and R22 is negligible, so that
R = ( R11 R12 0 R22 ) ( R11 R12 0 0 ) .  
Then k is the effective rank of A. See Golub and Van Loan (2012) for a further discussion of numerical rank determination.
The so-called basic solution to the linear least squares problem (1) can be obtained from this factorization as
x =P ( R11-1c^1 0 ),  
where c^1 consists of just the first k elements of c=QTb.

2.2.4 Complete orthogonal factorization

The Q R factorization with column pivoting does not enable us to compute a minimum norm solution to a rank-deficient linear least squares problem, unless R12 = 0 . However, by applying for further orthogonal (or unitary) transformations from the right to the upper trapezoidal matrix ( R11 R12 ) , R12 can be eliminated:
( R11 R12 ) Z = ( T11 0 ) .  
This gives the complete orthogonal factorization
AP = Q ( T11 0 0 0 ) ZT  
from which the minimum norm solution can be obtained as
x = P Z ( T11-1 c^1 0 ) .  

2.2.5 Updating a QR factorization

Section 2.2.1 gave the forms of the QR factorization of an m×n matrix A for the two cases mn and m<n. Taking first the case mn, the least squares solution of
Ax = b = nb1m-nb2()  
is the solution of
Rx = Q1Tb .  
If the original system is now augmented by the addition of p rows so that we require the solution of
( A B ) x = mbpb3()  
where B is p×n, then this is equivalent to finding the least squares solution of
A^ x = nnRpB() x = ( Q1Tb b3 ) = b^ .  
This now requires the QR factorization of the n+p×n triangular-rectangular matrix A^.
For the case m<nm+p, the least squares solution of the augmented system reduces to
A^x = ( B R1 R2 ) x = ( b3 QTb ) = b^ ,  
where A^ is pentagonal.
In both cases A^ can be written as a special case of a triangular-pentagonal matrix consisting of an upper triangular part on top of a rectangular part which is itself on top of a trapezoidal part. In the first case there is no trapezoidal part, in the second case a zero upper triangular part can be added, and more generally the two cases can be combined.

2.2.6 Other factorizations

The QL and RQ factorizations are given by
A = Q ( 0 L ) ,  if ​ m n ,  
and
A = ( 0 R ) Q ,  if ​ m n .  
The factorizations are less commonly used than either the QR or LQ factorizations described above, but have applications in, for example, the computation of generalized QR factorizations.

2.3 The Singular Value Decomposition

The singular value decomposition (SVD) of an m×n matrix A is given by
A =UΣVT,  (A=UΣVHin the complex case)  
where U and V are orthogonal (unitary) and Σ is an m×n diagonal matrix with real diagonal elements, σi, such that
σ1σ2σmin(m,n)0.  
The σi are the singular values of A and the first min(m,n) columns of U and V are the left and right singular vectors of A. The singular values and singular vectors satisfy
Avi=σiui  and  ATui=σivi(or ​AHui=σivi)  
where ui and vi are the ith columns of U and V respectively.
The computation proceeds in the following stages.
  1. 1.The matrix A is reduced to bidiagonal form A=U1BV1T if A is real (A=U1BV1H if A is complex), where U1 and V1 are orthogonal (unitary if A is complex), and B is real and upper bidiagonal when mn and lower bidiagonal when m<n, so that B is nonzero only on the main diagonal and either on the first superdiagonal (if mn) or the first subdiagonal (if m<n).
  2. 2.The SVD of the bidiagonal matrix B is computed as B=U2Σ V2T , where U2 and V2 are orthogonal and Σ is diagonal as described above. The singular vectors of A are then U=U1U2 and V=V1V2.
If mn, it may be more efficient to first perform a QR factorization of A, and then compute the SVD of the n×n matrix R, since if A=QR and R=UΣVT, then the SVD of A is given by A=(QU)ΣVT.
Similarly, if mn, it may be more efficient to first perform an LQ factorization of A.
This chapter supports three primary algorithms for computing the SVD of a bidiagonal matrix. They are:
  1. (i)the divide and conquer algorithm;
  2. (ii)the QR algorithm;
  3. (iii)eigenpairs of an associated symmetric tridiagonal matrix.
The divide and conquer algorithm is much faster than the QR algorithm if singular vectors of large matrices are required. If only a relatively small number (<10%) of singular values and associated singular vectors are required, then the third algorithm listed above is likely to be faster than the divide-and-conquer algorithm.

2.4 The Singular Value Decomposition and Least Squares Problems

The SVD may be used to find a minimum norm solution to a (possibly) rank-deficient linear least squares problem (1). The effective rank, k, of A can be determined as the number of singular values which exceed a suitable threshold. Let Σ^ be the leading k×k sub-matrix of Σ, and V^ be the matrix consisting of the first k columns of V. Then the solution is given by
x =V^Σ^-1c^1,  
where c^1 consists of the first k elements of c=UTb= U2T U1T b.

2.5 Generalized Linear Least Squares Problems

The simple type of linear least squares problem described in Section 2.1 can be generalized in various ways.
  1. 1.Linear least squares problems with equality constraints:
    find ​x​ to minimize ​S=c-Ax22  subject to  Bx=d,  
    where A is m×n and B is p×n, with pnm+p. The equations Bx=d may be regarded as a set of equality constraints on the problem of minimizing S. Alternatively the problem may be regarded as solving an overdetermined system of equations
    ( A B ) x= ( c d ) ,  
    where some of the equations (those involving B) are to be solved exactly, and the others (those involving A) are to be solved in a least squares sense. The problem has a unique solution on the assumptions that B has full row rank p and the matrix ( A B ) has full column rank n. (For linear least squares problems with inequality constraints, refer to Chapter E04.)
  2. 2.General Gauss–Markov linear model problems:
    minimize ​y2  subject to  d=Ax+By,  
    where A is m×n and B is m×p, with nmn+p. When B=I, the problem reduces to an ordinary linear least squares problem. When B is square and nonsingular, it is equivalent to a weighted linear least squares problem:
    find ​x​ to minimize ​B-1(d-Ax)2.  
    The problem has a unique solution on the assumptions that A has full column rank n, and the matrix (A,B) has full row rank m. Unless B is diagonal, for numerical stability it is generally preferable to solve a weighted linear least squares problem as a general Gauss–Markov linear model problem.

2.6 Generalized Orthogonal Factorization and Generalized Linear Least Squares Problems

2.6.1 Generalized QR Factorization

The generalized QR (GQR) factorization of an n×m matrix A and an n×p matrix B is given by the pair of factorizations
A = QR   and   B = QTZ ,  
where Q and Z are respectively n×n and p×p orthogonal matrices (or unitary matrices if A and B are complex). R has the form
R = mmR11n-m0() , if ​ n m ,  
or
R = nm-nnR11R12() , if ​ n < m ,  
where R11 is upper triangular. T has the form
T = p-nnn0T12() , if ​ n p ,  
or
T = pn-pT11pT21() , if ​ n > p ,  
where T12 or T21 is upper triangular.
Note that if B is square and nonsingular, the GQR factorization of A and B implicitly gives the QR factorization of the matrix B-1 A :
B-1A = ZT (T-1R)  
without explicitly computing the matrix inverse B-1 or the product B-1 A (remembering that the inverse of an invertible upper triangular matrix and the product of two upper triangular matrices is an upper triangular matrix).
The GQR factorization can be used to solve the general (Gauss–Markov) linear model problem (GLM) (see Section 2.5, but note that A and B are dimensioned differently there as m×n and p×n respectively). Using the GQR factorization of A and B, we rewrite the equation d = Ax + By as
QTd = QTAx + QTBy = Rx + TZy.  
We partition this as
( d1 d2 ) = mmR11n-m0() x + p-n+mn-mmT11T12n-m0T22() ( y1 y2 )  
where
( d1 d2 ) QTd ,  and   ( y1 y2 ) Zy .  
The GLM problem is solved by setting
y1 = 0   and   y2 = T22-1 d2  
from which we obtain the desired solutions
x = R11-1 (d1-T12y2)   and   y = ZT ( 0 y2 ) .  

2.6.2 Generalized RQ Factorization

The generalized RQ (GRQ) factorization of an m×n matrix A and a p×n matrix B is given by the pair of factorizations
A = R Q ,   B = Z T Q  
where Q and Z are respectively n×n and p×p orthogonal matrices (or unitary matrices if A and B are complex). R has the form
R = n-mmm0R12() ,  if ​ mn ,  
or
R = nm-nR11nR21() ,  if ​ m>n ,  
where R12 or R21 is upper triangular. T has the form
T = nnT11p-n0() ,   if ​ pn ,  
or
T = pn-ppT11T12() ,   if ​ p<n ,  
where T11 is upper triangular.
Note that if B is square and nonsingular, the GRQ factorization of A and B implicitly gives the RQ factorization of the matrix AB-1 :
AB-1 = (RT-1) ZT  
without explicitly computing the matrix B-1 or the product AB-1 (remembering that the inverse of an invertible upper triangular matrix and the product of two upper triangular matrices is an upper triangular matrix).
The GRQ factorization can be used to solve the linear equality-constrained least squares problem (LSE) (see Section 2.5). We use the GRQ factorization of B and A (note that B and A have swapped roles), written as
B = T Q   and   A = Z R Q .  
We write the linear equality constraints Bx=d as
T Q x = d ,  
which we partition as:
n-ppp0T12() ( x1 x2 ) = d   where   ( x1 x2 ) Qx .  
Therefore, x2 is the solution of the upper triangular system
T12 x2 = d .  
Furthermore,
Ax-c2 = ZTAx-ZTc2 = RQx-ZTc2 .  
We partition this expression as:
n-ppn-pR11R12p+m-n0R22() ( x1 x2 ) - ( c1 c2 ) ,  
where ( c1 c2 ) ZTc .
To solve the LSE problem, we set
R11 x1 + R12 x2 - c1 = 0  
which gives x1 as the solution of the upper triangular system
R11 x1 = c1 - R12 x2 .  
Finally, the desired solution is given by
x = QT ( x1 x2 ) .  

2.6.3 Generalized Singular Value Decomposition (GSVD)

The generalized (or quotient) singular value decomposition of an m×n matrix A and a p×n matrix B is given by the pair of factorizations
A = U Σ1 [0,R] QT   and   B = V Σ2 [0,R] QT .  
The matrices in these factorizations have the following properties:
Σ1 and Σ2 have the following detailed structures, depending on whether mr or m<r . In the first case, mr , then
Σ1 = klkI0l0Cm-k-l00()   and   Σ2 = kll0Sp-l00() .  
Here l is the rank of B, k=r-l , C and S are diagonal matrices satisfying C2 + S2 = I , and S is nonsingular. We may also identify α1 = = αk = 1 , αk+i = cii , for i=1,2,, l, β1 = = βk = 0 , and βk+i = sii , for i=1,2,, l . Thus, the first k generalized singular values α1 / β1 ,, αk / βk are infinite, and the remaining l generalized singular values are finite.
In the second case, when m<r ,
Σ1 = km-kk+l-mkI00m-k0C0()  
and
Σ2 = km-kk+l-mm-k0S0k+l-m00Ip-l000() .  
Again, l is the rank of B, k=r-l , C and S are diagonal matrices satisfying C2 + S2 = I , and S is nonsingular, and we may identify α1 = = αk = 1 , αk+i = cii , for i=1,2,, m-k , αm+1 = = αr = 0 , β1 = = βk = 0 , βk+i = sii , for i=1,2,, m-k and βm+1 = = βr = 1 . Thus, the first k generalized singular values α1 / β1 ,, αk / βk are infinite, and the remaining l generalized singular values are finite.
Here are some important special cases of the generalized singular value decomposition. First, if B is square and nonsingular, then r=n and the generalized singular value decomposition of A and B is equivalent to the singular value decomposition of AB-1 , where the singular values of AB-1 are equal to the generalized singular values of the pair A, B:
AB-1 = (UΣ1RQT) (VΣ2RQT) -1 = U (Σ1Σ2-1) VT .  
Second, for the matrix C, where
C ( A B )  
if the columns of C are orthonormal, then r=n, R=I and the generalized singular value decomposition of A and B is equivalent to the CS (Cosine–Sine) decomposition of C:
( A B ) = ( U 0 0 V ) ( Σ1 Σ2 ) QT .  
Third, the generalized eigenvalues and eigenvectors of ATA - λ BTB can be expressed in terms of the generalized singular value decomposition: Let
X = Q ( I 0 0 R-1 ) .  
Then
XT AT AX = ( 0 0 0 Σ1TΣ1 )   and   XT BT BX = ( 0 0 0 Σ2TΣ2 ) .  
Therefore, the columns of X are the eigenvectors of ATA - λ BTB , and ‘nontrivial’ eigenvalues are the squares of the generalized singular values (see also Section 2.8). ‘Trivial’ eigenvalues are those corresponding to the leading n-r columns of X, which span the common null space of ATA and BTB . The ‘trivial eigenvalues’ are not well defined.

