f16 Chapter Contents
f16 Chapter Introduction
NAG Library Manual

# NAG Library Function Documentnag_ztrmm (f16zfc)

## 1  Purpose

nag_ztrmm (f16zfc) performs matrix-matrix multiplication for a complex triangular matrix.

## 2  Specification

 #include #include
 void nag_ztrmm (Nag_OrderType order, Nag_SideType side, Nag_UploType uplo, Nag_TransType trans, Nag_DiagType diag, Integer m, Integer n, Complex alpha, const Complex a[], Integer pda, Complex b[], Integer pdb, NagError *fail)

## 3  Description

nag_ztrmm (f16zfc) performs one of the matrix-matrix operations
 $B←αAB, B←αATB, B←αAHB, B←αBA, B←αBAT or B←αBAH,$
where $B$ is an $m$ by $n$ complex matrix, $A$ is a complex triangular matrix, and $\alpha$ is a complex scalar.

## 4  References

Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001) Basic Linear Algebra Subprograms Technical (BLAST) Forum Standard University of Tennessee, Knoxville, Tennessee http://www.netlib.org/blas/blast-forum/blas-report.pdf

## 5  Arguments

1:     orderNag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by ${\mathbf{order}}=\mathrm{Nag_RowMajor}$. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.
Constraint: ${\mathbf{order}}=\mathrm{Nag_RowMajor}$ or $\mathrm{Nag_ColMajor}$.
2:     sideNag_SideTypeInput
On entry: specifies whether $B$ is operated on from the left or the right.
${\mathbf{side}}=\mathrm{Nag_LeftSide}$
$B$ is pre-multiplied from the left.
${\mathbf{side}}=\mathrm{Nag_RightSide}$
$B$ is post-multiplied from the right.
Constraint: ${\mathbf{side}}=\mathrm{Nag_LeftSide}$ or $\mathrm{Nag_RightSide}$.
3:     uploNag_UploTypeInput
On entry: specifies whether $A$ is upper or lower triangular.
${\mathbf{uplo}}=\mathrm{Nag_Upper}$
$A$ is upper triangular.
${\mathbf{uplo}}=\mathrm{Nag_Lower}$
$A$ is lower triangular.
Constraint: ${\mathbf{uplo}}=\mathrm{Nag_Upper}$ or $\mathrm{Nag_Lower}$.
4:     transNag_TransTypeInput
On entry: specifies whether the operation involves $A$, ${A}^{\mathrm{T}}$ or ${A}^{\mathrm{H}}$.
${\mathbf{trans}}=\mathrm{Nag_NoTrans}$
It involves $A$.
${\mathbf{trans}}=\mathrm{Nag_Trans}$
It involves ${A}^{\mathrm{T}}$.
${\mathbf{trans}}=\mathrm{Nag_ConjTrans}$
It involves ${A}^{\mathrm{H}}$.
Constraint: ${\mathbf{trans}}=\mathrm{Nag_NoTrans}$, $\mathrm{Nag_Trans}$ or $\mathrm{Nag_ConjTrans}$.
5:     diagNag_DiagTypeInput
On entry: specifies whether $A$ has nonunit or unit diagonal elements.
${\mathbf{diag}}=\mathrm{Nag_NonUnitDiag}$
The diagonal elements are stored explicitly.
${\mathbf{diag}}=\mathrm{Nag_UnitDiag}$
The diagonal elements are assumed to be $1$ and are not referenced.
Constraint: ${\mathbf{diag}}=\mathrm{Nag_NonUnitDiag}$ or $\mathrm{Nag_UnitDiag}$.
6:     mIntegerInput
On entry: $m$, the number of rows of the matrix $B$; the order of $A$ if ${\mathbf{side}}=\mathrm{Nag_LeftSide}$.
Constraint: ${\mathbf{m}}\ge 0$.
7:     nIntegerInput
On entry: $n$, the number of columns of the matrix $B$; the order of $A$ if ${\mathbf{side}}=\mathrm{Nag_RightSide}$.
Constraint: ${\mathbf{n}}\ge 0$.
8:     alphaComplexInput
On entry: the scalar $\alpha$.
9:     a[$\mathit{dim}$]const ComplexInput
Note: the dimension, dim, of the array a must be at least
• $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{pda}}×{\mathbf{m}}\right)$ when ${\mathbf{side}}=\mathrm{Nag_LeftSide}$;
• $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{pda}}×{\mathbf{n}}\right)$ when ${\mathbf{side}}=\mathrm{Nag_RightSide}$.
On entry: the triangular matrix $A$; $A$ is $m$ by $m$ if ${\mathbf{side}}=\mathrm{Nag_LeftSide}$, or $n$ by $n$ if ${\mathbf{side}}=\mathrm{Nag_RightSide}$.
If ${\mathbf{order}}=\mathrm{Nag_ColMajor}$, ${A}_{ij}$ is stored in ${\mathbf{a}}\left[\left(j-1\right)×{\mathbf{pda}}+i-1\right]$.
If ${\mathbf{order}}=\mathrm{Nag_RowMajor}$, ${A}_{ij}$ is stored in ${\mathbf{a}}\left[\left(i-1\right)×{\mathbf{pda}}+j-1\right]$.
If ${\mathbf{uplo}}=\mathrm{Nag_Upper}$, $A$ is upper triangular and the elements of the array corresponding to the lower triangular part of $A$ are not referenced.
If ${\mathbf{uplo}}=\mathrm{Nag_Lower}$, $A$ is lower triangular and the elements of the array corresponding to the upper triangular part of $A$ are not referenced.
If ${\mathbf{diag}}=\mathrm{Nag_UnitDiag}$, the diagonal elements of $A$ are assumed to be $1$, and are not referenced.
10:   pdaIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) of the matrix $A$ in the array a.
Constraints:
• if ${\mathbf{side}}=\mathrm{Nag_LeftSide}$, ${\mathbf{pda}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$;
• if ${\mathbf{side}}=\mathrm{Nag_RightSide}$, ${\mathbf{pda}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
11:   b[$\mathit{dim}$]ComplexInput/Output
Note: the dimension, dim, of the array b must be at least
• $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{pdb}}×{\mathbf{n}}\right)$ when ${\mathbf{order}}=\mathrm{Nag_ColMajor}$;
• $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}×{\mathbf{pdb}}\right)$ when ${\mathbf{order}}=\mathrm{Nag_RowMajor}$.
If ${\mathbf{order}}=\mathrm{Nag_ColMajor}$, ${B}_{ij}$ is stored in ${\mathbf{b}}\left[\left(j-1\right)×{\mathbf{pdb}}+i-1\right]$.
If ${\mathbf{order}}=\mathrm{Nag_RowMajor}$, ${B}_{ij}$ is stored in ${\mathbf{b}}\left[\left(i-1\right)×{\mathbf{pdb}}+j-1\right]$.
On entry: the $m$ by $n$ matrix $B$.
If ${\mathbf{alpha}}=0$, b need not be set.
On exit: the updated matrix $B$.
12:   pdbIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array b.
Constraints:
• if ${\mathbf{order}}=\mathrm{Nag_ColMajor}$, ${\mathbf{pdb}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$;
• if ${\mathbf{order}}=\mathrm{Nag_RowMajor}$, ${\mathbf{pdb}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
13:   failNagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

