nag_zungql (f08ctc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_zungql (f08ctc)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_zungql (f08ctc) generates all or part of the complex m by m unitary matrix Q from a QL factorization computed by nag_zgeqlf (f08csc).

2  Specification

#include <nag.h>
#include <nagf08.h>
void  nag_zungql (Nag_OrderType order, Integer m, Integer n, Integer k, Complex a[], Integer pda, const Complex tau[], NagError *fail)

3  Description

nag_zungql (f08ctc) is intended to be used after a call to nag_zgeqlf (f08csc), which performs a QL factorization of a complex matrix A. The unitary matrix Q is represented as a product of elementary reflectors.
This function may be used to generate Q explicitly as a square matrix, or to form only its trailing columns.
Usually Q is determined from the QL factorization of an m by p matrix A with mp. The whole of Q may be computed by:
nag_zungql(order,m,m,p,a,pda,tau,&fail)
(note that the array a must have at least m columns) or its trailing p columns by:
nag_zungql(order,m,p,p,a,pda,tau,&fail)
The columns of Q returned by the last call form an orthonormal basis for the space spanned by the columns of A; thus nag_zgeqlf (f08csc) followed by nag_zungql (f08ctc) can be used to orthogonalize the columns of A.
The information returned by nag_zgeqlf (f08csc) also yields the QL factorization of the trailing k columns of A, where k<p. The unitary matrix arising from this factorization can be computed by:
nag_zungql(order,m,m,k,a,pda,tau,&fail)
or its trailing k columns by:
nag_zungql(order,m,k,k,a,pda,tau,&fail)

4  References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia http://www.netlib.org/lapack/lug
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5  Arguments

1:     order Nag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 2.3.1.3 in How to Use the NAG Library and its Documentation for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2:     m IntegerInput
On entry: m, the number of rows of the matrix Q.
Constraint: m0.
3:     n IntegerInput
On entry: n, the number of columns of the matrix Q.
Constraint: mn0.
4:     k IntegerInput
On entry: k, the number of elementary reflectors whose product defines the matrix Q.
Constraint: nk0.
5:     a[dim] ComplexInput/Output
Note: the dimension, dim, of the array a must be at least
  • max1,pda×n when order=Nag_ColMajor;
  • max1,m×pda when order=Nag_RowMajor.
On entry: details of the vectors which define the elementary reflectors, as returned by nag_zgeqlf (f08csc).
On exit: the m by n matrix Q.
If order=Nag_ColMajor, the i,jth element of the matrix is stored in a[j-1×pda+i-1].
If order=Nag_RowMajor, the i,jth element of the matrix is stored in a[i-1×pda+j-1].
6:     pda IntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraints:
  • if order=Nag_ColMajor, pdamax1,m;
  • if order=Nag_RowMajor, pdamax1,n.
7:     tau[dim] const ComplexInput
Note: the dimension, dim, of the array tau must be at least max1,k.
On entry: further details of the elementary reflectors, as returned by nag_zgeqlf (f08csc).
8:     fail NagError *Input/Output
The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, m=value.
Constraint: m0.
On entry, pda=value.
Constraint: pda>0.
NE_INT_2
On entry, m=value and n=value.
Constraint: mn0.
On entry, n=value and k=value.
Constraint: nk0.
On entry, pda=value and m=value.
Constraint: pdamax1,m.
On entry, pda=value and n=value.
Constraint: pdamax1,n.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.

7  Accuracy

The computed matrix Q differs from an exactly unitary matrix by a matrix E such that
E2 = Oε ,  
where ε is the machine precision.

8  Parallelism and Performance

nag_zungql (f08ctc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

The total number of real floating-point operations is approximately 16mnk-8 m+n k2 + 163 k3 ; when n=k, the number is approximately 83 n2 3m-n .
The real analogue of this function is nag_dorgql (f08cfc).

10  Example

This example generates the first four columns of the matrix Q of the QL factorization of A as returned by nag_zgeqlf (f08csc), where
A = 0.96-0.81i -0.03+0.96i -0.91+2.06i -0.05+0.41i -0.98+1.98i -1.20+0.19i -0.66+0.42i -0.81+0.56i 0.62-0.46i 1.01+0.02i 0.63-0.17i -1.11+0.60i -0.37+0.38i 0.19-0.54i -0.98-0.36i 0.22-0.20i 0.83+0.51i 0.20+0.01i -0.17-0.46i 1.47+1.59i 1.08-0.28i 0.20-0.12i -0.07+1.23i 0.26+0.26i .  

10.1  Program Text

Program Text (f08ctce.c)

10.2  Program Data

Program Data (f08ctce.d)

10.3  Program Results

Program Results (f08ctce.r)


nag_zungql (f08ctc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2016