F04FEF (PDF version)
F04 Chapter Contents
F04 Chapter Introduction
NAG Library Manual

NAG Library Routine Document

F04FEF

Note:  before using this routine, please read the Users' Note for your implementation to check the interpretation of bold italicised terms and other implementation-dependent details.

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

F04FEF solves the Yule–Walker equations for a real symmetric positive definite Toeplitz system.

2  Specification

SUBROUTINE F04FEF ( N, T, X, WANTP, P, WANTV, V, VLAST, WORK, IFAIL)
INTEGER  N, IFAIL
REAL (KIND=nag_wp)  T(0:N), X(N), P(*), V(*), VLAST, WORK(N-1)
LOGICAL  WANTP, WANTV

3  Description

F04FEF solves the equations
Tx=-t,  
where T is the n by n symmetric positive definite Toeplitz matrix
T= τ0 τ1 τ2 τn-1 τ1 τ0 τ1 τn-2 τ2 τ1 τ0 τn-3 . . . . τn-1 τn-2 τn-3 τ0  
and t is the vector
tT=τ1,τ2τn.  
The routine uses the method of Durbin (see Durbin (1960) and Golub and Van Loan (1996)). Optionally the mean square prediction errors and/or the partial correlation coefficients for each step can be returned.

4  References

Bunch J R (1985) Stability of methods for solving Toeplitz systems of equations SIAM J. Sci. Statist. Comput. 6 349–364
Bunch J R (1987) The weak and strong stability of algorithms in numerical linear algebra Linear Algebra Appl. 88/89 49–66
Cybenko G (1980) The numerical stability of the Levinson–Durbin algorithm for Toeplitz systems of equations SIAM J. Sci. Statist. Comput. 1 303–319
Durbin J (1960) The fitting of time series models Rev. Inst. Internat. Stat. 28 233
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5  Parameters

1:     N – INTEGERInput
On entry: the order of the Toeplitz matrix T.
Constraint: N0. When N=0, then an immediate return is effected.
2:     T0:N – REAL (KIND=nag_wp) arrayInput
On entry: T0 must contain the value τ0 of the diagonal elements of T, and the remaining N elements of T must contain the elements of the vector t.
Constraint: T0>0.0. Note that if this is not true, then the Toeplitz matrix cannot be positive definite.
3:     XN – REAL (KIND=nag_wp) arrayOutput
On exit: the solution vector x.
4:     WANTP – LOGICALInput
On entry: must be set to .TRUE. if the partial (auto)correlation coefficients are required, and must be set to .FALSE. otherwise.
5:     P* – REAL (KIND=nag_wp) arrayOutput
Note: the dimension of the array P must be at least max1,N if WANTP=.TRUE., and at least 1 otherwise.
On exit: with WANTP as .TRUE., the ith element of P contains the partial (auto)correlation coefficient, or reflection coefficient, pi for the ith step. (See Section 9 and Chapter G13.) If WANTP is .FALSE., then P is not referenced. Note that in any case, xn=pn.
6:     WANTV – LOGICALInput
On entry: must be set to .TRUE. if the mean square prediction errors are required, and must be set to .FALSE. otherwise.
7:     V* – REAL (KIND=nag_wp) arrayOutput
Note: the dimension of the array V must be at least max1,N if WANTV=.TRUE., and at least 1 otherwise.
On exit: with WANTV as .TRUE., the ith element of V contains the mean square prediction error, or predictor error variance ratio, vi, for the ith step. (See Section 9 and Chapter G13.) If WANTV is .FALSE., then V is not referenced.
8:     VLAST – REAL (KIND=nag_wp)Output
On exit: the value of vn, the mean square prediction error for the final step.
9:     WORKN-1 – REAL (KIND=nag_wp) arrayWorkspace
10:   IFAIL – INTEGERInput/Output
On entry: IFAIL must be set to 0, -1​ or ​1. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, because for this routine the values of the output parameters may be useful even if IFAIL0 on exit, the recommended value is -1. When the value -1​ or ​1 is used it is essential to test the value of IFAIL on exit.
On exit: IFAIL=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6  Error Indicators and Warnings

If on entry IFAIL=0 or -1, explanatory error messages are output on the current error message unit (as defined by X04AAF).
Note: F04FEF may return useful information for one or more of the following detected errors or warnings.
Errors or warnings detected by the routine:
IFAIL=-1
On entry,N<0,
orT00.0.
IFAIL>0
The principal minor of order (IFAIL+1) of the Toeplitz matrix is not positive definite to working accuracy. If, on exit, xIFAIL is close to unity, then the principal minor was close to being singular, and the sequence τ0,τ1,,τIFAIL may be a valid sequence nevertheless. The first IFAIL elements of X return the solution of the equations
TIFAILx=-τ1,τ2,,τIFAILT,  
where TIFAIL is the IFAILth principal minor of T. Similarly, if WANTP and/or WANTV are true, then P and/or V return the first IFAIL elements of P and V respectively and VLAST returns vIFAIL. In particular if IFAIL=N, then the solution of the equations Tx=-t is returned in X, but τN is such that TN+1 would not be positive definite to working accuracy.
IFAIL=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.8 in the Essential Introduction for further information.
IFAIL=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.7 in the Essential Introduction for further information.
IFAIL=-999
Dynamic memory allocation failed.
See Section 3.6 in the Essential Introduction for further information.

7  Accuracy

The computed solution of the equations certainly satisfies
r=Tx+t,  
where r1 is approximately bounded by
r1cε i=1n1+pi-1 ,  
c being a modest function of n and ε being the machine precision. This bound is almost certainly pessimistic, but it has not yet been established whether or not the method of Durbin is backward stable. If pn is close to one, then the Toeplitz matrix is probably ill-conditioned and hence only just positive definite. For further information on stability issues see Bunch (1985), Bunch (1987), Cybenko (1980) and Golub and Van Loan (1996). The following bounds on T-11 hold:
max 1 vn-1 , 1 i=1 n-1 1-pi T-11 i=1 n-1 1+pi 1-pi .  
Note:  vn<vn-1. The norm of T-1 may also be estimated using routine F04YDF.

8  Parallelism and Performance

F04FEF is not threaded by NAG in any implementation.
F04FEF makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

The number of floating-point operations used by F04FEF is approximately 2n2, independent of the values of WANTP and WANTV.
The mean square prediction error, vi, is defined as
vi=τ0+τ1τ2τi-1yi-1/τ0,  
where yi is the solution of the equations
Tiyi=-τ1τ2τiT  
and the partial correlation coefficient, pi, is defined as the ith element of yi. Note that vi=1-pi2vi-1.

10  Example

This example finds the solution of the Yule–Walker equations Tx=-t, where
T= 4 3 2 1 3 4 3 2 2 3 4 3 1 2 3 4   and  t= 3 2 1 0 .  

10.1  Program Text

Program Text (f04fefe.f90)

10.2  Program Data

Program Data (f04fefe.d)

10.3  Program Results

Program Results (f04fefe.r)


F04FEF (PDF version)
F04 Chapter Contents
F04 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015