nag_smooth_spline_fit (g10abc) (PDF version)
g10 Chapter Contents
g10 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_smooth_spline_fit (g10abc)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_smooth_spline_fit (g10abc) fits a cubic smoothing spline for a given smoothing parameter.

2  Specification

#include <nag.h>
#include <nagg10.h>
void  nag_smooth_spline_fit (Nag_SmoothFitType mode, Integer n, const double x[], const double y[], const double wt[], double rho, double yhat[], double c[], Integer pdc, double *rss, double *df, double res[], double h[], double comm[], NagError *fail)

3  Description

nag_smooth_spline_fit (g10abc) fits a cubic smoothing spline to a set of n observations (xi, yi), for i=1,2,,n. The spline provides a flexible smooth function for situations in which a simple polynomial or nonlinear regression model is unsuitable.
Cubic smoothing splines arise as the unique real-valued solution function f, with absolutely continuous first derivative and squared-integrable second derivative, which minimizes:
i=1nwiyi-fxi2+ρ -fx2dx,  
where wi is the (optional) weight for the ith observation and ρ is the smoothing parameter. This criterion consists of two parts: the first measures the fit of the curve, and the second the smoothness of the curve. The value of the smoothing parameter ρ weights these two aspects; larger values of ρ give a smoother fitted curve but, in general, a poorer fit. For details of how the cubic spline can be estimated see Hutchinson and de Hoog (1985) and Reinsch (1967).
The fitted values, y^ = y^1,y^2,,y^nT , and weighted residuals, ri, can be written as
y^=Hy  and  ri=wiyi-y^i  
for a matrix H. The residual degrees of freedom for the spline is traceI-H and the diagonal elements of H, hii, are the leverages.
The parameter ρ can be chosen in a number of ways. The fit can be inspected for a number of different values of ρ. Alternatively the degrees of freedom for the spline, which determines the value of ρ, can be specified, or the (generalized) cross-validation can be minimized to give ρ; see nag_smooth_spline_estim (g10acc) for further details.
nag_smooth_spline_fit (g10abc) requires the xi to be strictly increasing. If two or more observations have the same xi-value then they should be replaced by a single observation with yi equal to the (weighted) mean of the y values and weight, wi, equal to the sum of the weights. This operation can be performed by nag_order_data (g10zac).
The computation is split into three phases.
(i) Compute matrices needed to fit spline.
(ii) Fit spline for a given value of ρ.
(iii) Compute spline coefficients.
When fitting the spline for several different values of ρ, phase (i) need only be carried out once and then phase (ii) repeated for different values of ρ. If the spline is being fitted as part of an iterative weighted least squares procedure phases (i) and (ii) have to be repeated for each set of weights. In either case, phase (iii) will often only have to be performed after the final fit has been computed.
The algorithm is based on Hutchinson (1986).

4  References

Hastie T J and Tibshirani R J (1990) Generalized Additive Models Chapman and Hall
Hutchinson M F (1986) Algorithm 642: A fast procedure for calculating minimum cross-validation cubic smoothing splines ACM Trans. Math. Software 12 150–153
Hutchinson M F and de Hoog F R (1985) Smoothing noisy data with spline functions Numer. Math. 47 99–106
Reinsch C H (1967) Smoothing by spline functions Numer. Math. 10 177–183

