NAG Library Routine Document

f01jff  (real_gen_matrix_frcht_pow)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

f01jff computes the Fréchet derivative LA,E of the pth power (where p is real) of the real n by n matrix A applied to the real n by n matrix E. The principal matrix power Ap is also returned.

2
Specification

Fortran Interface
Subroutine f01jff ( n, a, lda, e, lde, p, ifail)
Integer, Intent (In):: n, lda, lde
Integer, Intent (Inout):: ifail
Real (Kind=nag_wp), Intent (In):: p
Real (Kind=nag_wp), Intent (Inout):: a(lda,*), e(lde,*)
C Header Interface
#include nagmk26.h
void  f01jff_ ( const Integer *n, double a[], const Integer *lda, double e[], const Integer *lde, const double *p, Integer *ifail)

3
Description

For a matrix A with no eigenvalues on the closed negative real line, Ap (p) can be defined as
Ap= expplogA  
where logA is the principal logarithm of A (the unique logarithm whose spectrum lies in the strip z:-π<Imz<π).
The Fréchet derivative of the matrix pth power of A is the unique linear mapping ELA,E such that for any matrix E 
A+Ep - Ap - LA,E = oE .  
The derivative describes the first-order effect of perturbations in A on the matrix power Ap.
f01jff uses the algorithms of Higham and Lin (2011) and Higham and Lin (2013) to compute Ap and LA,E. The real number p is expressed as p=q+r where q-1,1 and r. Then Ap=AqAr. The integer power Ar is found using a combination of binary powering and, if necessary, matrix inversion. The fractional power Aq is computed using a Schur decomposition, a Padé approximant and the scaling and squaring method. The Padé approximant is differentiated in order to obtain the Fréchet derivative of Aq and LA,E is then computed using a combination of the chain rule and the product rule for Fréchet derivatives.

4
References

Higham N J (2008) Functions of Matrices: Theory and Computation SIAM, Philadelphia, PA, USA
Higham N J and Lin L (2011) A Schur–Padé algorithm for fractional powers of a matrix SIAM J. Matrix Anal. Appl. 32(3) 1056–1078
Higham N J and Lin L (2013) An improved Schur–Padé algorithm for fractional powers of a matrix and their Fréchet derivatives SIAM J. Matrix Anal. Appl. 34(3) 1341–1360

5
Arguments

1:     n – IntegerInput
On entry: n, the order of the matrix A.
Constraint: n0.
2:     alda* – Real (Kind=nag_wp) arrayInput/Output
Note: the second dimension of the array a must be at least n.
On entry: the n by n matrix A.
On exit: the n by n principal matrix pth power, Ap.
3:     lda – IntegerInput
On entry: the first dimension of the array a as declared in the (sub)program from which f01jff is called.
Constraint: ldan.
4:     elde* – Real (Kind=nag_wp) arrayInput/Output
Note: the second dimension of the array e must be at least n.
On entry: the n by n matrix E.
On exit: the Fréchet derivative LA,E.
5:     lde – IntegerInput
On entry: the first dimension of the array e as declared in the (sub)program from which f01jff is called.
Constraint: lden.
6:     p – Real (Kind=nag_wp)Input
On entry: the required power of A.
7:     ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
A has eigenvalues on the negative real line. The principal pth power is not defined in this case; f01kff can be used to find a complex, non-principal pth power.
ifail=2
A is singular so the pth power cannot be computed.
ifail=3
Ap has been computed using an IEEE double precision Padé approximant, although the arithmetic precision is higher than IEEE double precision.
ifail=4
An unexpected internal error occurred. This failure should not occur and suggests that the routine has been called incorrectly.
ifail=-1
On entry, n=value.
Constraint: n0.
ifail=-3
On entry, lda=value and n=value.
Constraint: ldan.
ifail=-5
On entry, lde=value and n=value.
Constraint: lden.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

For a normal matrix A (for which ATA=AAT), the Schur decomposition is diagonal and the computation of the fractional part of the matrix power reduces to evaluating powers of the eigenvalues of A and then constructing Ap using the Schur vectors. This should give a very accurate result. In general, however, no error bounds are available for the algorithm. See Higham and Lin (2011) and Higham and Lin (2013) for details and further discussion.
If the condition number of the matrix power is required then f01jef should be used.

8
Parallelism and Performance

f01jff is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
f01jff makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

The real allocatable memory required by the algorithm is approximately 6×n2.
The cost of the algorithm is On3 floating-point operations; see Higham and Lin (2011) and Higham and Lin (2013).
If the matrix pth power alone is required, without the Fréchet derivative, then f01eqf should be used. If the condition number of the matrix power is required then f01jef should be used. If A has negative real eigenvalues then f01kff can be used to return a complex, non-principal pth power and its Fréchet derivative LA,E.

10
Example

This example finds Ap and the Fréchet derivative of the matrix power LA,E, where p=0.2,
A = 3 3 2 1 3 1 0 2 1 1 4 3 3 0 3 1   and   E = 1 0 2 1 0 4 5 2 1 0 0 0 2 3 3 0 .  

10.1
Program Text

Program Text (f01jffe.f90)

10.2
Program Data

Program Data (f01jffe.d)

10.3
Program Results

Program Results (f01jffe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017