## 6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
On entry, argument $⟨\mathit{\text{value}}⟩$ had an illegal value.
NE_ENUM_INT_2
On entry, ${\mathbf{side}}=⟨\mathit{\text{value}}⟩$, ${\mathbf{m}}=⟨\mathit{\text{value}}⟩$, ${\mathbf{pda}}=⟨\mathit{\text{value}}⟩$.
Constraint: if ${\mathbf{side}}=\mathrm{Nag_LeftSide}$, ${\mathbf{pda}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$.
On entry, ${\mathbf{side}}=⟨\mathit{\text{value}}⟩$, ${\mathbf{n}}=⟨\mathit{\text{value}}⟩$, ${\mathbf{pda}}=⟨\mathit{\text{value}}⟩$.
Constraint: if ${\mathbf{side}}=\mathrm{Nag_RightSide}$, ${\mathbf{pda}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
NE_INT
On entry, ${\mathbf{m}}=⟨\mathit{\text{value}}⟩$.
Constraint: ${\mathbf{m}}\ge 0$.
On entry, ${\mathbf{n}}=⟨\mathit{\text{value}}⟩$.
Constraint: ${\mathbf{n}}\ge 0$.
NE_INT_2
On entry, ${\mathbf{pdb}}=⟨\mathit{\text{value}}⟩$, ${\mathbf{m}}=⟨\mathit{\text{value}}⟩$.
Constraint: ${\mathbf{pdb}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$.
On entry, ${\mathbf{pdb}}=⟨\mathit{\text{value}}⟩$ and ${\mathbf{n}}=⟨\mathit{\text{value}}⟩$.
Constraint: ${\mathbf{pdb}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

## 7  Accuracy

The BLAS standard requires accurate implementations which avoid unnecessary over/underflow (see Section 2.7 of Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001)).

Not applicable.

None.

## 10  Example

Premultiply complex $4$ by $2$ matrix $B$ by lower triangular $4$ by $4$ matrix $A$, $B←AB$, where
 $A = 4.78+4.56i 2.00-0.30i -4.11+1.25i 2.89-1.34i 2.36-4.25i 4.15+0.80i -1.89+1.15i 0.04-3.69i -0.02+0.46i 0.33-0.26i$
and
 $B = -5.0-2.0i 1.0+5.0i -3.0-1.0i -2.0-2.0i 2.0+1.0i 3.0+4.0i 4.0+3.0i 4.0-3.0i .$

### 10.1  Program Text

Program Text (f16zfce.c)

### 10.2  Program Data

Program Data (f16zfce.d)

### 10.3  Program Results

Program Results (f16zfce.r)