2.6.4 The Full CS Decomposition of Orthogonal Matrices

In Section 2.6.3 the CS (Cosine-Sine) decomposition of an orthogonal matrix partitioned into two submatrices A and B was given by
( A B ) = ( U 0 0 V ) ( Σ1 Σ2 ) QT .  
The full CS decomposition of an m×m orthogonal matrix X partitions X into four submatrices and factorizes as
( X11 X12 X21 X22 ) = ( U1 0 0 U2 ) ( Σ11 -Σ12 Σ21 Σ22 ) ( V1 0 0 V2 ) T  
where, X11 is a p×q submatrix (which implies the dimensions of X12, X21 and X22); U1, U2, V1 and V2 are orthogonal matrices of dimensions p, m-p, q and m-q respectively; Σ11 is the p×q single-diagonal matrix
Σ11 = k11-rrq-k11k11-rI00r0C0p-k1100() ,  k11 = min(p,q)  
Σ12 is the p×m-q single-diagonal matrix
Σ12 = m-q-k12rk12-rp-k1200r0S0k12-r00I() ,  k12 = min(p,m-q) ,  
Σ21 is the m-p×q single-diagonal matrix
Σ21 = q-k21rk21-rm-p-k2100r0S0k21-r00I() ,  k21 = min(m-p,q) ,  
and, Σ21 is the m-p×q single-diagonal matrix
Σ22 = k22-rrm-q-k22k22-rI00r0C0m-p-k2200() ,  k22 = min(m-p,m-q)  
where r= min(p,m-p,q,m-q) and the missing zeros remind us that either the column or the row is missing. The r×r diagonal matrices C and S are such that C2 + S2 = I .
This is equivalent to the simultaneous singular value decomposition of the four submatrices X11, X12, X21 and X22.

2.7 Symmetric Eigenvalue Problems

The symmetric eigenvalue problem is to find the eigenvalues, λ, and corresponding eigenvectors, z0, such that
Az=λz,  A=AT,   where ​A​ is real.  
For the Hermitian eigenvalue problem we have
Az=λ z,   A=AH,   where ​ A​ is complex.  
For both problems the eigenvalues λ are real.
When all eigenvalues and eigenvectors have been computed, we write
A =ZΛZT(or ​A=ZΛZH​ if complex),  
where Λ is a diagonal matrix whose diagonal elements are the eigenvalues, and Z is an orthogonal (or unitary) matrix whose columns are the eigenvectors. This is the classical spectral factorization of A.
The basic task of the symmetric eigenproblem functions is to compute values of λ and, optionally, corresponding vectors z for a given matrix A. This computation proceeds in the following stages.
  1. 1.The real symmetric or complex Hermitian matrix A is reduced to real tridiagonal form T. If A is real symmetric this decomposition is A=QTQT with Q orthogonal and T symmetric tridiagonal. If A is complex Hermitian, the decomposition is A=QTQH with Q unitary and T, as before, real symmetric tridiagonal.
  2. 2.Eigenvalues and eigenvectors of the real symmetric tridiagonal matrix T are computed. If all eigenvalues and eigenvectors are computed, this is equivalent to factorizing T as T=SΛST, where S is orthogonal and Λ is diagonal. The diagonal entries of Λ are the eigenvalues of T, which are also the eigenvalues of A, and the columns of S are the eigenvectors of T; the eigenvectors of A are the columns of Z=QS, so that A=ZΛZT (ZΛZH when A is complex Hermitian).
This chapter supports four primary algorithms for computing eigenvalues and eigenvectors of real symmetric matrices and complex Hermitian matrices. They are:
  1. (i)the divide-and-conquer algorithm;
  2. (ii)the QR algorithm;
  3. (iii)bisection followed by inverse iteration;
  4. (iv)the Relatively Robust Representation (RRR).
The divide-and-conquer algorithm is generally more efficient than the traditional QR algorithm for computing all eigenvalues and eigenvectors, but the RRR algorithm tends to be fastest of all. For further information and references see Anderson et al. (1999).

2.8 Generalized Symmetric-definite Eigenvalue Problems

This section is concerned with the solution of the generalized eigenvalue problems Az=λBz, ABz=λz, and BAz=λz, where A and B are real symmetric or complex Hermitian and B is positive definite. Each of these problems can be reduced to a standard symmetric eigenvalue problem, using a Cholesky factorization of B as either B=LLT or B=UTU (LLH or UHU in the Hermitian case).
With B=LLT, we have
Az=λBz(L-1AL-T)(LTz)=λ(LTz).  
Hence the eigenvalues of Az=λBz are those of Cy=λy, where C is the symmetric matrix C=L-1AL-T and y=LTz. In the complex case C is Hermitian with C=L-1AL-H and y=LHz.
Table 1 summarises how each of the three types of problem may be reduced to standard form Cy=λy, and how the eigenvectors z of the original problem may be recovered from the eigenvectors y of the reduced problem. The table applies to real problems; for complex problems, transposed matrices must be replaced by conjugate-transposes.
Table 1
Reduction of generalized symmetric-definite eigenproblems to standard problems
Type of problem Factorization of B Reduction Recovery of eigenvectors
1. Az=λBz B=LLT,
B=UTU
C=L-1AL-T,
C=U-TAU-1
z=L-Ty,
z=U-1y
2. ABz=λz B=LLT,
B=UTU
C=LTAL,
C=UAUT
z=L-Ty,
z=U-1y
3. BAz=λz B=LLT,
B=UTU
C=LTAL,
C=UAUT
z=Ly,
z=UTy
When the generalized symmetric-definite problem has been reduced to the corresponding standard problem Cy=λy, this may then be solved using the functions described in the previous section. No special functions are needed to recover the eigenvectors z of the generalized problem from the eigenvectors y of the standard problem, because these computations are simple applications of Level 2 or Level 3 BLAS (see Chapter F16).

2.9 Packed Storage for Symmetric Matrices

Functions which handle symmetric matrices are usually designed so that they use either the upper or lower triangle of the matrix; it is not necessary to store the whole matrix. If either the upper or lower triangle is stored conventionally in the upper or lower triangle of a two-dimensional array, the remaining elements of the array can be used to store other useful data. However, that is not always convenient, and if it is important to economize on storage, the upper or lower triangle can be stored in a one-dimensional array of length n(n+1)/2; that is, the storage is almost halved.
This storage format is referred to as packed storage; it is described in Section 3.4.2 in the F07 Chapter Introduction.
Functions designed for packed storage are usually less efficient, especially on high-performance computers, so there is a trade-off between storage and efficiency.

2.10 Band Matrices

A band matrix is one whose elements are confined to a relatively small number of subdiagonals or superdiagonals on either side of the main diagonal. Algorithms can take advantage of bandedness to reduce the amount of work and storage required. The storage scheme for band matrices is described in Section 3.4.4 in the F07 Chapter Introduction.
If the problem is the generalized symmetric definite eigenvalue problem Az=λBz and the matrices A and B are additionally banded, the matrix C as defined in Section 2.8 is, in general, full. We can reduce the problem to a banded standard problem by modifying the definition of C thus:
C =XTAX,   where  X=U-1Q  or ​L-TQ,  
where Q is an orthogonal matrix chosen to ensure that C has bandwidth no greater than that of A.
A further refinement is possible when A and B are banded, which halves the amount of work required to form C. Instead of the standard Cholesky factorization of B as UTU or LLT, we use a split Cholesky factorization B=STS, where
S = ( U11 M21 L22 )  
with U11 upper triangular and L22 lower triangular of order approximately n/2; S has the same bandwidth as B.

2.11 Nonsymmetric Eigenvalue Problems

The nonsymmetric eigenvalue problem is to find the eigenvalues, λ, and corresponding eigenvectors, v0, such that
Av=λv.  
More precisely, a vector v as just defined is called a right eigenvector of A, and a vector u0 satisfying
uTA=λuT(uHA=λuH  when ​u​ is complex)  
is called a left eigenvector of A.
A real matrix A may have complex eigenvalues, occurring as complex conjugate pairs.
This problem can be solved via the Schur factorization of A, defined in the real case as
A =ZTZT,  
where Z is an orthogonal matrix and T is an upper quasi-triangular matrix with 1×1 and 2×2 diagonal blocks, the 2×2 blocks corresponding to complex conjugate pairs of eigenvalues of A. In the complex case, the Schur factorization is
A =ZTZH,  
where Z is unitary and T is a complex upper triangular matrix.
The columns of Z are called the Schur vectors. For each k (1kn), the first k columns of Z form an orthonormal basis for the invariant subspace corresponding to the first k eigenvalues on the diagonal of T. Because this basis is orthonormal, it is preferable in many applications to compute Schur vectors rather than eigenvectors. It is possible to order the Schur factorization so that any desired set of k eigenvalues occupy the k leading positions on the diagonal of T.
The two basic tasks of the nonsymmetric eigenvalue functions are to compute, for a given matrix A, all n values of λ and, if desired, their associated right eigenvectors v and/or left eigenvectors u, and the Schur factorization.
These two basic tasks can be performed in the following stages.
  1. 1.A general matrix A is reduced to upper Hessenberg form H which is zero below the first subdiagonal. The reduction may be written A=QHQT with Q orthogonal if A is real, or A=QHQH with Q unitary if A is complex.
  2. 2.The upper Hessenberg matrix H is reduced to Schur form T, giving the Schur factorization H=STST (for H real) or H=STSH (for H complex). The matrix S (the Schur vectors of H) may optionally be computed as well. Alternatively S may be postmultiplied into the matrix Q determined in stage 1, to give the matrix Z=QS, the Schur vectors of A. The eigenvalues are obtained from the diagonal elements or diagonal blocks of T.
  3. 3.Given the eigenvalues, the eigenvectors may be computed in two different ways. Inverse iteration can be performed on H to compute the eigenvectors of H, and then the eigenvectors can be multiplied by the matrix Q in order to transform them to eigenvectors of A. Alternatively the eigenvectors of T can be computed, and optionally transformed to those of H or A if the matrix S or Z is supplied.
The accuracy with which eigenvalues can be obtained can often be improved by balancing a matrix. This is discussed further in Section 2.14.6 below.

2.12 Generalized Nonsymmetric Eigenvalue Problem

The generalized nonsymmetric eigenvalue problem is to find the eigenvalues, λ, and corresponding eigenvectors, v0, such that
Av=λBv.  
More precisely, a vector v as just defined is called a right eigenvector of the matrix pair (A,B), and a vector u0 satisfying
uTA=λuTB(uHA=λuHB​ when ​u​ is complex)  
is called a left eigenvector of the matrix pair (A,B).
If B is singular then the problem has one or more infinite eigenvalues λ=, corresponding to Bv=0. Note that if A is nonsingular, then the equivalent problem μAv=Bv is perfectly well defined and an infinite eigenvalue corresponds to μ=0. To deal with both finite (including zero) and infinite eigenvalues, the functions in this chapter do not compute λ explicitly, but rather return a pair of numbers (α,β) such that if β0
λ =α/β  
and if α0 and β=0 then λ=. β is always returned as real and non-negative. Of course, computationally an infinite eigenvalue may correspond to a small β rather than an exact zero.
For a given pair (A,B) the set of all the matrices of the form (A-λB) is called a matrix pencil and λ and v are said to be an eigenvalue and eigenvector of the pencil (A-λB). If A and B are both singular and share a common null space then
det(A-λB)0  
so that the pencil (A-λB) is singular for all λ. In other words any λ can be regarded as an eigenvalue. In exact arithmetic a singular pencil will have α=β=0 for some (α,β). Computationally if some pair (α,β) is small then the pencil is singular, or nearly singular, and no reliance can be placed on any of the computed eigenvalues. Singular pencils can also manifest themselves in other ways; see, in particular, Sections 2.3.5.2 and 4.11.1.4 of Anderson et al. (1999) for further details.
The generalized eigenvalue problem can be solved via the generalized Schur factorization of the pair (A,B) defined in the real case as
A =QSZT,  B=QTZT,  
where Q and Z are orthogonal, T is upper triangular with non-negative diagonal elements and S is upper quasi-triangular with 1×1 and 2×2 diagonal blocks, the 2×2 blocks corresponding to complex conjugate pairs of eigenvalues. In the complex case, the generalized Schur factorization is
A =QSZH,  B=QTZH,  
where Q and Z are unitary and S and T are upper triangular, with T having real non-negative diagonal elements. The columns of Q and Z are called respectively the left and right generalized Schur vectors and span pairs of deflating subspaces of A and B, which are a generalization of invariant subspaces.
It is possible to order the generalized Schur factorization so that any desired set of k eigenvalues correspond to the k leading positions on the diagonals of the pair (S,T).
The two basic tasks of the generalized nonsymmetric eigenvalue functions are to compute, for a given pair (A,B), all n values of λ and, if desired, their associated right eigenvectors v and/or left eigenvectors u, and the generalized Schur factorization.
These two basic tasks can be performed in the following stages.
  1. 1.The matrix pair (A,B) is reduced to generalized upper Hessenberg form (H,R), where H is upper Hessenberg (zero below the first subdiagonal) and R is upper triangular. The reduction may be written as A=Q1HZ1T, B=Q1RZ1T in the real case with Q1 and Z1 orthogonal, and A=Q1H Z1H , B=Q1R Z1H in the complex case with Q1 and Z1 unitary.
  2. 2.The generalized upper Hessenberg form (H,R) is reduced to the generalized Schur form (S,T) using the generalized Schur factorization H=Q2S Z2T, R=Q2T Z2T in the real case with Q2 and Z2 orthogonal, and H=Q2 SZ2H, R=Q2T Z2H in the complex case. The generalized Schur vectors of (A,B) are given by Q=Q1Q2, Z=Z1Z2. The eigenvalues are obtained from the diagonal elements (or blocks) of the pair (S,T).
  3. 3.Given the eigenvalues, the eigenvectors of the pair (S,T) can be computed, and optionally transformed to those of (H,R) or (A,B).
The accuracy with which eigenvalues can be obtained can often be improved by balancing a matrix pair. This is discussed further in Section 2.14.8 below.

