Integer type:  int32  int64  nag_int  show int32  show int32  show int64  show int64  show nag_int  show nag_int

PDF version (NAG web site, 64-bit version, 64-bit version)
Chapter Contents
Chapter Introduction
NAG Toolbox

# NAG Toolbox: nag_sparse_complex_herm_sort (f11zp)

## Purpose

nag_sparse_complex_herm_sort (f11zp) sorts the nonzero elements of a sparse complex Hermitian matrix, represented in symmetric coordinate storage format.

## Syntax

[nz, a, irow, icol, istr, ifail] = f11zp(n, nz, a, irow, icol, dup, zer)
[nz, a, irow, icol, istr, ifail] = nag_sparse_complex_herm_sort(n, nz, a, irow, icol, dup, zer)

## Description

nag_sparse_complex_herm_sort (f11zp) takes a symmetric coordinate storage (SCS) representation (see Symmetric coordinate storage (SCS) format in the F11 Chapter Introduction) of a sparse $n$ by $n$ complex Hermitian matrix $A$, and reorders the nonzero elements by increasing row index and increasing column index within each row. Entries with duplicate row and column indices may be removed, or the values may be summed. Any entries with zero values may optionally be removed.
The function also returns a pointer array istr to the starting address of each row in $A$.

None.

## Parameters

### Compulsory Input Parameters

1:     $\mathrm{n}$int64int32nag_int scalar
$n$, the order of the matrix $A$.
Constraint: ${\mathbf{n}}\ge 1$.
2:     $\mathrm{nz}$int64int32nag_int scalar
The number of nonzero elements in the lower triangular part of the matrix $A$.
Constraint: ${\mathbf{nz}}\ge 0$.
3:     $\mathrm{a}\left(:\right)$ – complex array
The dimension of the array a must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The nonzero elements of the lower triangular part of the complex matrix $A$. These may be in any order and there may be multiple nonzero elements with the same row and column indices.
4:     $\mathrm{irow}\left(:\right)$int64int32nag_int array
The dimension of the array irow must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The row indices corresponding to the nonzero elements supplied in the array a.
Constraint: $1\le {\mathbf{irow}}\left(\mathit{i}\right)\le {\mathbf{n}}$, for $\mathit{i}=1,2,\dots ,{\mathbf{nz}}$.
5:     $\mathrm{icol}\left(:\right)$int64int32nag_int array
The dimension of the array icol must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The column indices corresponding to the nonzero elements supplied in the array a.
Constraint: $1\le {\mathbf{icol}}\left(\mathit{i}\right)\le {\mathbf{irow}}\left(\mathit{i}\right)$, for $\mathit{i}=1,2,\dots ,{\mathbf{nz}}$.
6:     $\mathrm{dup}$ – string (length ≥ 1)
Indicates how any nonzero elements with duplicate row and column indices are to be treated.
${\mathbf{dup}}=\text{'R'}$
The entries are removed.
${\mathbf{dup}}=\text{'S'}$
The relevant values in a are summed.
${\mathbf{dup}}=\text{'F'}$
The function fails with ${\mathbf{ifail}}={\mathbf{3}}$ on detecting a duplicate.
Constraint: ${\mathbf{dup}}=\text{'R'}$, $\text{'S'}$ or $\text{'F'}$.
7:     $\mathrm{zer}$ – string (length ≥ 1)
Indicates how any elements with zero values in array a are to be treated.
${\mathbf{zer}}=\text{'R'}$
The entries are removed.
${\mathbf{zer}}=\text{'K'}$
The entries are kept.
${\mathbf{zer}}=\text{'F'}$
The function fails with ${\mathbf{ifail}}={\mathbf{4}}$ on detecting a zero.
Constraint: ${\mathbf{zer}}=\text{'R'}$, $\text{'K'}$ or $\text{'F'}$.

None.

### Output Parameters

1:     $\mathrm{nz}$int64int32nag_int scalar
The number of lower triangular nonzero elements with unique row and column indices.
2:     $\mathrm{a}\left(:\right)$ – complex array
The dimension of the array a will be $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The lower triangular nonzero elements ordered by increasing row index, and by increasing column index within each row. Each nonzero element has a unique row and column index.
3:     $\mathrm{irow}\left(:\right)$int64int32nag_int array
The dimension of the array irow will be $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The first nz elements contain the row indices corresponding to the nonzero elements returned in the array a.
4:     $\mathrm{icol}\left(:\right)$int64int32nag_int array
The dimension of the array icol will be $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{nz}}\right)$
The first nz elements contain the column indices corresponding to the nonzero elements returned in the array a.
5:     $\mathrm{istr}\left({\mathbf{n}}+1\right)$int64int32nag_int array
${\mathbf{istr}}\left(\mathit{i}\right)$, for $\mathit{i}=1,2,\dots ,{\mathbf{n}}$, is the starting address in the arrays a, irow and icol of row $i$ of the matrix $A$. ${\mathbf{istr}}\left({\mathbf{n}}+1\right)$ is the address of the last nonzero element in $A$ plus one.
6:     $\mathrm{ifail}$int64int32nag_int scalar
${\mathbf{ifail}}={\mathbf{0}}$ unless the function detects an error (see Error Indicators and Warnings).

