# NAG Library Routine Document

## 1Purpose

g02cbf performs a simple linear regression with no constant, with dependent variable $y$ and independent variable $x$.

## 2Specification

Fortran Interface
 Subroutine g02cbf ( n, x, y,
 Integer, Intent (In) :: n Integer, Intent (Inout) :: ifail Real (Kind=nag_wp), Intent (In) :: x(n), y(n) Real (Kind=nag_wp), Intent (Out) :: result(20)
#include nagmk26.h
 void g02cbf_ (const Integer *n, const double x[], const double y[], double result[], Integer *ifail)

## 3Description

g02cbf fits a straight line of the form
 $y=bx$
to the data points
 $x1,y1,x2,y2,…,xn,yn ,$
such that
 $yi=bxi+ei, i=1,2,…,nn≥2.$
The routine calculates the regression coefficient, $b$, and the various other statistical quantities by minimizing
 $∑i=1nei2.$
The input data consists of the $n$ pairs of observations $\left({x}_{1},{y}_{1}\right),\left({x}_{2},{y}_{2}\right),\dots ,\left({x}_{n},{y}_{n}\right)$ on the independent variable $x$ and the dependent variable $y$.
The quantities calculated are:
(a) Means:
 $x-=1n∑i=1nxi; y-=1n∑i=1nyi.$
(b) Standard deviations:
 $sx=1n- 1 ∑i= 1n xi-x- 2; sy=1n- 1 ∑i= 1n yi-y- 2.$
(c) Pearson product-moment correlation coefficient:
 $r=∑i=1nxi-x-yi-y- ∑i=1n xi-x- 2∑i=1n yi-y- 2 .$
(d) The regression coefficient, $b$:
 $b=∑i=1nxiyi ∑i=1nxi2 .$
(e) The sum of squares attributable to the regression, $SSR$, the sum of squares of deviations about the regression, $SSD$, and the total sum of squares, $SST$:
 $SST=∑i=1nyi2; SSD=∑i=1n yi-bxi2, SSR=SST-SSD.$
(f) The degrees of freedom attributable to the regression, $DFR$, the degrees of freedom of deviations about the regression, $DFD$, and the total degrees of freedom, $DFT$:
 $DFT=n; DFD=n-1, DFR=1.$
(g) The mean square attributable to the regression, $MSR$, and the mean square of deviations about the regression, $MSD\text{.}$
 $MSR=SSR/DFR; MSD=SSD/DFD.$
(h) The $F$ value for the analysis of variance:
 $F=MSR/MSD.$
(i) The standard error of the regression coefficient:
 $seb=MSD ∑i= 1nxi2 .$
(j) The $t$ value for the regression coefficient:
 $tb=bseb .$

## 4References

Draper N R and Smith H (1985) Applied Regression Analysis (2nd Edition) Wiley

## 5Arguments

1:     $\mathbf{n}$ – IntegerInput
On entry: $n$, the number of pairs of observations.
Constraint: ${\mathbf{n}}>2$.
2:     $\mathbf{x}\left({\mathbf{n}}\right)$ – Real (Kind=nag_wp) arrayInput
On entry: ${\mathbf{x}}\left(\mathit{i}\right)$ must contain ${x}_{\mathit{i}}$, for $\mathit{i}=1,2,\dots ,n$.
3:     $\mathbf{y}\left({\mathbf{n}}\right)$ – Real (Kind=nag_wp) arrayInput
On entry: ${\mathbf{y}}\left(\mathit{i}\right)$ must contain ${y}_{\mathit{i}}$, for $\mathit{i}=1,2,\dots ,n$.
4:     $\mathbf{result}\left(20\right)$ – Real (Kind=nag_wp) arrayOutput
On exit: the following information:
 ${\mathbf{result}}\left(1\right)$ $\stackrel{-}{x}$, the mean value of the independent variable, $x$; ${\mathbf{result}}\left(2\right)$ $\stackrel{-}{y}$, the mean value of the dependent variable, $y$; ${\mathbf{result}}\left(3\right)$ ${s}_{x}$, the standard deviation of the independent variable, $x$; ${\mathbf{result}}\left(4\right)$ ${s}_{y}$, the standard deviation of the dependent variable, $y$; ${\mathbf{result}}\left(5\right)$ $r$, the Pearson product-moment correlation between the independent variable $x$ and the dependent variable $y$; ${\mathbf{result}}\left(6\right)$ $b$, the regression coefficient; ${\mathbf{result}}\left(7\right)$ the value $0.0$; ${\mathbf{result}}\left(8\right)$ $se\left(b\right)$, the standard error of the regression coefficient; ${\mathbf{result}}\left(9\right)$ the value $0.0$; ${\mathbf{result}}\left(10\right)$ $t\left(b\right)$, the $t$ value for the regression coefficient; ${\mathbf{result}}\left(11\right)$ the value $0.0$; ${\mathbf{result}}\left(12\right)$ $SSR$, the sum of squares attributable to the regression; ${\mathbf{result}}\left(13\right)$ $DFR$, the degrees of freedom attributable to the regression; ${\mathbf{result}}\left(14\right)$ $MSR$, the mean square attributable to the regression; ${\mathbf{result}}\left(15\right)$ $F$, the $F$ value for the analysis of variance; ${\mathbf{result}}\left(16\right)$ $SSD$, the sum of squares of deviations about the regression; ${\mathbf{result}}\left(17\right)$ $DFD$, the degrees of freedom of deviations about the regression; ${\mathbf{result}}\left(18\right)$ $MSD$, the mean square of deviations about the regression; ${\mathbf{result}}\left(19\right)$ $SST$, the total sum of squares; ${\mathbf{result}}\left(20\right)$ $DFT$, the total degrees of freedom.
5:     $\mathbf{ifail}$ – IntegerInput/Output
On entry: ifail must be set to $0$, $-1\text{​ or ​}1$. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value $-1\text{​ or ​}1$ is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is $0$. When the value $-\mathbf{1}\text{​ or ​}\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit: ${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see Section 6).

## 6Error Indicators and Warnings

If on entry ${\mathbf{ifail}}=0$ or $-1$, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
${\mathbf{ifail}}=1$
On entry, ${\mathbf{n}}=〈\mathit{\text{value}}〉$.
Constraint: ${\mathbf{n}}>2$.
${\mathbf{ifail}}=2$
On entry, all n values of at least one of x and y are identical.
${\mathbf{ifail}}=-99$
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

## 7Accuracy

g02cbf does not use additional precision arithmetic for the accumulation of scalar products, so there may be a loss of significant figures for large $n$.
If, in calculating $F$ or $t\left(b\right)$  (see Section 3), the numbers involved are such that the result would be outside the range of numbers which can be stored by the machine, then the answer is set to the largest quantity which can be stored as a real variable, by means of a call to x02alf.

## 8Parallelism and Performance

g02cbf is not threaded in any implementation.

Computation time depends on $n$.
g02cbf uses a two-pass algorithm.

## 10Example

This example reads in eight observations on each of two variables, and then performs a simple linear regression with no constant with the first variable as the independent variable, and the second variable as the dependent variable. Finally the results are printed.

### 10.1Program Text

Program Text (g02cbfe.f90)

### 10.2Program Data

Program Data (g02cbfe.d)

### 10.3Program Results

Program Results (g02cbfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017