2.13 The Sylvester Equation and the Generalized Sylvester Equation

The Sylvester equation is a matrix equation of the form
AX+XB=C,  
where A, B, and C are given matrices with A being m×m, B an n×n matrix and C, and the solution matrix X, m×n matrices. The solution of a special case of this equation occurs in the computation of the condition number for an invariant subspace, but a combination of functions in this chapter allows the solution of the general Sylvester equation.
Functions are also provided for solving a special case of the generalized Sylvester equations
AR-LB=C ,  DR-LE=F ,  
where (A,D), (B,E) and (C,F) are given matrix pairs, and R and L are the solution matrices.

2.14 Error and Perturbation Bounds and Condition Numbers

In this section we discuss the effects of rounding errors in the solution process and the effects of uncertainties in the data, on the solution to the problem. A number of the functions in this chapter return information, such as condition numbers, that allow these effects to be assessed. First we discuss some notation used in the error bounds of later sections.
The bounds usually contain the factor p(n) (or p(m,n)), which grows as a function of the matrix dimension n (or matrix dimensions m and n). It measures how errors can grow as a function of the matrix dimension, and represents a potentially different function for each problem. In practice, it usually grows just linearly; p(n)10n is often true, although generally only much weaker bounds can be actually proved. We normally describe p(n) as a ‘modestly growing’ function of n. For detailed derivations of various p(n), see Golub and Van Loan (2012) and Wilkinson (1965).
For linear equation (see Chapter F07) and least squares solvers, we consider bounds on the relative error x-x^/x in the computed solution x^, where x is the true solution. For eigenvalue problems we consider bounds on the error |λi-λ^i| in the ith computed eigenvalue λ^i, where λi is the true ith eigenvalue. For singular value problems we similarly consider bounds |σi-σ^i|.
Bounding the error in computed eigenvectors and singular vectors v^i is more subtle because these vectors are not unique: even though we restrict v^i2=1 and vi2=1, we may still multiply them by arbitrary constants of absolute value 1. So to avoid ambiguity we bound the angular difference between v^i and the true vector vi, so that
θ(vi,v^i) = acute angle between ​vi​ and ​v^i = arccos|viHv^i|. (2)
Here arccos(θ) is in the standard range: 0arccos(θ)<π. When θ(vi,v^i) is small, we can choose a constant α with absolute value 1 so that αvi-v^i2θ(vi,v^i).
In addition to bounds for individual eigenvectors, bounds can be obtained for the spaces spanned by collections of eigenvectors. These may be much more accurately determined than the individual eigenvectors which span them. These spaces are called invariant subspaces in the case of eigenvectors, because if v is any vector in the space, Av is also in the space, where A is the matrix. Again, we will use angle to measure the difference between a computed space S^ and the true space S:
θ(S,S^) = acute angle between ​S​ and ​S^ = max sS s0 min s^S^ s^0 θ(s,s^)   or   max s^S^ s^0 min sS s0 θ(s,s^) (3)
θ(S,S^) may be computed as follows. Let S be a matrix whose columns are orthonormal and spanS. Similarly let S^ be an orthonormal matrix with columns spanning S^. Then
θ(S,S^)=arccosσmin(SHS^).  
Finally, we remark on the accuracy of the bounds when they are large. Relative errors like x^-x/x and angular errors like θ(v^i,vi) are only of interest when they are much less than 1. Some stated bounds are not strictly true when they are close to 1, but rigorous bounds are much more complicated and supply little extra information in the interesting case of small errors. These bounds are indicated by using the symbol , or ‘approximately less than’, instead of the usual . Thus, when these bounds are close to 1 or greater, they indicate that the computed answer may have no significant digits at all, but do not otherwise bound the error.
A number of functions in this chapter return error estimates and/or condition number estimates directly. In other cases Anderson et al. (1999) gives code fragments to illustrate the computation of these estimates, and a number of the Chapter F08 example programs, for the driver functions, implement these code fragments.

2.14.1 Least squares problems

The conventional error analysis of linear least squares problems goes as follows. The problem is to find the x minimizing Ax-b2. Let x^ be the solution computed using one of the methods described above. We discuss the most common case, where A is overdetermined (i.e., has more rows than columns) and has full rank.
Then the computed solution x^ has a small normwise backward error. In other words x^ minimizes (A+E)x^-(b+f)2, where
max( E2 A2 , f2 b2 ) p(n)ε  
and p(n) is a modestly growing function of n and ε is the machine precision. Let κ2(A)=σmax(A)/σmin(A), ρ=Ax-b2, and sin(θ)=ρ/b2. Then if p(n)ε is small enough, the error x^-x is bounded by
x-x^2 x2 p(n)ε {2κ2(A) cos(θ) +tan(θ)κ22(A)} .  
If A is rank-deficient, the problem can be regularized by treating all singular values less than a user-specified threshold as exactly zero. See Golub and Van Loan (2012) for error bounds in this case, as well as for the underdetermined case.
The solution of the overdetermined, full-rank problem may also be characterised as the solution of the linear system of equations
( I A AT 0 ) ( r x )= ( b 0 ) .  
By solving this linear system (see Chapter F07) component-wise error bounds can also be obtained (see Arioli et al. (1989)).

2.14.2 The singular value decomposition

The usual error analysis of the SVD algorithm is as follows (see Golub and Van Loan (2012)).
The computed SVD, U^Σ^V^T, is nearly the exact SVD of A+E, i.e., A+E=(U^+δU^)Σ^(V^+δV^) is the true SVD, so that U^+δU^ and V^+δV^ are both orthogonal, where E2/A2p(m,n)ε, δU^p(m,n)ε, and δV^p(m,n)ε. Here p(m,n) is a modestly growing function of m and n and ε is the machine precision. Each computed singular value σ^i differs from the true σi by an amount satisfying the bound
|σ^i-σi|p(m,n)εσ1.  
Thus large singular values (those near σ1) are computed to high relative accuracy and small ones may not be.
The angular difference between the computed left singular vector u^i and the true ui satisfies the approximate bound
θ(u^i,ui)p(m,n)εA2gapi  
where
gap i = min ji |σi-σj|  
is the absolute gap between σi and the nearest other singular value. Thus, if σi is close to other singular values, its corresponding singular vector ui may be inaccurate. The same bound applies to the computed right singular vector v^i and the true vector vi. The gaps may be easily obtained from the computed singular values.
Let S^ be the space spanned by a collection of computed left singular vectors {u^i,iI}, where I is a subset of the integers from 1 to n. Let S be the corresponding true space. Then
θ(S^,S)p(m,n)εA2 gapI .  
where
gapI=min{|σi-σj|  for ​iI,jI}  
is the absolute gap between the singular values in I and the nearest other singular value. Thus, a cluster of close singular values which is far away from any other singular value may have a well determined space S^ even if its individual singular vectors are ill-conditioned. The same bound applies to a set of right singular vectors {v^i,iI}.
In the special case of bidiagonal matrices, the singular values and singular vectors may be computed much more accurately (see Demmel and Kahan (1990)). A bidiagonal matrix B has nonzero entries only on the main diagonal and the diagonal immediately above it (or immediately below it). Reduction of a dense matrix to bidiagonal form B can introduce additional errors, so the following bounds for the bidiagonal case do not apply to the dense case.
Using the functions in this chapter, each computed singular value of a bidiagonal matrix is accurate to nearly full relative accuracy, no matter how tiny it is, so that
|σ^i-σi|p(m,n)εσi.  
The computed left singular vector u^i has an angular error at most about
θ(u^i,ui)p(m,n)εrelgapi  
where
relgapi= min ji |σi-σj| / (σi+σj)  
is the relative gap between σi and the nearest other singular value. The same bound applies to the right singular vector v^i and vi. Since the relative gap may be much larger than the absolute gap, this error bound may be much smaller than the previous one. The relative gaps may be easily obtained from the computed singular values.

2.14.3 The symmetric eigenproblem

The usual error analysis of the symmetric eigenproblem is as follows (see Parlett (1998)).
The computed eigendecomposition Z^Λ^Z^T is nearly the exact eigendecomposition of A+E, i.e., A+E=(Z^+δZ^)Λ^(Z^+δZ^)T is the true eigendecomposition so that Z^+δZ^ is orthogonal, where E2/A2p(n)ε and δZ^2p(n)ε and p(n) is a modestly growing function of n and ε is the machine precision. Each computed eigenvalue λ^i differs from the true λi by an amount satisfying the bound
|λ^i-λi|p(n)εA2.  
Thus large eigenvalues (those near max i |λi| = A2 ) are computed to high relative accuracy and small ones may not be.
The angular difference between the computed unit eigenvector z^i and the true zi satisfies the approximate bound
θ(z^i,zi)p(n)εA2gapi  
if p(n)ε is small enough, where
gapi= min ji |λi-λj|  
is the absolute gap between λi and the nearest other eigenvalue. Thus, if λi is close to other eigenvalues, its corresponding eigenvector zi may be inaccurate. The gaps may be easily obtained from the computed eigenvalues.
Let S^ be the invariant subspace spanned by a collection of eigenvectors {z^i,iI}, where I is a subset of the integers from 1 to n. Let S be the corresponding true subspace. Then
θ(S^,S)p(n)εA2 gapI  
where
gapI=min{|λi-λj|  for ​iI,jI}  
is the absolute gap between the eigenvalues in I and the nearest other eigenvalue. Thus, a cluster of close eigenvalues which is far away from any other eigenvalue may have a well determined invariant subspace S^ even if its individual eigenvectors are ill-conditioned.
In the special case of a real symmetric tridiagonal matrix T, functions in this chapter can compute the eigenvalues and eigenvectors much more accurately. See Anderson et al. (1999) for further details.

2.14.4 The generalized symmetric-definite eigenproblem

The three types of problem to be considered are A-λB, AB-λI and BA-λI. In each case A and B are real symmetric (or complex Hermitian) and B is positive definite. We consider each case in turn, assuming that functions in this chapter are used to transform the generalized problem to the standard symmetric problem, followed by the solution of the symmetric problem. In all cases
gapi= min ji |λi-λj|  
is the absolute gap between λi and the nearest other eigenvalue.
  1. 1.A-λB. The computed eigenvalues λ^i can differ from the true eigenvalues λi by an amount
    |λ^i-λi|p(n)εB-12A2.  
    The angular difference between the computed eigenvector z^i and the true eigenvector zi is
    θ (z^i,zi) p(n) ε B-12 A2 (κ2(B)) 1/2 gapi .  
  2. 2.AB-λI or BA-λI. The computed eigenvalues λ^i can differ from the true eigenvalues λi by an amount
    |λ^i-λi|p(n)εB2A2.  
    The angular difference between the computed eigenvector z^i and the true eigenvector zi is
    θ (z^i,zi) p(n) ε B2 A2 (κ2(B)) 1/2 gapi .  
These error bounds are large when B is ill-conditioned with respect to inversion (κ2(B) is large). It is often the case that the eigenvalues and eigenvectors are much better conditioned than indicated here. One way to get tighter bounds is effective when the diagonal entries of B differ widely in magnitude, as for example with a graded matrix.
  1. 1.A-λB. Let D = diag( b11-1/2 ,, b nn -1/2 ) be a diagonal matrix. Then replace B by DBD and A by DAD in the above bounds.
  2. 2.AB-λI or BA-λI. Let D=diag(b11-1/2,,bnn -1/2) be a diagonal matrix. Then replace B by DBD and A by D-1AD-1 in the above bounds.
Further details can be found in Anderson et al. (1999).

