nag_zunmbr (f08kuc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_zunmbr (f08kuc)

+ Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_zunmbr (f08kuc) multiplies an arbitrary complex m by n matrix C by one of the complex unitary matrices Q or P which were determined by nag_zgebrd (f08ksc) when reducing a complex matrix to bidiagonal form.

2  Specification

#include <nag.h>
#include <nagf08.h>
void  nag_zunmbr (Nag_OrderType order, Nag_VectType vect, Nag_SideType side, Nag_TransType trans, Integer m, Integer n, Integer k, const Complex a[], Integer pda, const Complex tau[], Complex c[], Integer pdc, NagError *fail)

3  Description

nag_zunmbr (f08kuc) is intended to be used after a call to nag_zgebrd (f08ksc), which reduces a complex rectangular matrix A to real bidiagonal form B by a unitary transformation: A=QBPH. nag_zgebrd (f08ksc) represents the matrices Q and PH as products of elementary reflectors.
This function may be used to form one of the matrix products
QC , QHC , CQ , CQH , PC , PHC , CP ​ or ​ CPH ,
overwriting the result on C (which may be any complex rectangular matrix).

4  References

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5  Arguments

Note: in the descriptions below, r denotes the order of Q or PH: if side=Nag_LeftSide, r=m and if side=Nag_RightSide, r=n.
1:     orderNag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2:     vectNag_VectTypeInput
On entry: indicates whether Q or QH or P or PH is to be applied to C.
vect=Nag_ApplyQ
Q or QH is applied to C.
vect=Nag_ApplyP
P or PH is applied to C.
Constraint: vect=Nag_ApplyQ or Nag_ApplyP.
3:     sideNag_SideTypeInput
On entry: indicates how Q or QH or P or PH is to be applied to C.
side=Nag_LeftSide
Q or QH or P or PH is applied to C from the left.
side=Nag_RightSide
Q or QH or P or PH is applied to C from the right.
Constraint: side=Nag_LeftSide or Nag_RightSide.
4:     transNag_TransTypeInput
On entry: indicates whether Q or P or QH or PH is to be applied to C.
trans=Nag_NoTrans
Q or P is applied to C.
trans=Nag_ConjTrans
QH or PH is applied to C.
Constraint: trans=Nag_NoTrans or Nag_ConjTrans.
5:     mIntegerInput
On entry: m, the number of rows of the matrix C.
Constraint: m0.
6:     nIntegerInput
On entry: n, the number of columns of the matrix C.
Constraint: n0.
7:     kIntegerInput
On entry: if vect=Nag_ApplyQ, the number of columns in the original matrix A.
If vect=Nag_ApplyP, the number of rows in the original matrix A.
Constraint: k0.
8:     a[dim]const ComplexInput
Note: the dimension, dim, of the array a must be at least
  • max1,pda× minr,k  when vect=Nag_ApplyQ and order=Nag_ColMajor;
  • max1,r×pda when vect=Nag_ApplyQ and order=Nag_RowMajor;
  • max1,pda×r when vect=Nag_ApplyP and order=Nag_ColMajor;
  • max1,minr,k×pda when vect=Nag_ApplyP and order=Nag_RowMajor.
On entry: details of the vectors which define the elementary reflectors, as returned by nag_zgebrd (f08ksc).
9:     pdaIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraints:
  • if order=Nag_ColMajor,
    • if vect=Nag_ApplyQ, pda max1,r ;
    • if vect=Nag_ApplyP, pda max1,minr,k ;
  • if order=Nag_RowMajor,
    • if vect=Nag_ApplyQ, pda max1,minr,k ;
    • if vect=Nag_ApplyP, pdamax1,r.
10:   tau[dim]const ComplexInput
Note: the dimension, dim, of the array tau must be at least max1,minr,k.
On entry: further details of the elementary reflectors, as returned by nag_zgebrd (f08ksc) in its argument tauq if vect=Nag_ApplyQ, or in its argument taup if vect=Nag_ApplyP.
11:   c[dim]ComplexInput/Output
Note: the dimension, dim, of the array c must be at least
  • max1,pdc×n when order=Nag_ColMajor;
  • max1,m×pdc when order=Nag_RowMajor.
The i,jth element of the matrix C is stored in
  • c[j-1×pdc+i-1] when order=Nag_ColMajor;
  • c[i-1×pdc+j-1] when order=Nag_RowMajor.
On entry: the matrix C.
On exit: c is overwritten by QC or QHC or CQ or CHQ or PC or PHC or CP or CHP as specified by vectside and trans.
12:   pdcIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array c.
Constraints:
  • if order=Nag_ColMajor, pdcmax1,m;
  • if order=Nag_RowMajor, pdcmax1,n.
13:   failNagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_ENUM_INT_2
On entry, vect=value, pda=value, k=value.
Constraint: if vect=Nag_ApplyQ, pda max1,minr,k ;
if vect=Nag_ApplyP, pdamax1,r.
On entry, vect=value, pda=value and k=value.
Constraint: if vect=Nag_ApplyQ, pda max1,r ;
if vect=Nag_ApplyP, pda max1,minr,k .
NE_INT
On entry, k=value.
Constraint: k0.
On entry, m=value.
Constraint: m0.
On entry, n=value.
Constraint: n0.
On entry, pda=value.
Constraint: pda>0.
On entry, pdc=value.
Constraint: pdc>0.
NE_INT_2
On entry, pdc=value and m=value.
Constraint: pdcmax1,m.
On entry, pdc=value and n=value.
Constraint: pdcmax1,n.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

7  Accuracy

The computed result differs from the exact result by a matrix E such that
E2 = Oε C2 ,
where ε is the machine precision.

8  Parallelism and Performance

nag_zunmbr (f08kuc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_zunmbr (f08kuc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

The total number of real floating-point operations is approximately where k is the value of the argument k.
The real analogue of this function is nag_dormbr (f08kgc).

10  Example

For this function two examples are presented. Both illustrate how the reduction to bidiagonal form of a matrix A may be preceded by a QR or LQ factorization of A.
In the first example, m>n, and
A = 0.96-0.81i -0.03+0.96i -0.91+2.06i -0.05+0.41i -0.98+1.98i -1.20+0.19i -0.66+0.42i -0.81+0.56i 0.62-0.46i 1.01+0.02i 0.63-0.17i -1.11+0.60i -0.37+0.38i 0.19-0.54i -0.98-0.36i 0.22-0.20i 0.83+0.51i 0.20+0.01i -0.17-0.46i 1.47+1.59i 1.08-0.28i 0.20-0.12i -0.07+1.23i 0.26+0.26i .
The function first performs a QR factorization of A as A=QaR and then reduces the factor R to bidiagonal form B: R=QbBPH. Finally it forms Qa and calls nag_zunmbr (f08kuc) to form Q=QaQb.
In the second example, m<n, and
A = 0.28-0.36i 0.50-0.86i -0.77-0.48i 1.58+0.66i -0.50-1.10i -1.21+0.76i -0.32-0.24i -0.27-1.15i 0.36-0.51i -0.07+1.33i -0.75+0.47i -0.08+1.01i .
The function first performs an LQ factorization of A as A=LPaH and then reduces the factor L to bidiagonal form B: L=QBPbH. Finally it forms PbH and calls nag_zunmbr (f08kuc) to form PH=PbHPaH.

10.1  Program Text

Program Text (f08kuce.c)

10.2  Program Data

Program Data (f08kuce.d)

10.3  Program Results

Program Results (f08kuce.r)


nag_zunmbr (f08kuc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2014