NAG Library Function Document

nag_specfun_2f1_real (s22bec)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

nag_specfun_2f1_real (s22bec) returns a value for the Gauss hypergeometric function F 1 2 a,b;c;x  for real parameters a,b and c, and real argument x.

2
Specification

#include <nag.h>
#include <nags.h>
double  nag_specfun_2f1_real (double a, double b, double c, double x, NagError *fail)

3
Description

nag_specfun_2f1_real (s22bec) returns a value for the Gauss hypergeometric function F1 2 a,b;c;x  for real parameters a, b and c, and for real argument x.
The associated function nag_specfun_2f1_real_scaled (s22bfc) performs the same operations, but returns F1 2 a,b;c;x  in the scaled form F1 2 a,b;c;x=ffr×2fsc to allow calculations to be performed when F1 2 a,b;c;x  is not representable as a single working precision number. It also accepts the parameters a, b and c as summations of an integer and a decimal fraction, giving higher accuracy when any are close to an integer.
The Gauss hypergeometric function is a solution to the hypergeometric differential equation,
x1-x d2 f dx2 + c-a+b+1x d f dx - a b f = 0 . (1)
For x<1, it may be defined by the Gauss series,
F1 2 a,b;c;x = s=0 as bs cs s! xs = 1+ ab c x + aa+1 bb+1 cc+1 2! x2 + , (2)
where as=1aa+1a+2a+s-1 is the rising factorial of a. F1 2 a,b;c;x  is undefined for c=0 or c a negative integer.
For x<1, the series is absolutely convergent and F1 2 a,b;c;x  is finite.
For x<1, linear transformations of the form,
F1 2 a,b;c;x = C1 a1,b1,c1,x1 F1 2 a1, b1 ;c1;x1 + C2 a2,b2,c2,x2 F1 2 a2, b2 ;c2;x2 (3)
exist, where x1, x20,1. C1 and C2 are real valued functions of the parameters and argument, typically involving products of gamma functions. When these are degenerate, finite limiting cases exist. Hence for x<0, F1 2 a,b;c;x  is defined by analytic continuation, and for x<1, F1 2 a,b;c;x  is real and finite.
For x=1, the following apply:
In the complex plane, the principal branch of F1 2 a,b;c;z  is taken along the real axis from x=1.0 increasing. F1 2 a,b;c;z  is multivalued along this branch, and for real parameters a,b and c is typically not real valued. As such, this function will not compute a solution when x>1.
The solution strategy used by this function is primarily dependent upon the value of the argument x. Once trivial cases and the case x=1.0 are eliminated, this proceeds as follows.
For 0<x0.5, sets of safe parameters αi,j;βi,j;ζi,j; χj 1j2 ;1i4  are determined, such that the values of F 1 2 aj,bj;cj;xj  required for an appropriate transformation of the type (3) may be calculated either directly or using recurrence relations from the solutions of F 1 2 αi,j,βi,j ;ζi,j;χj . If c is positive, then only transformations with C2=0.0 will be used, implying only F 1 2 a1,b1;c1;x1  will be required, with the transformed argument x1=x. If c is negative, in some cases a transformation with C20.0 will be used, with the argument x2=1.0-x. The function then cycles through these sets until acceptable solutions are generated. If no computation produces an accurate answer, the least inaccurate answer is selected to complete the computation. See Section 7.
For 0.5<x<1.0, an identical approach is first used with the argument x. Should this fail, a linear transformation resulting in both transformed arguments satisfying xj=1.0-x is employed, and the above strategy for 0<x0.5 is utilized on both components. Further transformations in these sub-computations are however limited to single terms with no argument transformation.
For x<0, a linear transformation mapping the argument x to the interval 0,0.5 is first employed. The strategy for 0<x0.5 is then used on each component, including possible further two term transforms. To avoid some degenerate cases, a transform mapping the argument x to 0.5,1 may also be used.
In addition to the above restrictions on c and x, an artificial bound, arbnd, is placed on the magnitudes of a,b,c and x to minimize the occurrence of overflow in internal calculations, particularly those involving real to integer conversions. arbnd=0.0001×Imax, where Imax is the largest machine integer (see nag_max_integer (X02BBC)). It should however not be assumed that this function will produce accurate answers for all values of a,b,c and x satisfying this criterion.
This function also tests for non-finite values of the parameters and argument on entry, and assigns non-finite values upon completion if appropriate. See Section 9 and Chapter x07.
Please consult the NIST Digital Library of Mathematical Functions for a detailed discussion of the Gauss hypergeometric function including special cases, transformations, relations and asymptotic approximations.

4
References

NIST Digital Library of Mathematical Functions
Pearson J (2009) Computation of hypergeometric functions MSc Dissertation, Mathematical Institute, University of Oxford