2.14.5 The nonsymmetric eigenproblem

The nonsymmetric eigenvalue problem is more complicated than the symmetric eigenvalue problem. In this section, we just summarise the bounds. Further details can be found in Anderson et al. (1999).
We let λ^i be the ith computed eigenvalue and λi the ith true eigenvalue. Let v^i be the corresponding computed right eigenvector, and vi the true right eigenvector (so Avi=λi vi). If I is a subset of the integers from 1 to n, we let λI denote the average of the selected eigenvalues: λI=(iIλi)/ (iI1), and similarly for λ^I. We also let SI denote the subspace spanned by {vi,iI}; it is called a right invariant subspace because if v is any vector in SI then Av is also in SI. S^I is the corresponding computed subspace.
The algorithms for the nonsymmetric eigenproblem are normwise backward stable: they compute the exact eigenvalues, eigenvectors and invariant subspaces of slightly perturbed matrices (A+E) , where E p (n) ε A . Some of the bounds are stated in terms of E2 and others in terms of EF; one may use p(n)ε for either quantity.
Functions are provided so that, for each (λ^i,v^i) pair the two values si and sepi, or for a selected subset I of eigenvalues the values sI and sepI can be obtained, for which the error bounds in Table 1 are true for sufficiently small E, (which is why they are called asymptotic):
Table 2
Asymptotic error bounds for the nonsymmetric eigenproblem
Simple eigenvalue |λ^i-λi|E2/si
Eigenvalue cluster |λ^I-λI|E2/sI
Eigenvector θ(v^i,vi)EF/sepi
Invariant subspace θ(S^I,SI)EF/sepI
If the problem is ill-conditioned, the asymptotic bounds may only hold for extremely small E. The global error bounds of Table 1 are guaranteed to hold for all EF<s×sep/4:
Table 3
Global error bounds for the nonsymmetric eigenproblem
Simple eigenvalue |λ^i-λi|nE2/si Holds for all E
Eigenvalue cluster |λ^I-λI|2E2/sI Requires EF<sI×sepI/4
Eigenvector θ(v^i,vi)arctan(2EF/(sepi-4EF/si)) Requires EF<si×sepi/4
Invariant subspace θ(S^I,SI)arctan(2EF/(sepI-4EF/sI)) Requires EF<sI×sepI/4

2.14.6 Balancing and condition for the nonsymmetric eigenproblem

There are two preprocessing steps one may perform on a matrix A in order to make its eigenproblem easier. The first is permutation, or reordering the rows and columns to make A more nearly upper triangular (closer to Schur form): A=PAPT, where P is a permutation matrix. If A is permutable to upper triangular form (or close to it), then no floating-point operations (or very few) are needed to reduce it to Schur form. The second is scaling by a diagonal matrix D to make the rows and columns of A more nearly equal in norm: A=DAD-1. Scaling can make the matrix norm smaller with respect to the eigenvalues, and so possibly reduce the inaccuracy contributed by roundoff (see Chapter 11 of Wilkinson and Reinsch (1971)). We refer to these two operations as balancing.
Permuting has no effect on the condition numbers or their interpretation as described previously. Scaling, however, does change their interpretation and further details can be found in Anderson et al. (1999).

2.14.7 The generalized nonsymmetric eigenvalue problem

The algorithms for the generalized nonsymmetric eigenvalue problem are normwise backward stable: they compute the exact eigenvalues (as the pairs (α,β)), eigenvectors and deflating subspaces of slightly perturbed pairs (A+E,B+F), where
(E,F)Fp(n)ε(A,B)F.  
Asymptotic and global error bounds can be obtained, which are generalizations of those given in Tables 1 and 1. See Section 4.11 of Anderson et al. (1999) for details. Functions are provided to compute estimates of reciprocal conditions numbers for eigenvalues and eigenspaces.

2.14.8 Balancing the generalized eigenvalue problem

As with the standard nonsymmetric eigenvalue problem, there are two preprocessing steps one may perform on a matrix pair (A,B) in order to make its eigenproblem easier; permutation and scaling, which together are referred to as balancing, as indicated in the following two steps.
  1. 1.The balancing function first attempts to permute A and B to block upper triangular form by a similarity transformation:
    PAPT=F= ( F11 F12 F13 F22 F23 F33 ), PBPT=G= ( G11 G12 G13 G22 G23 G33 ),  
    where P is a permutation matrix, F11, F33, G11 and G33 are upper triangular. Then the diagonal elements of the matrix (F11,G11) and (G33,H33) are generalized eigenvalues of (A,B). The rest of the generalized eigenvalues are given by the matrix pair (F22,G22). Subsequent operations to compute the eigenvalues of (A,B) need only be applied to the matrix (F22,G22); this can save a significant amount of work if (F22,G22) is smaller than the original matrix pair (A,B). If no suitable permutation exists (as is often the case), then there is no gain in efficiency or accuracy.
  2. 2.The balancing function applies a diagonal similarity transformation to (F,G), to make the rows and columns of (F22,G22) as close as possible in the norm:
    DFD-1= ( I D22 I ) ( F11 F12 F13 F22 F23 F33 ) ( I D22-1 I ), DGD-1= ( I D22 I ) ( G11 G12 G13 G22 G23 G33 ) ( I D22-1 I ) .  
    This transformation usually improves the accuracy of computed generalized eigenvalues and eigenvectors. However, there are exceptional occasions when this transformation increases the norm of the pencil; in this case accuracy could be lower with diagonal balancing.
    See Anderson et al. (1999) for further details.

2.14.9 Other problems

Error bounds for other problems such as the generalized linear least squares problem and generalized singular value decomposition can be found in Anderson et al. (1999).

2.15 Block Partitioned Algorithms

A number of the functions in this chapter use what is termed a block partitioned algorithm. This means that at each major step of the algorithm a block of rows or columns is updated, and much of the computation is performed by matrix-matrix operations on these blocks. These matrix-matrix operations make efficient use of computer memory and are key to achieving high performance. See Golub and Van Loan (2012) or Anderson et al. (1999) for more about block partitioned algorithms.
The performance of a block partitioned algorithm varies to some extent with the block size – that is, the number of rows or columns per block. This is a machine-dependent constant, which is set to a suitable value when the Library is implemented on each range of machines.

3 Recommendations on Choice and Use of Available Functions

3.1 Available Functions

The tables in the following sub-sections show the functions which are provided for performing different computations on different types of matrices. Each entry in the table gives the NAG function short name.
Black Box (or driver) functions are provided for the solution of most problems. In a number of cases there are simple drivers, which just return the solution to the problem, as well as expert drivers, which return additional information, such as condition number estimates, and may offer additional facilities such as balancing. The following sub-sections give tables for the driver functions.

3.1.1 Driver functions

3.1.1.1 Linear least squares problems (LLS)
Operation real complex
solve LLS using QR or LQ factorization
solve LLS using complete orthogonal factorization
solve LLS using SVD
solve LLS using divide-and-conquer SVD
f08aac
f08bac
f08kac
f08kcc
f08anc
f08bnc
f08knc
f08kqc
3.1.1.2 Generalized linear least squares problems (LSE and GLM)
Operation real complex
solve LSE problem using GRQ
solve GLM problem using GQR
f08zac
f08zbc
f08znc
f08zpc
3.1.1.3 Symmetric eigenvalue problems (SEP)
Function and storage scheme real complex
simple driver
divide-and-conquer driver
expert driver
RRR driver
f08fac
f08fcc
f08fbc
f08fdc
f08fnc
f08fqc
f08fpc
f08frc
packed storage
simple driver
divide-and-conquer driver
expert driver

f08gac
f08gcc
f08gbc

f08gnc
f08gqc
f08gpc
band matrix
simple driver
divide-and-conquer driver
expert driver

f08hac
f08hcc
f08hbc

f08hnc
f08hqc
f08hpc
tridiagonal matrix
simple driver
divide-and-conquer driver
expert driver
RRR driver

f08jac
f08jcc
f08jbc
f08jdc
3.1.1.4 Nonsymmetric eigenvalue problem (NEP)
Function and storage scheme real complex
simple driver for Schur factorization
expert driver for Schur factorization
simple driver for eigenvalues/vectors
expert driver for eigenvalues/vectors
f08pac
f08pbc
f08nac
f08nbc
f08pnc
f08ppc
f08nnc
f08npc
3.1.1.5 Singular value decomposition (SVD)
Function and storage scheme real complex
simple driver
divide-and-conquer driver
expert driver
simple driver for one-sided Jacobi SVD
expert driver for one-sided Jacobi SVD
f08kbc
f08kdc
f08kmc
f08kjc
f08khc
f08kpc
f08krc
f08kzc
f08kwc
f08kvc
3.1.1.6 Generalized symmetric definite eigenvalue problems (GSEP)
Function and storage scheme real complex
simple driver
divide-and-conquer driver
expert driver
f08sac
f08scc
f08sbc
f08snc
f08sqc
f08spc
packed storage
simple driver
divide-and-conquer driver
expert driver

f08tac
f08tcc
f08tbc

f08tnc
f08tqc
f08tpc
band matrix
simple driver
divide-and-conquer driver
expert driver

f08uac
f08ucc
f08ubc

f08unc
f08uqc
f08upc
3.1.1.7 Generalized nonsymmetric eigenvalue problem (GNEP)
Function and storage scheme real complex
simple driver for Schur factorization
expert driver for Schur factorization
simple driver for eigenvalues/vectors
expert driver for eigenvalues/vectors
f08xcc
f08xbc
f08wcc
f08wbc
f08xqc
f08xpc
f08wqc
f08wpc
3.1.1.8 Generalized singular value decomposition (GSVD)
Function and storage scheme real complex
singular values/vectors f08vcc f08vqc

