NAG Library Routine Document

g07bbf  (estim_normal)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

g07bbf computes maximum likelihood estimates and their standard errors for arguments of the Normal distribution from grouped and/or censored data.

2
Specification

Fortran Interface
Subroutine g07bbf ( method, n, x, xc, ic, xmu, xsig, tol, maxit, sexmu, sexsig, corr, dev, nobs, nit, wk, ifail)
Integer, Intent (In):: n, ic(n), maxit
Integer, Intent (Inout):: ifail
Integer, Intent (Out):: nobs(4), nit
Real (Kind=nag_wp), Intent (In):: x(n), xc(n), tol
Real (Kind=nag_wp), Intent (Inout):: xmu, xsig
Real (Kind=nag_wp), Intent (Out):: sexmu, sexsig, corr, dev, wk(2*n)
Character (1), Intent (In):: method
C Header Interface
#include nagmk26.h
void  g07bbf_ ( const char *method, const Integer *n, const double x[], const double xc[], const Integer ic[], double *xmu, double *xsig, const double *tol, const Integer *maxit, double *sexmu, double *sexsig, double *corr, double *dev, Integer nobs[], Integer *nit, double wk[], Integer *ifail, const Charlen length_method)

3
Description

A sample of size n is taken from a Normal distribution with mean μ and variance σ2 and consists of grouped and/or censored data. Each of the n observations is known by a pair of values Li,Ui such that:
LixiUi.  
The data is represented as particular cases of this form:
Let the set A identify the exactly specified observations, sets B and C identify the observations censored on the right and left respectively, and set D identify the observations confined between two finite limits. Also let there be r exactly specified observations, i.e., the number in A. The probability density function for the standard Normal distribution is
Zx=12πexp-12x2 ,  -<x<  
and the cumulative distribution function is
PX= 1-QX=-XZxdx.  
The log-likelihood of the sample can be written as:
L μ,σ =-r logσ - 1 2 A x i -μ / σ 2 +B log Q l i + C log P u i + D log p i  
where pi=Pui-Pli and ui=Ui-μ/σ,  li=Li-μ/σ.
Let
Sxi=Zxi Qxi ,  S1li,ui=Zli-Zuipi  
and
S2li,ui=uiZui-liZlipi,  
then the first derivatives of the log-likelihood can be written as:
Lμ,σ μ =L1μ,σ=σ-2Axi-μ+σ-1BSli-σ-1CS-ui+σ-1DS1li,ui  
and
Lμ,σ σ =L2μ,σ=-rσ-1+σ-3A xi-μ 2+σ-1BliSli-σ-1CuiS-ui  
-σ-1DS2li,ui  
The maximum likelihood estimates, μ^ and σ^, are the solution to the equations:
L1μ^,σ^=0 (1)
and
L2μ^,σ^=0 (2)
and if the second derivatives 2 L 2 μ , 2 L μ σ  and 2L 2σ  are denoted by L11, L12 and L22 respectively, then estimates of the standard errors of μ^ and σ^ are given by:
seμ^=-L22 L11L22-L122 ,  seσ^=-L11 L11L22-L122  
and an estimate of the correlation of μ^ and σ^ is given by:
L12L12L22 .  
To obtain the maximum likelihood estimates the equations (1) and (2) can be solved using either the Newton–Raphson method or the Expectation-maximization EM algorithm of Dempster et al. (1977).
Newton–Raphson Method
This consists of using approximate estimates μ~ and σ~ to obtain improved estimates μ~+δμ~ and σ~+δσ~ by solving
δμ~L11+δσ~L12+L1=0, δμ~L12+δσ~L22+L2=0,  
for the corrections δμ~ and δσ~.
EM Algorithm
The expectation step consists of constructing the variable wi as follows:
if   iA,   wi= xi E Li< xi< Ui = μ+σ S1 li,ui (3)
if   iB,   wi= E xi xi> Li =μ+σS li S1 li,ui (4)
if   iC,   wi= E xi xi< Ui =μ-σS -ui li,ui (5)
if   iD,   wi= E xi Li< xi< Ui =μ+σ S1 li,ui (6)
the maximization step consists of substituting (3), (4), (5) and (6) into (1) and (2) giving:
μ^=i=1nw^i/n (7)
and
σ^2=i=1nw^i-μ^2/ r+BTl^i+CT-u^i+DT1l^i,u^i (8)
where
Tx=SxSx-x ,   T1l,u=S12l,u+S2l,u  
and where w^i, l^i and u^i are wi, li and ui evaluated at μ^ and σ^. Equations (3) to (8) are the basis of the EM iterative procedure for finding μ^ and σ^2. The procedure consists of alternately estimating μ^ and σ^2 using (7) and (8) and estimating w^i using (3) to (6).
In choosing between the two methods a general rule is that the Newton–Raphson method converges more quickly but requires good initial estimates whereas the EM algorithm converges slowly but is robust to the initial values. In the case of the censored Normal distribution, if only a small proportion of the observations are censored then estimates based on the exact observations should give good enough initial estimates for the Newton–Raphson method to be used. If there are a high proportion of censored observations then the EM algorithm should be used and if high accuracy is required the subsequent use of the Newton–Raphson method to refine the estimates obtained from the EM algorithm should be considered.