5  Arguments

1:     mode Nag_SmoothFitTypeInput
On entry: indicates in which mode the function is to be used.
mode=Nag_SmoothFitPartial
Initialization and fitting is performed. This partial fit can be used in an iterative weighted least squares context where the weights are changing at each call to nag_smooth_spline_fit (g10abc) or when the coefficients are not required.
mode=Nag_SmoothFitQuick
Fitting only is performed. Initialization must have been performed previously by a call to nag_smooth_spline_fit (g10abc) with mode=Nag_SmoothFitPartial. This quick fit may be called repeatedly with different values of rho without re-initialization.
mode=Nag_SmoothFitFull
Initialization and full fitting is performed and the function coefficients are calculated.
Constraint: mode=Nag_SmoothFitPartial, Nag_SmoothFitQuick or Nag_SmoothFitFull.
2:     n IntegerInput
On entry: n, the number of distinct observations.
Constraint: n3.
3:     x[n] const doubleInput
On entry: the distinct and ordered values xi, for i=1,2,,n.
Constraint: x[i-1]<x[i], for i=1,2,,n-1.
4:     y[n] const doubleInput
On entry: the values yi, for i=1,2,,n.
5:     wt[n] const doubleInput
On entry: optionally, the n weights.
If weights are not provided then wt must be set to NULL, in which case unit weights are assumed.
Constraint: wt[i-1]>0.0, for i=1,2,,n.
6:     rho doubleInput
On entry: ρ, the smoothing parameter.
Constraint: rho0.0.
7:     yhat[n] doubleOutput
On exit: the fitted values, y^i, for i=1,2,,n.
8:     c[pdc×3] doubleInput/Output
Note: the i,jth element of the matrix C is stored in c[j-1×pdc+i-1].
On entry: if mode=Nag_SmoothFitQuick, c must be unaltered from the previous call to nag_smooth_spline_fit (g10abc) with mode=Nag_SmoothFitPartial. Otherwise c need not be set.
On exit: if mode=Nag_SmoothFitFull, c contains the spline coefficients. More precisely, the value of the spline at t is given by c[2×pdc+i-1] × d + c[1×pdc+i-1] × d + c[i-1] × d + y^i , where xit<xi+1 and d=t-xi.
If mode=Nag_SmoothFitPartial or Nag_SmoothFitQuick, c contains information that will be used in a subsequent call to nag_smooth_spline_fit (g10abc) with mode=Nag_SmoothFitQuick.
9:     pdc IntegerInput
On entry: the stride separating matrix row elements in the array c.
Constraint: pdcn-1.
10:   rss double *Output
On exit: the (weighted) residual sum of squares.
11:   df double *Output
On exit: the residual degrees of freedom.
12:   res[n] doubleOutput
On exit: the (weighted) residuals, ri, for i=1,2,,n.
13:   h[n] doubleOutput
On exit: the leverages, hii, for i=1,2,,n.
14:   comm[9×n+14] doubleCommunication Array
On entry: if mode=Nag_SmoothFitQuick, comm must be unaltered from the previous call to nag_smooth_spline_fit (g10abc) with mode=Nag_SmoothFitPartial. Otherwise comm need not be set.
On exit: if mode=Nag_SmoothFitPartial or Nag_SmoothFitQuick, comm contains information that will be used in a subsequent call to nag_smooth_spline_fit (g10abc) with mode=Nag_SmoothFitQuick.
15:   fail NagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.2.1.2 in the Essential Introduction for further information.
NE_ARRAY_SIZE
On entry, pdc=value and n=value.
Constraint: pdcn-1.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, n=value.
Constraint: n3.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 3.6.6 in the Essential Introduction for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 3.6.5 in the Essential Introduction for further information.
NE_NOT_STRICTLY_INCREASING
On entry, x is not a strictly ordered array.
NE_REAL
On entry, rho=value.
Constraint: rho0.0.
NE_WEIGHTS_NOT_POSITIVE
On entry, at least one element of wt0.0.

7  Accuracy

Accuracy depends on the value of ρ and the position of the x values. The values of xi-xi-1 and wi are scaled and ρ is transformed to avoid underflow and overflow problems.

8  Parallelism and Performance

Not applicable.

9  Further Comments

The time taken by nag_smooth_spline_fit (g10abc) is of order n.
Regression splines with a small <n number of knots can be fitted by nag_1d_spline_fit_knots (e02bac) and nag_1d_spline_fit (e02bec).

10  Example

The data, given by Hastie and Tibshirani (1990), is the age, xi, and C-peptide concentration (pmol/ml), yi, from a study of the factors affecting insulin-dependent diabetes mellitus in children. The data is input, reduced to a strictly ordered set by nag_order_data (g10zac) and a series of splines fit using a range of values for the smoothing parameter, ρ.

10.1  Program Text

Program Text (g10abce.c)

10.2  Program Data

Program Data (g10abce.d)

10.3  Program Results

Program Results (g10abce.r)

GnuplotProduced by GNUPLOT 4.6 patchlevel 3 3 3.5 4 4.5 5 5.5 6 6.5 7 0 2 4 6 8 10 12 14 16 C-peptide concentration (pmol/ml) Age (years) Example Program Cubic Smoothing Spline Study of the factors affecting insulin-dependent diabetes mellitus in children Hastie and Tibshirani (1990) gnuplot_plot_1 raw data gnuplot_plot_2 ρ = 1 gnuplot_plot_3 ρ = 10 gnuplot_plot_4 ρ = 100

nag_smooth_spline_fit (g10abc) (PDF version)
g10 Chapter Contents
g10 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015