3.1.2 Computational functions

It is possible to solve problems by calling two or more functions in sequence. Some common sequences of functions are indicated in the tables in the following sub-sections; an asterisk (*) against a function name means that the sequence of calls is illustrated in the example program for that function.
3.1.2.1 Orthogonal factorizations
Functions are provided for QR factorization (with and without column pivoting), and for LQ, QL and RQ factorizations (without pivoting only), of a general real or complex rectangular matrix. A function is also provided for the RQ factorization of a real or complex upper trapezoidal matrix. (LAPACK refers to this as the RZ factorization.)
The factorization functions do not form the matrix Q explicitly, but represent it as a product of elementary reflectors (see Section 3.4.6). Additional functions are provided to generate all or part of Q explicitly if it is required, or to apply Q in its factored form to another matrix (specifically to compute one of the matrix products QC, QTC, CQ or CQT with QT replaced by QH if C and Q are complex).
Factorize
without
pivoting
Factorize
with
pivoting
Factorize
(blocked)
Generate
matrix Q
Apply
matrix Q
Apply
Q (blocked)
QR factorization,
real matrices
f08aec f08bfc f08abc f08afc f08agc f08acc
QR factorization,
real triangular-pentagonal
f08bbc f08bcc
LQ factorization,
real matrices
f08ahc f08ajc f08akc
QL factorization,
real matrices
f08cec f08cfc f08cgc
RQ factorization,
real matrices
f08chc f08cjc f08ckc
RQ factorization,
real upper trapezoidal matrices
f08bhc f08bkc
QR factorization,
complex matrices
f08asc f08btc f08apc f08atc f08auc f08aqc
QR factorization,
complex triangular-pentagonal
f08bpc f08bqc
LQ factorization,
complex matrices
f08avc f08awc f08axc
QL factorization,
complex matrices
f08csc f08ctc f08cuc
RQ factorization,
complex matrices
f08cvc f08cwc f08cxc
RQ factorization,
complex upper trapezoidal matrices
f08bvc f08bxc
To solve linear least squares problems, as described in Sections 2.2.1 or 2.2.3, functions based on the QR factorization can be used:
real data, full-rank problem f08aac, f08aec and f08agc, f08abc and f08acc, f16yjc
complex data, full-rank problem f08anc, f08asc and f08auc, f08apc and f08aqc, f16zjc
real data, rank-deficient problem f08bfc*, f16yjc, f08agc
complex data, rank-deficient problem f08btc*, f16zjc, f08auc
To find the minimum norm solution of underdetermined systems of linear equations, as described in Section 2.2.2, functions based on the LQ factorization can be used:
real data, full-rank problem f08ahc*, f16yjc, f08akc
complex data, full-rank problem f08avc*, f16zjc, f08axc
3.1.2.2 Generalized orthogonal factorizations
Functions are provided for the generalized QR and RQ factorizations of real and complex matrix pairs.
Factorize
Generalized QR factorization, real matrices f08zec
Generalized RQ factorization, real matrices f08zfc
Generalized QR factorization, complex matrices f08zsc
Generalized RQ factorization, complex matrices f08ztc
3.1.2.3 Singular value problems
Functions are provided to reduce a general real or complex rectangular matrix A to real bidiagonal form B by an orthogonal transformation A=QBPT (or by a unitary transformation A=QBPH if A is complex). Different functions allow a full matrix A to be stored conventionally (see Section 3.4.1), or a band matrix to use band storage (see Section 3.4.4 in the F07 Chapter Introduction).
The functions for reducing full matrices do not form the matrix Q or P explicitly; additional functions are provided to generate all or part of them, or to apply them to another matrix, as with the functions for orthogonal factorizations. Explicit generation of Q or P is required before using the bidiagonal QR algorithm to compute left or right singular vectors of A.
The functions for reducing band matrices have options to generate Q or P if required.
Further functions are provided to compute all or part of the singular value decomposition of a real bidiagonal matrix; the same functions can be used to compute the singular value decomposition of a real or complex matrix that has been reduced to bidiagonal form.
real complex
Reduce to bidiagonal form f08kec f08ksc
Generate matrix Q or PT f08kfc f08ktc
Apply matrix Q or P f08kgc f08kuc
Reduce band matrix to bidiagonal form f08lec f08lsc
SVD of bidiagonal form (QR algorithm) f08mec f08msc
SVD of bidiagonal form (divide and conquer) f08mdc
SVD of bidiagonal form (tridiagonal eigenproblem) f08mbc
Where mn, the first stage should be preceeded by a QR factorization with the remaining stages operating on the resultant R matrix (see Section 3.1.2.1). The left singular vectors obtained must then be premultiplied by Q to obtain the left singular vectors of the original matrix. Similarly, if mn, then an initial LQ factorization and a final post-multiplication by Q on the right singular vectors should be performed, with the above listed stages operating on the matrix L.
Given the singular values, f08flc is provided to compute the reciprocal condition numbers for the left or right singular vectors of a real or complex matrix.
To compute the singular values and vectors of a rectangular matrix, as described in Section 2.3, use the following sequence of calls:
Rectangular matrix (standard storage)
real matrix, singular values and vectors f08kec, f08kfc*, f08mec
complex matrix, singular values and vectors f08ksc, f08ktc*, f08msc
Rectangular matrix (banded)
real matrix, singular values and vectors f08lec, f08kfc, f08mec
complex matrix, singular values and vectors f08lsc, f08ktc, f08msc
To use the singular value decomposition to solve a linear least squares problem, as described in Section 2.4, the following functions are required:
real data f16yac, f08kec, f08kfc, f08kgc, f08mec
complex data f16zac, f08ksc, f08ktc, f08kuc, f08msc
3.1.2.4 Generalized singular value decomposition
Functions are provided to compute the generalized SVD of a real or complex matrix pair (A,B) in upper trapezoidal form. Functions are also provided to reduce a general real or complex matrix pair to the required upper trapezoidal form.
Reduce to
trapezoidal form
Generalized SVD
of trapezoidal form
real matrices f08vgc f08yec
complex matrices f08vuc f08ysc
Functions are provided for the full CS decomposition of orthogonal and unitary matrices expressed as 2×2 partitions of submatrices. For real orthogonal matrices the CS decomposition is performed by f08rac, while for unitary matrices the equivalent function is f08rnc.
3.1.2.5 Symmetric eigenvalue problems
Functions are provided to reduce a real symmetric or complex Hermitian matrix A to real tridiagonal form T by an orthogonal similarity transformation A=QTQT (or by a unitary transformation A=QTQH if A is complex). Different functions allow a full matrix A to be stored conventionally (see Section 3.4.1 in the F07 Chapter Introduction) or in packed storage (see Section 3.4.2 in the F07 Chapter Introduction); or a band matrix to use band storage (see Section 3.4.4 in the F07 Chapter Introduction).
The functions for reducing full matrices do not form the matrix Q explicitly; additional functions are provided to generate Q, or to apply it to another matrix, as with the functions for orthogonal factorizations. Explicit generation of Q is required before using the QR algorithm to find all the eigenvectors of A; application of Q to another matrix is required after eigenvectors of T have been found by inverse iteration, in order to transform them to eigenvectors of A.
The functions for reducing band matrices have an option to generate Q if required.
Reduce to
tridiagonal
form
Generate
matrix Q
Apply
matrix Q
real symmetric matrices f08fec f08ffc f08fgc
real symmetric matrices (packed storage) f08gec f08gfc f08ggc
real symmetric band matrices f08hec
complex Hermitian matrices f08fsc f08ftc f08fuc
complex Hermitian matrices (packed storage) f08gsc f08gtc f08guc
complex Hermitian band matrices f08hsc
Given the eigenvalues, f08flc is provided to compute the reciprocal condition numbers for the eigenvectors of a real symmetric or complex Hermitian matrix.
A variety of functions are provided to compute eigenvalues and eigenvectors of the real symmetric tridiagonal matrix T, some computing all eigenvalues and eigenvectors, some computing selected eigenvalues and eigenvectors. The same functions can be used to compute eigenvalues and eigenvectors of a real symmetric or complex Hermitian matrix which has been reduced to tridiagonal form.
Eigenvalues and eigenvectors of real symmetric tridiagonal matrices:
The original (non-reduced) matrix is Real Symmetric or Complex Hermitian
all eigenvalues (root-free QR algorithm) f08jfc
all eigenvalues (root-free QR algorithm called by divide-and-conquer) f08jcc or f08jhc
selected eigenvalues (bisection) f08jjc
selected eigenvalues (RRR) f08jlc
The original (non-reduced) matrix is Real Symmetric
all eigenvalues and eigenvectors (QR algorithm) f08jec
all eigenvalues and eigenvectors (divide-and-conquer) f08jcc or f08jhc
all eigenvalues and eigenvectors (positive definite case) f08jgc
selected eigenvectors (inverse iteration) f08jkc
selected eigenvalues and eigenvectors (RRR) f08jlc
The original (non-reduced) matrix is Complex Hermitian
all eigenvalues and eigenvectors (QR algorithm) f08jsc
all eigenvalues and eigenvectors (divide and conquer) f08jvc
all eigenvalues and eigenvectors (positive definite case) f08juc
selected eigenvectors (inverse iteration) f08jxc
selected eigenvalues and eigenvectors (RRR) f08jyc
The following sequences of calls may be used to compute various combinations of eigenvalues and eigenvectors, as described in Section 2.7.
Sequences for computing eigenvalues and eigenvectors
Real Symmetric matrix (standard storage)
all eigenvalues and eigenvectors (using divide-and-conquer) f08fcc
all eigenvalues and eigenvectors (using QR algorithm) f08fec, f08ffc*, f08jec
selected eigenvalues and eigenvectors (bisection and inverse iteration) f08fec, f08fgc, f08jjc, f08jkc*
selected eigenvalues and eigenvectors (RRR) f08fec, f08fgc, f08jlc
Real Symmetric matrix (packed storage)
all eigenvalues and eigenvectors (using divide-and-conquer) f08gcc
all eigenvalues and eigenvectors (using QR algorithm) f08gec, f08gfc and f08jec
selected eigenvalues and eigenvectors (bisection and inverse iteration) f08gec, f08ggc, f08jjc, f08jkc*
selected eigenvalues and eigenvectors (RRR) f08gec, f08ggc, f08jlc
Real Symmetric banded matrix
all eigenvalues and eigenvectors (using divide-and-conquer) f08hcc
all eigenvalues and eigenvectors (using QR algorithm) f08hec*, f08jec
Complex Hermitian matrix (standard storage)
all eigenvalues and eigenvectors (using divide-and-conquer) f08fqc
all eigenvalues and eigenvectors (using QR algorithm) f08fsc, f08ftc*, f08jsc
selected eigenvalues and eigenvectors (bisection and inverse iteration) f08fsc, f08fuc, f08jjc, f08jxc*
selected eigenvalues and eigenvectors (RRR) f08fsc, f08fuc, f08jyc
Complex Hermitian matrix (packed storage)
all eigenvalues and eigenvectors (using divide-and-conquer) f08gqc
all eigenvalues and eigenvectors (using QR algorithm) f08gsc, f08gtc*, f08jsc
selected eigenvalues and eigenvectors (bisection and inverse iteration) f08gsc, f08guc, f08jjc, f08jxc*
selected eigenvalues and eigenvectors (RRR) f08gsc, f08guc and f08jyc
Complex Hermitian banded matrix
all eigenvalues and eigenvectors (using divide-and-conquer) f08hqc
all eigenvalues and eigenvectors (using QR algorithm) f08hsc*, f08jsc
3.1.2.6 Generalized symmetric-definite eigenvalue problems
Functions are provided for reducing each of the problems Ax=λBx, ABx=λx or BAx=λx to an equivalent standard eigenvalue problem Cy=λy. Different functions allow the matrices to be stored either conventionally or in packed storage. The positive definite matrix B must first be factorized using a function from Chapter F07. There is also a function which reduces the problem Ax=λBx where A and B are banded, to an equivalent banded standard eigenvalue problem; this uses a split Cholesky factorization for which a function in Chapter F08 is provided.
Reduce to
standard problem
Reduce to
standard problem
(packed storage)
Reduce to
standard problem
(band matrices)
real symmetric matrices f08sec f08tec f08uec
complex Hermitian matrices f08ssc f08tsc f08usc
The equivalent standard problem can then be solved using the functions discussed in Section 3.1.2.5. For example, to compute all the eigenvalues, the following functions must be called:
real symmetric-definite problem f07fdc, f08sec*, f08fec, f08jfc
real symmetric-definite problem, packed storage f07gdc, f08tec*, f08gec, f08jfc
real symmetric-definite banded problem f08ufc*, f08uec*, f08hec, f08jfc
complex Hermitian-definite problem f07frc, f08ssc*, f08fsc, f08jfc
complex Hermitian-definite problem, packed storage f07grc, f08tsc*, f08gsc, f08jfc
complex Hermitian-definite banded problem f08utc*, f08usc*, f08hsc, f08jfc
If eigenvectors are computed, the eigenvectors of the equivalent standard problem must be transformed back to those of the original generalized problem, as indicated in Section 2.8; functions from Chapter F16 may be used for this.
3.1.2.7 Nonsymmetric eigenvalue problems
Functions are provided to reduce a general real or complex matrix A to upper Hessenberg form H by an orthogonal similarity transformation A=QHQT (or by a unitary transformation A=QHQH if A is complex).
These functions do not form the matrix Q explicitly; additional functions are provided to generate Q, or to apply it to another matrix, as with the functions for orthogonal factorizations. Explicit generation of Q is required before using the QR algorithm on H to compute the Schur vectors; application of Q to another matrix is needed after eigenvectors of H have been computed by inverse iteration, in order to transform them to eigenvectors of A.
Functions are also provided to balance the matrix before reducing it to Hessenberg form, as described in Section 2.14.6. Companion functions are required to transform Schur vectors or eigenvectors of the balanced matrix to those of the original matrix.
Reduce to
Hessenberg
form
Generate
matrix Q
Apply
matrix Q
Balance Back­transform
vectors after
balancing
real matrices f08nec f08nfc f08ngc f08nhc f08njc
complex matrices f08nsc f08ntc f08nuc f08nvc f08nwc
Functions are provided to compute the eigenvalues and all or part of the Schur factorization of an upper Hessenberg matrix. Eigenvectors may be computed either from the upper Hessenberg form by inverse iteration, or from the Schur form by back-substitution; these approaches are equally satisfactory for computing individual eigenvectors, but the latter may provide a more accurate basis for a subspace spanned by several eigenvectors.
Additional functions estimate the sensitivities of computed eigenvalues and eigenvectors, as discussed in Section 2.14.5.
Eigenvalues and
Schur factorization
(QR algorithm)
Eigenvectors from
Hessenberg form
(inverse iteration)
Eigenvectors from
Schur factorization
Sensitivities of
eigenvalues and
eigenvectors
real matrices f08pec f08pkc f08qkc f08qlc
complex matrices f08psc f08pxc f08qxc f08qyc
Finally functions are provided for reordering the Schur factorization, so that eigenvalues appear in any desired order on the diagonal of the Schur form. The functions f08qfc and f08qtc simply swap two diagonal elements or blocks, and may need to be called repeatedly to achieve a desired order. The functions f08qgc and f08quc perform the whole reordering process for the important special case where a specified cluster of eigenvalues is to appear at the top of the Schur form; if the Schur vectors are reordered at the same time, they yield an orthonormal basis for the invariant subspace corresponding to the specified cluster of eigenvalues. These functions can also compute the sensitivities of the cluster of eigenvalues and the invariant subspace.
Reorder
Schur factorization
Reorder
Schur factorization,
find basis for invariant
subspace and estimate
sensitivities
real matrices f08qfc f08qgc
complex matrices f08qtc f08quc
The following sequences of calls may be used to compute various combinations of eigenvalues, Schur vectors and eigenvectors, as described in Section 2.11:
real matrix, all eigenvalues and Schur factorization f08nec, f08nfc*, f08pec
real matrix, all eigenvalues and selected eigenvectors f08nec, f08ngc, f08pec, f08pkc
real matrix, all eigenvalues and eigenvectors (with balancing) f08nhc*, f08nec, f08nfc, f08njc, f08pec, f08pkc
complex matrix, all eigenvalues and Schur factorization f08nsc, f08ntc*, f08psc
complex matrix, all eigenvalues and selected eigenvectors f08nsc, f08nuc, f08psc, f08pxc*
complex matrix, all eigenvalues and eigenvectors (with balancing) f08nvc*, f08nsc, f08ntc, f08nwc, f08psc, f08pxc
3.1.2.8 Generalized nonsymmetric eigenvalue problems
Functions are provided to reduce a real or complex matrix pair (A1,R1), where A1 is general and R1 is upper triangular, to generalized upper Hessenberg form by orthogonal transformations A1=Q1HZ1T, R1=Q1RZ1T, (or by unitary transformations A1=Q1HZ1H, R=Q1R1Z1H, in the complex case). These functions can optionally return Q1 and/or Z1. Note that to transform a general matrix pair (A,B) to the form (A1,R1) a QR factorization of B (B=Q~R1) should first be performed and the matrix A1 obtained as A1=Q~TA (see Section 3.1.2.1 above).
Functions are also provided to balance a general matrix pair before reducing it to generalized Hessenberg form, as described in Section 2.14.8. Companion functions are provided to transform vectors of the balanced pair to those of the original matrix pair.
Reduce to
generalized
Hessenberg form
Balance Backtransform
vectors after
balancing
real matrices f08wfc f08whc f08wjc
complex matrices f08wtc f08wvc f08wwc
Functions are provided to compute the eigenvalues (as the pairs (α,β)) and all or part of the generalized Schur factorization of a generalized upper Hessenberg matrix pair. Eigenvectors may be computed from the generalized Schur form by back-substitution.
Additional functions estimate the sensitivities of computed eigenvalues and eigenvectors.
Eigenvalues and
generalized Schur
factorization
(QZ algorithm)
Eigenvectors from
generalized Schur
factorization
Sensitivities of
eigenvalues and
eigenvectors
real matrices f08xec f08ykc f08ylc
complex matrices f08xsc f08yxc f08yyc
Finally, functions are provided for reordering the generalized Schur factorization so that eigenvalues appear in any desired order on the diagonal of the generalized Schur form. f08yfc and f08ytc simply swap two diagonal elements or blocks, and may need to be called repeatedly to achieve a desired order. f08ygc and f08yuc perform the whole reordering process for the important special case where a specified cluster of eigenvalues is to appear at the top of the generalized Schur form; if the Schur vectors are reordered at the same time, they yield an orthonormal basis for the deflating subspace corresponding to the specified cluster of eigenvalues. These functions can also compute the sensitivities of the cluster of eigenvalues and the deflating subspace.
Reorder generalized Schur
factorization
Reorder generalized Schur
factorization, find basis for
deflating subspace and
estimate sensitivites
real matrices f08yfc f08ygc
complex matrices f08ytc f08yuc
The following sequences of calls may be used to compute various combinations of eigenvalues, generalized Schur vectors and eigenvectors
real matrix pair, all eigenvalues (with balancing) f08aec, f08agc (or f08abc, f08acc), f08wfc, f08whc, f08xec*
real matrix pair, all eigenvalues and generalized Schur factorization f08aec, f08afc, f08agc (or f08abc, f08acc), f08wfc, f08xec
real matrix pair, all eigenvalues and eigenvectors (with balancing) f16qfc, f16qhc, f08aec, f08afc, f08agc (or f08abc, f08acc), f08wfc, f08whc, f08xec, f08ykc*, f08wjc
complex matrix pair, all eigenvalues (with balancing) f08asc, f08auc (or f08apc, f08aqc), f08wtc, f08wvc, f08xsc*
complex matrix pair, all eigenvalues and generalized Schur factorization f08asc, f08atc, f08auc (or f08apc, f08aqc), f08wtc, f08xsc
complex matrix pair, all eigenvalues and eigenvectors (with balancing) f16tfc, f16thc, f08asc, f08atc, f08auc (or f08apc, f08aqc), f08wtc, f08wvc, f08xsc, f08yxc*, f08wwc
3.1.2.9 The Sylvester equation and the generalized Sylvester equation
Functions are provided to solve the real or complex Sylvester equation AX±XB=C, where A and B are upper quasi-triangular if real, or upper triangular if complex. To solve the general form of the Sylvester equation in which A and B are general square matrices, A and B must be reduced to upper (quasi-) triangular form by the Schur factorization, using functions described in Section 3.1.2.7. For more details, see the documents for the functions listed below.
Solve the Sylvester equation
real matrices f08qhc
complex matrices f08qvc
Functions are also provided to solve the real or complex generalized Sylvester equations
AR-LB=C ,   ​ DR-LE=F ,  
where the pairs (A,D) and (B,E) are in generalized Schur form. To solve the general form of the generalized Sylvester equation in which (A,D) and (B,E) are general matrix pairs, (A,D) and (B,E) must first be reduced to generalized Schur form.
Solve the generalized Sylvester equation
real matrices f08yhc
complex matrices f08yvc