5
Arguments

1:     a doubleInput
On entry: the parameter a.
Constraint: aarbnd.
2:     b doubleInput
On entry: the parameter b.
Constraint: barbnd.
3:     c doubleInput
On entry: the parameter c.
Constraints:
  • carbnd;
  • c0,-1,-2,.
4:     x doubleInput
On entry: the argument x.
Constraint: -arbnd<x1.
5:     fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_CANNOT_CALCULATE
An internal calculation has resulted in an undefined result.
NE_COMPLEX
On entry, x=value.
In general, F12a,b;c;x is not real valued when x>1.
NE_INFINITE
On entry, x=value, c=value, a+b=value.
F12a,b;c;1 is infinite in the case ca+b.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_OVERFLOW
Overflow occurred in a subcalculation of F12a,b;c;x. The result may or may not be infinite.
NE_REAL
On entry, c=value.
F12a,b;c;x is undefined when c is zero or a negative integer.
NE_REAL_RANGE_CONS
On entry, a does not satisfy aarbnd=value.
On entry, b does not satisfy barbnd=value.
On entry, c does not satisfy carbnd=value.
On entry, x does not satisfy xarbnd=value.
NE_TOTAL_PRECISION_LOSS
All approximations have completed, and the final residual estimate indicates no accuracy can be guaranteed.
Relative residual=value.
NW_OVERFLOW_WARN
On completion, overflow occurred in the evaluation of F12a,b;c;x.
NW_SOME_PRECISION_LOSS
All approximations have completed, and the final residual estimate indicates some precision may have been lost.
Relative residual=value.
NW_UNDERFLOW_WARN
Underflow occurred during the evaluation of F12a,b;c;x. The returned value may be inaccurate.

7
Accuracy

In general, if fail.code= NE_NOERROR, the value of F1 2 a,b;c;x  may be assumed accurate, with the possible loss of one or two decimal places. Assuming the result does not under or overflow, an error estimate res is made internally using equation (1). If the magnitude of res is sufficiently large, a different fail.code will be returned. Specifically,
fail.code= NE_NOERROR or NW_UNDERFLOW_WARN res1000ε
fail.code= NW_SOME_PRECISION_LOSS 1000ε<res0.1
fail.code= NE_TOTAL_PRECISION_LOSS res>0.1
where ε is the machine precision as returned by nag_machine_precision (X02AJC).
A further estimate of the residual can be constructed using equation (1), and the differential identity,
d F 1 2 a,b; c;x dx = ab c F 1 2 a+1,b+1; c+1;x d2 F 1 2 a,b; c;x dx2 = aa+1 bb+1 cc+1 F 1 2 a+2,b+2; c+2;x (4)
This estimate is however dependent upon the error involved in approximating F 1 2 a+1,b+1; c+1;x  and F 1 2 a+2,b+2; c+2;x .
Furthermore, the accuracy of the solution, and the error estimate, can be dependent upon the accuracy of the decimal fraction of the input parameters a and b. For example, if c=ci+cr=100+1.0e−6, then on a machine with 16 decimal digits of precision, the internal calculation of cr will only be accurate to 8 decimal places. This can subsequently pollute the final solution by several decimal places without affecting the residual estimate as greatly. Should you require higher accuracy in such regions, then you should use nag_specfun_2f1_real_scaled (s22bfc), which requires you to supply the correct decimal fraction.

8
Parallelism and Performance

nag_specfun_2f1_real (s22bec) is not threaded in any implementation.

9
Further Comments

nag_specfun_2f1_real (s22bec) returns non-finite values when appropriate. See Chapter x07 for more information on the definitions of non-finite values.
Should a non-finite value be returned, this will be indicated in the value of fail, as detailed in the following cases.
If fail.code= NE_NOERROR, or fail.code= NE_TOTAL_PRECISION_LOSS, NW_SOME_PRECISION_LOSS or NW_UNDERFLOW_WARN, a finite value will have been returned with an approximate accuracy as detailed in Section 7.
If fail.code= NE_INFINITE then F1 2 a,b;c;x  is infinite, and a signed infinity will have been returned. The sign of the infinity should be correct when taking the limit as x approaches 1 from below.
If fail.code= NW_OVERFLOW_WARN then upon completion, F1 2 a,b;c;x > Rmax , where Rmax is the largest machine number given by nag_real_largest_number (X02ALC), and hence is too large to be representable. The result will be returned as a signed infinity. The sign should be correct.
If fail.code= NE_OVERFLOW then overflow occurred during a subcalculation of F1 2 a,b;c;x . A signed infinity will have been returned, however there is no guarantee that this is representative of either the magnitude or the sign of F1 2 a,b;c;x .
For all other error exits, nag_specfun_2f1_real (s22bec) will return a signalling NaN (see nag_create_nan (x07bbc)).
If fail.code= NE_CANNOT_CALCULATE then an internal computation produced an undefined result. This may occur when two terms overflow with opposite signs, and the result is dependent upon their summation for example.
If fail.code= NE_REAL then c is too close to a negative integer or zero on entry, and F1 2 a,b;c;x  is considered undefined. Note, this will also be the case when c is a negative integer, and a (possibly trivial) linear transformation of the form (3) would result in either:
(i) all cj not being negative integers,
(ii) for any cj which remain as negative integers, one of the corresponding parameters aj or bj is a negative integer of magnitude less than cj.
In the first case, the transformation coefficients Cj aj,bj,cj,xj  are typically either infinite or undefined, preventing a solution being constructed. In the second case, the series (2) will terminate before the degenerate term, resulting in a polynomial of fixed degree, and hence potentially a finite solution.
If fail.code= NE_REAL_RANGE_CONS then no computation will have been performed. The actual solution may however be finite.
fail.code= NE_COMPLEX indicates x>1. Hence the requested solution is on the boundary of the principal branch of F1 2 a,b;c;x , and hence is multivalued, typically with a nonzero imaginary component. It is however strictly finite.

10
Example

This example evaluates F 1 2 a,b;c;x  at a fixed set of parameters a,b and c, and for several values for the argument x.

10.1
Program Text

Program Text (s22bece.c)

10.2
Program Data

None.

10.3
Program Results

Program Results (s22bece.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017