4
References

Dempster A P, Laird N M and Rubin D B (1977) Maximum likelihood from incomplete data via the EM algorithm (with discussion) J. Roy. Statist. Soc. Ser. B 39 1–38
Swan A V (1969) Algorithm AS 16. Maximum likelihood estimation from grouped and censored normal data Appl. Statist. 18 110–114
Wolynetz M S (1979) Maximum likelihood estimation from confined and censored normal data Appl. Statist. 28 185–195

5
Arguments

1:     method – Character(1)Input
On entry: indicates whether the Newton–Raphson or EM algorithm should be used.
If method='N', the Newton–Raphson algorithm is used.
If method='E', the EM algorithm is used.
Constraint: method='N' or 'E'.
2:     n – IntegerInput
On entry: n, the number of observations.
Constraint: n2.
3:     xn – Real (Kind=nag_wp) arrayInput
On entry: the observations xi, Li or Ui, for i=1,2,,n.
If the observation is exactly specified – the exact value, xi.
If the observation is right-censored – the lower value, Li.
If the observation is left-censored – the upper value, Ui.
If the observation is interval-censored – the lower or upper value, Li or Ui, (see xc).
4:     xcn – Real (Kind=nag_wp) arrayInput
On entry: if the jth observation, for j=1,2,,n is an interval-censored observation then xcj should contain the complementary value to xj, that is, if xj<xcj, then xcj contains upper value, Ui, and if xj>xcj, then xcj contains lower value, Li. Otherwise if the jth observation is exact or right- or left-censored xcj need not be set.
Note: if xj=xcj then the observation is ignored.
5:     icn – Integer arrayInput
On entry: ici contains the censoring codes for the ith observation, for i=1,2,,n.
If ici=0, the observation is exactly specified.
If ici=1, the observation is right-censored.
If ici=2, the observation is left-censored.
If ici=3, the observation is interval-censored.
Constraint: ici=0, 1, 2 or 3, for i=1,2,,n.
6:     xmu – Real (Kind=nag_wp)Input/Output
On entry: if xsig>0.0 the initial estimate of the mean, μ; otherwise xmu need not be set.
On exit: the maximum likelihood estimate, μ^, of μ.
7:     xsig – Real (Kind=nag_wp)Input/Output
On entry: specifies whether an initial estimate of μ and σ are to be supplied.
xsig>0.0
xsig is the initial estimate of σ and xmu must contain an initial estimate of μ.
xsig0.0
Initial estimates of xmu and xsig are calculated internally from:
(a) the exact observations, if the number of exactly specified observations is 2; or
(b) the interval-censored observations; if the number of interval-censored observations is 1; or
(c) they are set to 0.0 and 1.0 respectively.
On exit: the maximum likelihood estimate, σ^, of σ.
8:     tol – Real (Kind=nag_wp)Input
On entry: the relative precision required for the final estimates of μ and σ. Convergence is assumed when the absolute relative changes in the estimates of both μ and σ are less than tol.
If tol=0.0, a relative precision of 0.000005 is used.
Constraint: machine precision<tol1.0 or tol=0.0.
9:     maxit – IntegerInput
On entry: the maximum number of iterations.
If maxit0, a value of 25 is used.
10:   sexmu – Real (Kind=nag_wp)Output
On exit: the estimate of the standard error of μ^.
11:   sexsig – Real (Kind=nag_wp)Output
On exit: the estimate of the standard error of σ^.
12:   corr – Real (Kind=nag_wp)Output
On exit: the estimate of the correlation between μ^ and σ^.
13:   dev – Real (Kind=nag_wp)Output
On exit: the maximized log-likelihood, Lμ^,σ^.
14:   nobs4 – Integer arrayOutput
On exit: the number of the different types of each observation;
nobs1 contains number of right-censored observations.
nobs2 contains number of left-censored observations.
nobs3 contains number of interval-censored observations.
nobs4 contains number of exactly specified observations.
15:   nit – IntegerOutput
On exit: the number of iterations performed.
16:   wk2×n – Real (Kind=nag_wp) arrayWorkspace
17:   ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry,method'N' or 'E',
orn<2,
orici0, 1, 2 or 3, for some i,
ortol<0.0,
or0.0<tol<machine precision,
ortol>1.0.
ifail=2
The chosen method failed to converge in maxit iterations. You should either increase tol or maxit or, if using the EM algorithm try using the Newton–Raphson method with initial values those returned by the current call to g07bbf. All returned values will be reasonable approximations to the correct results if maxit is not very small.
ifail=3
The chosen method is diverging. This will be due to poor initial values. You should try different initial values.
ifail=4
g07bbf was unable to calculate the standard errors. This can be caused by the method starting to diverge when the maximum number of iterations was reached.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

The accuracy is controlled by the argument tol.
If high precision is requested with the EM algorithm then there is a possibility that, due to the slow convergence, before the correct solution has been reached the increments of μ^ and σ^ may be smaller than tol and the process will prematurely assume convergence.

8
Parallelism and Performance

g07bbf is not threaded in any implementation.

9
Further Comments

The process is deemed divergent if three successive increments of μ or σ increase.

10
Example

A sample of 18 observations and their censoring codes are read in and the Newton–Raphson method used to compute the estimates.

10.1
Program Text

Program Text (g07bbfe.f90)

10.2
Program Data

Program Data (g07bbfe.d)

10.3
Program Results

Program Results (g07bbfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017