3.2 NAG Names and LAPACK Names

The functions may be called either by their NAG short names or by their NAG long names which contain their double precision LAPACK names.
References to Chapter F08 functions in the manual normally include the LAPACK double precision names, for example f08aec. The LAPACK routine names follow a simple scheme. Each name has the structure xyyzzz, where the components have the following meanings:
Thus the function nag_lapackeig_dgeqrf performs a QR factorization of a real general matrix; the corresponding function for a complex general matrix is nag_lapackeig_zgeqrf.

3.3 Matrix Storage Schemes

In this chapter the following storage schemes are used for matrices:
These storage schemes are compatible with those used in Chapters F07 and F16, but different schemes for packed, band and tridiagonal storage are used in a few older functions in Chapters F01, F02, F03 and F04.

3.3.1 Conventional storage

Please see Section 3.4.1 in the F07 Chapter Introduction for full details.

3.3.2 Packed storage

Please see Section 3.4.2 in the F07 Chapter Introduction for full details.

3.3.3 Band storage

Please see Section 3.4.4 in the F07 Chapter Introduction for full details.

3.3.4 Tridiagonal and bidiagonal matrices

A symmetric tridiagonal or bidiagonal matrix is stored in two one-dimensional arrays, one of length n containing the diagonal elements, and one of length n-1 containing the off-diagonal elements. (Older functions in Chapter F02 store the off-diagonal elements in elements 2:n of a vector of length n.)

3.3.5 Real diagonal elements of complex matrices

Please see Section 3.4.6 in the F07 Chapter Introduction for full details.

3.3.6 Representation of orthogonal or unitary matrices

A real orthogonal or complex unitary matrix (usually denoted Q) is often represented in the NAG Library as a product of elementary reflectors – also referred to as elementary Householder matrices (usually denoted Hi). For example,
Q =H1H2Hk.  
You need not be aware of the details, because functions are provided to work with this representation, either to generate all or part of Q explicitly, or to multiply a given matrix by Q or QT (QH in the complex case) without forming Q explicitly.
Nevertheless, the following further details may occasionally be useful.
An elementary reflector (or elementary Householder matrix) H of order n is a unitary matrix of the form
H=I-τvvH (4)
where τ is a scalar, and v is an n-element vector, with |τ|2v22=2×Re(τ); v is often referred to as the Householder vector. Often v has several leading or trailing zero elements, but for the purpose of this discussion assume that H has no such special structure.
There is some redundancy in the representation (4), which can be removed in various ways. The representation used in Chapter F08 and in LAPACK (which differs from those used in some of the functions in Chapters F01, F02 and F04) sets v1=1; hence v1 need not be stored. In real arithmetic, 1τ2, except that τ=0 implies H=I.
In complex arithmetic, τ may be complex, and satisfies 1Re(τ)2 and |τ-1|1. Thus a complex H is not Hermitian (as it is in other representations), but it is unitary, which is the important property. The advantage of allowing τ to be complex is that, given an arbitrary complex vector x,H can be computed so that
HHx=β(1,0,,0)T  
with real β. This is useful, for example, when reducing a complex Hermitian matrix to real symmetric tridiagonal form, or a complex rectangular matrix to real bidiagonal form.

3.4 Argument Conventions

3.4.1 Option Arguments

In addition to the order argument of type Nag_OrderType, most functions in this Chapter have one or more option arguments of various types; only options of the correct type may be supplied.
For example,
nag_lapackeig_dsytrd(Nag_RowMajor,Nag_Upper,...)

3.4.2 Problem dimensions

It is permissible for the problem dimensions (for example, m or n) to be passed as zero, in which case the computation (or part of it) is skipped. Negative dimensions are regarded as an error.

3.5 Normalizing Output Vectors

In cases where a function computes a set of orthogonal or unitary vectors, e.g., eigenvectors or an orthogonal matrix factorization, it is possible for these vectors to differ between implementations, but still be correct. Under a strict normalization that enforces uniqueness of solution, these different solutions can be shown to be the same under that normalization. For example, an eigenvector v is computed such that |v|2=1. However, the vector αv, where α is a scalar such that |α|2=1, is also an eigenvector. So for symmetric eigenproblems where eigenvectors are real valued, α=1, or -1; and for complex eigenvectors, α can lie anywhere on the unit circle on the complex plane, α=exp(iθ).
Another example is in the computation of the singular valued decomposition of a matrix. Consider the factorization
A = UKΣKH VH ,  
where K is a diagonal matrix with elements on the unit circle. Then UK and VK are corresponding left and right singular vectors of A for any such choice of K.
The example programs for functions in Chapter F08 take care to perform post-processing normalizations, in such cases as those highlighted above, so that a unique set of results can be displayed over many implementations of the NAG Library (see Section 10 in f08yxc). Similar care should be taken to obtain unique vectors and matrices when calling functions in Chapter F08, particularly when these are used in equivalence tests.

4 Decision Trees

The following decision trees are principally for the computation (general purpose) functions.

4.1 General Purpose Functions

4.1.1 Eigenvalues and Eigenvectors

Tree 1: Real Symmetric Eigenvalue Problems

Are eigenvalues only required?   Are all the eigenvalues required?   Is A tridiagonal?   f08jcc or f08jfc
yesyesyes
  no   no   no
Is A band matrix?   (f08hec and f08jfc) or f08hcc
yes
  no
Is one triangle of A stored as a linear array?   (f08gec and f08jfc) or f08gcc
yes
  no
(f08fec and f08jfc) or f08fac or f08fcc
Is A tridiagonal?   f08jjc
yes
  no
Is A a band matrix?   f08hec and f08jjc
yes
  no
Is one triangle of A stored as a linear array?   f08gec and f08jjc
yes
  no
(f08fec and f08jjc) or f08fbc
Are all eigenvalues and eigenvectors required?   Is A tridiagonal?   f08jec, f08jcc, f08jhc or f08jlc
yesyes
  no   no
Is A a band matrix?   (f08hec and f08jec) or f08hcc
yes
  no
Is one triangle of A stored as a linear array?   (f08gec, f08gfc and f08jec) or f08gcc
yes
  no
(f08fec, f08ffc and f08jec) or f08fac or f08fcc
Is A tridiagonal?   f08jjc, f08jkc or f08jlc
yes
  no
Is one triangle of A stored as a linear array?   f08gec, f08jjc, f08jkc and f08ggc
yes
  no
(f08fec, f08jjc, f08jkc and f08fgc) or f08fbc

Tree 2: Real Generalized Symmetric-definite Eigenvalue Problems

Are eigenvalues only required?   Are all the eigenvalues required?   Are A and B band matrices?   f08ufc, f08uec, f08hec and f08jfc
yesyesyes
  no   no   no
Are A and B stored with one triangle as a linear array?   f07gdc, f08tec, f08gec and f08jfc
yes
  no
f07fdc, f08sec, f08fec and f08jfc
Are A and B band matrices?   f08ufc, f08uec, f08hec and f08jjc
yes
  no
Are A and B stored with one triangle as a linear array?   f07gdc, f08tec, f08gec and f08jjc
yes
  no
f07fdc, f08sec, f08gec and f08jjc
Are all eigenvalues and eigenvectors required?   Are A and B stored with one triangle as a linear array?   f07gdc, f08tec, f08gec, f08gfc, f08jec and f16plc
yesyes
  no   no
f07fdc, f08sec, f08fec, f08ffc, f08jec and f16yjc
Are A and B band matrices?   f08ufc, f08uec, f08hec, f08jkc and f16yjc
yes
  no
Are A and B stored with one triangle as a linear array?   f07gdc, f08tec, f08gec, f08jjc, f08jkc, f08ggc and f16plc
yes
  no
f07fdc, f08sec, f08fec, f08jjc, f08jkc, f08fgc and f16yjc
Note: the functions for band matrices only handle the problem Ax=λBx; the other functions handle all three types of problems (Ax=λBx, ABx=λx or BAx=λx) except that, if the problem is BAx=λx and eigenvectors are required, f16phc must be used instead of f16plc and f16yfc instead of f16yjc.

Tree 3: Real Nonsymmetric Eigenvalue Problems

Are eigenvalues required?   Is A an upper Hessenberg matrix?   f08pec
yesyes
  no   no
f08nac or f08nbc or (f08nhc, f08nec and f08pec)
Is the Schur factorization of A required?   Is A an upper Hessenberg matrix?   f08pec
yesyes
  no   no
f08nbc or (f08nec, f08nfc, f08pec or f08njc)
Are all eigenvectors required?   Is A an upper Hessenberg matrix?   f08pec or f08qkc
yesyes
  no   no
f08nac or f08nbc or (f08nhc, f08nec, f08nfc, f08pec, f08qkc or f08njc)
Is A an upper Hessenberg matrix?   f08pec or f08pkc
yes
  no
f08nhc, f08nec, f08pec, f08pkc, f08ngc or f08njc

Tree 4: Real Generalized Nonsymmetric Eigenvalue Problems

Are eigenvalues only required?   Are A and B in generalized upper Hessenberg form?   f08xec
yesyes
  no   no
f08wbc, or f08whc and f08wcc
Is the generalized Schur factorization of A and B required?   Are A and B in generalized upper Hessenberg form?   f08xec
yesyes
  no   no
f08xbc or f08xcc
Are A and B in generalized upper Hessenberg form?   f08xec and f08ykc
yes
  no
f08wbc, or f08whc, f08wcc and f08wjc

Tree 5: Complex Hermitian Eigenvalue Problems

Are eigenvalues only required?   Are all the eigenvalues required?   Is A a band matrix?   (f08hsc and f08jfc) or f08hqc
yesyesyes
  no   no   no
Is one triangle of A stored as a linear array?   (f08gsc and f08jfc) or f08gqc
yes
  no
(f08fsc and f08jfc) or f08fqc
Is A a band matrix?   f08hsc and f08jjc
yes
  no
Is one triangle of A stored as a linear array?   f08gsc and f08jjc
yes
  no
f08fsc and f08jjc
Are all eigenvalues and eigenvectors required?   Is A a band matrix?   (f08hsc and f08jsc) or f08hqc
yesyes
  no   no
Is one triangle of A stored as a linear array?   (f08gsc, f08gtc and f08jsc) or f08gqc
yes
  no
(f08fsc, f08ftc and f08jsc) or f08fqc
Is one triangle of A stored as a linear array?   f08gsc, f08jjc, f08jxc and f08guc
yes
  no
f08fsc, f08jjc, f08jxc and f08fuc

Tree 6: Complex Generalized Hermitian-definite Eigenvalue Problems

Are eigenvalues only required?   Are all eigenvalues required?   Are A and B stored with one triangle as a linear array?   f07grc, f08tsc, f08gsc and f08jfc
yesyesyes
  no   no   no
f07frc, f08ssc, f08fsc and f08jfc
Are A and B stored with one triangle as a linear array?   f07grc, f08tsc, f08gsc and f08jjc
yes
  no
f07frc, f08ssc, f08gsc and f08jjc
Are all eigenvalues and eigenvectors required?   Are A and B stored with one triangle as a linear array?   f07grc, f08tsc, f08gsc, f08gtc and f16psc
yesyes
  no   no
f07frc, f08ssc, f08fsc, f08ftc, f08jsc and f16zjc
Are A and B stored with one triangle as a linear array?   f07grc, f08tsc, f08gsc, f08jjc, f08jxc, f08guc and f16slc
yes
  no
f07frc, f08ssc, f08fsc, f08jjc, f08jxc, f08fuc and f16zjc

Tree 7: Complex non-Hermitian Eigenvalue Problems

Are eigenvalues only required?   Is A an upper Hessenberg matrix?   f08psc
yesyes
  no   no
f08nvc, f08nsc and f08psc
Is the Schur factorization of A required?   Is A an upper Hessenberg matrix?   f08psc
yesyes
  no   no
f08nsc, f08ntc, f08psc and f08nwc
Are all eigenvectors required?   Is A an upper Hessenberg matrix?   f08psc and f08qxc
yesyes
  no   no
f08nvc, f08nsc, f08ntc, f08psc, f08qxc and f08nwc
Is A an upper Hessenberg matrix?   f08psc and f08pxc
yes
  no
f08nvc, f08nsc, f08psc, f08pxc, f08nuc and f08nwc

Tree 8: Complex Generalized non-Hermitian Eigenvalue Problems

Are eigenvalues only required?   Are A and B in generalized upper Hessenberg form?   f08xsc
yesyes
  no   no
f08wpc, or f08wqc and f08wvc
Is the generalized Schur factorization of A and B required?   Are A and B in generalized upper Hessenberg form?   f08xsc
yesyes
  no   no
f08xpc or f08xqc
Are A and B in generalized upper Hessenberg form?   f08xsc and f08yxc
yes
  no
f08wpc, or f08wvc, f08wqc and f08wwc

4.1.2 Singular Value Decomposition

Tree 9: Singular Value Decomposition of a Matrix

Is A a complex matrix?   Is A banded?   f08lsc and f08msc
yesyes
  no   no
Are singular values only required?   f08ksc and f08msc
yes
  no
f08ksc, f08ktc, f08kvc, f08kwc, f08kzc and f08msc
Is A bidiagonal?   f08mbc and f08mec
yes
  no
Is A banded?   f08lec and f08mec
yes
  no
Are singular values only required?   f08kec and f08mec
yes
  no
f08kec, f08kfc, f08khc, f08kjc, f08kmc and f08mec

Tree 10: Singular Value Decompositon of a Matrix Pair

Are A and B complex matrices?   f08vqc
yes
  no
f08vcc

5 Functionality Index

Back transformation of eigenvectors from those of balanced forms,  
complex matrix   f08nwc
real matrix   f08njc
Back transformation of generalized eigenvectors from those of balanced forms,  
complex matrix   f08wwc
real matrix   f08wjc
Balancing,  
complex general matrix   f08nvc
complex general matrix pair   f08wvc
real general matrix   f08nhc
real general matrix pair   f08whc
Eigenvalue problems for condensed forms of matrices,  
complex Hermitian matrix,  
eigenvalues and eigenvectors,  
band matrix,  
all/selected eigenvalues and eigenvectors by root-free QR algorithm   f08hpc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm, using packed storage   f08hqc
all eigenvalues and eigenvectors by root-free QR algorithm   f08hnc
general matrix,  
all/selected eigenvalues and eigenvectors by root-free QR algorithm   f08fpc
all/selected eigenvalues and eigenvectors by root-free QR algorithm, using packed storage   f08gpc
all/selected eigenvalues and eigenvectors using Relatively Robust Representations   f08frc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08fqc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm, using packed storage   f08gqc
all eigenvalues and eigenvectors by root-free QR algorithm   f08fnc
all eigenvalues and eigenvectors by root-free QR algorithm, using packed storage   f08gnc
eigenvalues only,  
band matrix,  
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08hpc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08hnc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm, using packed storage   f08hqc
general matrix,  
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08fpc
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm, using packed storage   f08gpc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08fnc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm, using packed storage   f08gnc
complex upper Hessenberg matrix, reduced from complex general matrix,  
eigenvalues and Schur factorization   f08psc
selected right and/or left eigenvectors by inverse iteration   f08pxc
real bidiagonal matrix,  
singular value decomposition,  
after reduction from complex general matrix   f08msc
after reduction from real general matrix   f08mec
after reduction from real general matrix, using divide-and-conquer   f08mdc
real symmetric matrix,  
eigenvalues and eigenvectors,  
band matrix,  
all/selected eigenvalues and eigenvectors by root-free QR algorithm   f08hbc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08hcc
all eigenvalues and eigenvectors by root-free QR algorithm   f08hac
general matrix,  
all/selected eigenvalues and eigenvectors by root-free QR algorithm   f08fbc
all/selected eigenvalues and eigenvectors by root-free QR algorithm, using packed storage   f08gbc
all/selected eigenvalues and eigenvectors using Relatively Robust Representations   f08fdc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08fcc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm, using packed storage   f08gcc
all eigenvalues and eigenvectors by root-free QR algorithm   f08fac
all eigenvalues and eigenvectors by root-free QR algorithm, using packed storage   f08gac
eigenvalues only,  
band matrix,  
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08hbc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08hac
general matrix,  
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08fbc
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm, using packed storage   f08gbc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08fac
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm, using packed storage   f08gac
real symmetric tridiagonal matrix,  
eigenvalues and eigenvectors,  
after reduction from complex Hermitian matrix,  
all/selected eigenvalues and eigenvectors, using Relatively Robust Representations   f08jyc
all eigenvalues and eigenvectors   f08jsc
all eigenvalues and eigenvectors, positive definite matrix   f08juc
all eigenvalues and eigenvectors, using divide-and-conquer   f08jvc
selected eigenvectors by inverse iteration   f08jxc
all/selected eigenvalues and eigenvectors, using Relatively Robust Representations   f08jlc
all/selected eigenvalues and eigenvectors by root-free QR algorithm   f08jbc
all/selected eigenvalues and eigenvectors using Relatively Robust Representations   f08jdc
all eigenvalues and eigenvectors   f08jec
all eigenvalues and eigenvectors, by divide-and-conquer   f08jhc
all eigenvalues and eigenvectors, positive definite matrix   f08jgc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08jcc
all eigenvalues and eigenvectors by root-free QR algorithm   f08jac
selected eigenvectors by inverse iteration   f08jkc
eigenvalues only,  
all/selected eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08jbc
all eigenvalues by root-free QR algorithm   f08jfc
all eigenvalues by the Pal–Walker–Kahan variant of the QL or QR algorithm   f08jac
selected eigenvalues only   f08jjc
real upper Hessenberg matrix, reduced from real general matrix,  
eigenvalues and Schur factorization   f08pec
selected right and/or left eigenvectors by inverse iteration   f08pkc
Eigenvalue problems for nonsymmetric matrices,  
complex matrix,  
all eigenvalues, Schur form, Schur vectors and reciprocal condition numbers   f08ppc
all eigenvalues, Schur form and Schur vectors   f08pnc
all eigenvalues and left/right eigenvectors   f08nnc
all eigenvalues and left/right eigenvectors, plus balancing transformation and reciprocal condition numbers   f08npc
real matrix,  
all eigenvalues, real Schur form, Schur vectors and reciprocal condition numbers   f08pbc
all eigenvalues, real Schur form and Schur vectors   f08pac
all eigenvalues and left/right eigenvectors   f08nac
all eigenvalues and left/right eigenvectors, plus balancing transformation and reciprocal condition numbers    f08nbc
Eigenvalues and generalized Schur factorization,  
complex generalized upper Hessenberg form   f08xsc
real generalized upper Hessenberg form   f08xec
General Gauss–Markov linear model,  
solves a complex general Gauss–Markov linear model problem   f08zpc
solves a real general Gauss–Markov linear model problem   f08zbc
Generalized eigenvalue problems for condensed forms of matrices,  
complex Hermitian-definite eigenproblems,  
banded matrices,  
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08uqc
all eigenvalues and eigenvectors by reduction to tridiagonal form   f08unc
selected eigenvalues and eigenvectors by reduction to tridiagonal form   f08upc
general matrices,  
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08sqc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm, packed storage format   f08tqc
all eigenvalues and eigenvectors by reduction to tridiagonal form   f08snc
all eigenvalues and eigenvectors by reduction to tridiagonal form, packed storage format   f08tnc
selected eigenvalues and eigenvectors by reduction to tridiagonal form   f08spc
selected eigenvalues and eigenvectors by reduction to tridiagonal form, packed storage format   f08tpc
real symmetric-definite eigenproblems,  
banded matrices,  
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08ucc
all eigenvalues and eigenvectors by reduction to tridiagonal form   f08uac
selected eigenvalues and eigenvectors by reduction to tridiagonal form   f08ubc
general matrices,  
all eigenvalues and eigenvectors by a divide-and-conquer algorithm   f08scc
all eigenvalues and eigenvectors by a divide-and-conquer algorithm, packed storage format   f08tcc
all eigenvalues and eigenvectors by reduction to tridiagonal form   f08sac
all eigenvalues and eigenvectors by reduction to tridiagonal form, packed storage format   f08tac
selected eigenvalues and eigenvectors by reduction to tridiagonal form   f08sbc
selected eigenvalues and eigenvectors by reduction to tridiagonal form, packed storage format   f08tbc
Generalized eigenvalue problems for nonsymmetric matrix pairs,  
complex nonsymmetric matrix pairs,  
all eigenvalues, generalized Schur form, Schur vectors and reciprocal condition numbers   f08xpc
all eigenvalues, generalized Schur form and Schur vectors, using level 3 BLAS   f08xqc
all eigenvalues and left/right eigenvectors, plus the balancing transformation and reciprocal condition numbers   f08wpc
all eigenvalues and left/right eigenvectors, using level 3 BLAS   f08wqc
real nonsymmetric matrix pairs,  
all eigenvalues, generalized real Schur form and left/right Schur vectors, plus reciprocal condition numbers   f08xbc
all eigenvalues, generalized real Schur form and left/right Schur vectors, using level 3 BLAS   f08xcc
all eigenvalues and left/right eigenvectors, plus the balancing transformation and reciprocal condition numbers   f08wbc
all eigenvalues and left/right eigenvectors, using level 3 BLAS   f08wcc
Generalized QR factorization,  
complex matrices   f08zsc
real matrices   f08zec
Generalized RQ factorization,  
complex matrices   f08ztc
real matrices   f08zfc
Generalized singular value decomposition,  
after reduction from complex general matrix,  
complex triangular or trapezoidal matrix pair   f08ysc
after reduction from real general matrix,  
real triangular or trapezoidal matrix pair   f08yec
complex matrix pair, using level 3 BLAS   f08vqc
partitioned orthogonal matrix (CS decomposition)   f08rac
partitioned unitary matrix (CS decomposition)   f08rnc
real matrix pair, using level 3 BLAS   f08vcc
reduction of a pair of general matrices to triangular or trapezoidal form,  
complex matrices, using level 3 BLAS   f08vuc
real matrices, using level 3 BLAS   f08vgc
least squares problems,  
complex matrices,  
apply orthogonal matrix   f08bxc
minimum norm solution using a complete orthogonal factorization   f08bnc
minimum norm solution using the singular value decomposition   f08knc
minimum norm solution using the singular value decomposition (divide-and-conquer)   f08kqc
reduction of upper trapezoidal matrix to upper triangular form   f08bvc
real matrices,  
apply orthogonal matrix   f08bkc
minimum norm solution using a complete orthogonal factorization   f08bac
minimum norm solution using the singular value decomposition   f08kac
minimum norm solution using the singular value decomposition (divide-and-conquer)   f08kcc
reduction of upper trapezoidal matrix to upper triangular form   f08bhc
least squares problems with linear equality constraints,  
complex matrices,  
minimum norm solution subject to linear equality constraints using a generalized RQ factorization   f08znc
real matrices,  
minimum norm solution subject to linear equality constraints using a generalized RQ factorization   f08zac
Left and right eigenvectors of a pair of matrices,  
complex upper triangular matrices   f08yxc
real quasi-triangular matrices   f08ykc
LQ factorization and related operations,  
complex matrices,  
apply unitary matrix   f08axc
factorization   f08avc
form all or part of unitary matrix   f08awc
real matrices,  
apply orthogonal matrix   f08akc
factorization   f08ahc
form all or part of orthogonal matrix   f08ajc
Operations on eigenvectors of a real symmetric or complex Hermitian matrix, or singular vectors of a general matrix,  
estimate condition numbers   f08flc
Operations on generalized Schur factorization of a general matrix pair,  
complex matrix,  
estimate condition numbers of eigenvalues and/or eigenvectors   f08yyc
re-order Schur factorization   f08ytc
re-order Schur factorization, compute generalized eigenvalues and condition numbers   f08yuc
real matrix,  
estimate condition numbers of eigenvalues and/or eigenvectors   f08ylc
re-order Schur factorization   f08yfc
re-order Schur factorization, compute generalized eigenvalues and condition numbers   f08ygc
Operations on Schur factorization of a general matrix,  
complex matrix,  
compute left and/or right eigenvectors   f08qxc
estimate sensitivities of eigenvalues and/or eigenvectors   f08qyc
re-order Schur factorization   f08qtc
re-order Schur factorization, compute basis of invariant subspace, and estimate sensitivities   f08quc
real matrix,  
compute left and/or right eigenvectors   f08qkc
estimate sensitivities of eigenvalues and/or eigenvectors   f08qlc
re-order Schur factorization   f08qfc
re-order Schur factorization, compute basis of invariant subspace, and estimate sensitivities   f08qgc
Overdetermined and underdetermined linear systems,  
complex matrices,  
solves an overdetermined or undetermined complex linear system   f08anc
real matrices,  
solves an overdetermined or undetermined real linear system   f08aac
Performs a reduction of eigenvalue problems to condensed forms, and related operations,  
real rectangular band matrix to upper bidiagonal form   f08lec
QL factorization and related operations,  
complex matrices,  
apply unitary matrix   f08cuc
factorization   f08csc
form all or part of unitary matrix   f08ctc
real matrices,  
apply orthogonal matrix   f08cgc
factorization   f08cec
form all or part of orthogonal matrix   f08cfc
QR factorization and related operations,  
complex matrices,  
general matrices,  
apply unitary matrix   f08auc
apply unitary matrix, explicitly blocked   f08aqc
factorization   f08asc
factorization,  
with column pivoting, using BLAS-3   f08btc
factorization, explicitly blocked   f08apc
form all or part of unitary matrix   f08atc
triangular-pentagonal matrices,  
apply unitary matrix   f08bqc
factorization   f08bpc
real matrices,  
general matrices,  
apply orthogonal matrix   f08agc
apply orthogonal matrix, explicitly blocked   f08acc
factorization,  
with column pivoting, using BLAS-3   f08bfc
factorization, orthogonal matrix   f08aec
factorization, with explicit blocking   f08abc
form all or part of orthogonal matrix   f08afc
triangular-pentagonal matrices,  
apply orthogonal matrix   f08bbc
factorization   f08bcc
Reduction of a pair of general matrices to generalized upper Hessenberg form,  
orthogonal reduction, real matrices, using level 3 BLAS   f08wfc
unitary reduction, complex matrices, using level 3 BLAS   f08wtc
Reduction of eigenvalue problems to condensed forms, and related operations,  
complex general matrix to upper Hessenberg form,  
apply orthogonal matrix   f08nuc
form orthogonal matrix   f08ntc
reduce to Hessenberg form   f08nsc
complex Hermitian band matrix to real symmetric tridiagonal form   f08hsc
complex Hermitian matrix to real symmetric tridiagonal form,  
apply unitary matrix   f08fuc
apply unitary matrix, packed storage   f08guc
form unitary matrix   f08ftc
form unitary matrix, packed storage   f08gtc
reduce to tridiagonal form   f08fsc
reduce to tridiagonal form, packed storage   f08gsc
complex rectangular band matrix to real upper bidiagonal form   f08lsc
complex rectangular matrix to real bidiagonal form,  
apply unitary matrix   f08kuc
form unitary matrix   f08ktc
reduce to bidiagonal form   f08ksc
real general matrix to upper Hessenberg form,  
apply orthogonal matrix   f08ngc
form orthogonal matrix   f08nfc
reduce to Hessenberg form   f08nec
real rectangular matrix to bidiagonal form,  
apply orthogonal matrix   f08kgc
form orthogonal matrix   f08kfc
reduce to bidiagonal form   f08kec
real symmetric band matrix to symmetric tridiagonal form   f08hec
real symmetric matrix to symmetric tridiagonal form,  
apply orthogonal matrix   f08fgc
apply orthogonal matrix, packed storage   f08ggc
form orthogonal matrix   f08ffc
form orthogonal matrix, packed storage   f08gfc
reduce to tridiagonal form   f08fec
reduce to tridiagonal form, packed storage   f08gec
Reduction of generalized eigenproblems to standard eigenproblems,  
complex Hermitian-definite banded generalized eigenproblem Ax=λBx   f08usc
complex Hermitian-definite generalized eigenproblem Ax=λBxABx=λx or BAx=λx   f08ssc
complex Hermitian-definite generalized eigenproblem Ax=λBxABx=λx or BAx=λx, packed storage   f08tsc
real symmetric-definite banded generalized eigenproblem Ax=λBx   f08uec
real symmetric-definite generalized eigenproblem Ax=λBxABx=λx or BAx=λx   f08sec
real symmetric-definite generalized eigenproblem Ax=λBxABx=λx or BAx=λx, packed storage   f08tec
RQ factorization and related operations,  
complex matrices,  
apply unitary matrix   f08cxc
factorization   f08cvc
form all or part of unitary matrix   f08cwc
real matrices,  
apply orthogonal matrix   f08ckc
factorization   f08chc
form all or part of orthogonal matrix   f08cjc
Singular value decomposition,  
complex matrix,  
all/selected singular values and, optionally, the corresponding singular vectors   f08kzc
preconditioned Jacobi SVD using fast scaled rotations and de Rijks pivoting   f08kvc
using a divide-and-conquer algorithm   f08krc
using bidiagonal QR iteration   f08kpc
using fast scaled rotation and de Rijks pivoting   f08kwc
real matrix,  
all/selected singular values and, optionally, the corresponding singular vectors   f08kmc
preconditioned Jacobi SVD using fast scaled rotations and de Rijks pivoting   f08khc
using a divide-and-conquer algorithm   f08kdc
using bidiagonal QR iteration   f08kbc
using fast scaled rotation and de Rijks pivoting   f08kjc
real square bidiagonal matrix,  
all/selected singular values and, optionally, the corresponding singular vectors   f08mbc
Solve generalized Sylvester equation,  
complex matrices   f08yvc
real matrices   f08yhc
Solve reduced form of Sylvester matrix equation,  
complex matrices   f08qvc
real matrices   f08qhc
Split Cholesky factorization,  
complex Hermitian positive definite band matrix   f08utc
real symmetric positive definite band matrix   f08ufc

6 Auxiliary Functions Associated with Library Function Arguments

None.

7 Withdrawn or Deprecated Functions

The following lists all those functions that have been withdrawn since Mark 23 of the Library or are in the Library, but deprecated.
Function Status Replacement Function(s)
f08bec Deprecated f08bfc
f08bsc Deprecated f08btc
f08vac Deprecated f08vcc
f08vec Deprecated f08vgc
f08vnc Deprecated f08vqc
f08vsc Deprecated f08vuc
f08wac Deprecated f08wcc
f08wec Deprecated f08wfc
f08wnc Deprecated f08wqc
f08wsc Deprecated f08wtc
f08xac Deprecated f08xcc
f08xnc Deprecated f08xqc

8 References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia
Arioli M, Duff I S and de Rijk P P M (1989) On the augmented system approach to sparse least squares problems Numer. Math. 55 667–684
Demmel J W and Kahan W (1990) Accurate singular values of bidiagonal matrices SIAM J. Sci. Statist. Comput. 11 873–912
Golub G H and Van Loan C F (2012) Matrix Computations (4th Edition) Johns Hopkins University Press, Baltimore
Moler C B and Stewart G W (1973) An algorithm for generalized matrix eigenproblems SIAM J. Numer. Anal. 10 241–256
Parlett B N (1998) The Symmetric Eigenvalue Problem SIAM, Philadelphia
Stewart G W and Sun J-G (1990) Matrix Perturbation Theory Academic Press, London
Ward R C (1981) Balancing the generalized eigenvalue problem SIAM J. Sci. Stat. Comp. 2 141–152
Wilkinson J H (1965) The Algebraic Eigenvalue Problem Oxford University Press, Oxford
Wilkinson J H and Reinsch C (1971) Handbook for Automatic Computation II, Linear Algebra Springer–Verlag