## Error Indicators and Warnings

Errors or warnings detected by the function:
${\mathbf{ifail}}=1$
 On entry, ${\mathbf{n}}<1$, or ${\mathbf{nz}}<0$, or ${\mathbf{dup}}\ne \text{'R'}$, $\text{'S'}$ or $\text{'F'}$, or ${\mathbf{zer}}\ne \text{'R'}$, $\text{'K'}$ or $\text{'F'}$.
${\mathbf{ifail}}=2$
On entry, a nonzero element has been supplied which does not lie in the lower triangular part of $A$, i.e., one or more of the following constraints have been violated:
• $1\le {\mathbf{irow}}\left(i\right)\le {\mathbf{n}}$,
• $1\le {\mathbf{icol}}\left(i\right)\le {\mathbf{irow}}\left(i\right)$,
for $i=1,2,\dots ,{\mathbf{nz}}$
${\mathbf{ifail}}=3$
On entry, ${\mathbf{dup}}=\text{'F'}$ and nonzero elements have been supplied which have duplicate row and column indices.
${\mathbf{ifail}}=4$
On entry, ${\mathbf{zer}}=\text{'F'}$ and at least one matrix element has been supplied with a zero coefficient value.
${\mathbf{ifail}}=-99$
An unexpected error has been triggered by this routine. Please contact NAG.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.

Not applicable.

## Further Comments

The time taken for a call to nag_sparse_complex_herm_sort (f11zp) is proportional to nz.
Note that the resulting matrix may have either rows or columns with no entries. If row $i$ has no entries then ${\mathbf{istr}}\left(i\right)={\mathbf{istr}}\left(i+1\right)$.

## Example

This example reads the SCS representation of a complex sparse Hermitian matrix $A$, calls nag_sparse_complex_herm_sort (f11zp) to reorder the nonzero elements, and outputs the original and the reordered representations.
```function f11zp_example

fprintf('f11zp example results\n\n');

n = int64(4);
nz = int64(9);
irow = zeros(nz,1,'int64');
icol = zeros(nz,1,'int64');
a = zeros(nz,1);
a(1:nz)    = [ 1 + 2i;     0 + 0i;      0 + 3i;
3 - 5i;     4 + 2i;      0 + 3i;
2 + 4i;     1 - 1i;      1 + 3i];
irow(1:nz) = [ 3;          2;           3;
4;          1;           2;
3;          3;           3];
icol(1:nz) = [ 2;          1;           2;
4;          1;           2;
3;          2;           2];
fprintf('Number of elements in original sparse matrix: %5d\n',nz);
disp('Original matrix ordering:');
fprintf('   k      a(k)      i_k  j_k\n');
for j = 1:nz
fprintf('%4d  (%4.1f,%4.1f)%5d%5d\n', j, real(a(j)), imag(a(j)), ...
irow(j),icol(j));
end

% Sum duplicates and remove zeros
dup = 'S';
zero = 'R';
[nz, a, irow, icol, istr, ifail] = ...
f11zp( ...
n, nz, a, irow, icol, dup, zero);

fprintf('\nNumber of elements in reordered sparse matrix: %5d\n',nz);
disp('New ordering:');
fprintf('   k      a(k)      i_k  j_k\n');
for j = 1:nz
fprintf('%4d  (%4.1f,%4.1f)%5d%5d\n', j, real(a(j)), imag(a(j)), ...
irow(j),icol(j));
end

```
```f11zp example results

Number of elements in original sparse matrix:     9
Original matrix ordering:
k      a(k)      i_k  j_k
1  ( 1.0, 2.0)    3    2
2  ( 0.0, 0.0)    2    1
3  ( 0.0, 3.0)    3    2
4  ( 3.0,-5.0)    4    4
5  ( 4.0, 2.0)    1    1
6  ( 0.0, 3.0)    2    2
7  ( 2.0, 4.0)    3    3
8  ( 1.0,-1.0)    3    2
9  ( 1.0, 3.0)    3    2

Number of elements in reordered sparse matrix:     5
New ordering:
k      a(k)      i_k  j_k
1  ( 4.0, 2.0)    1    1
2  ( 0.0, 3.0)    2    2
3  ( 3.0, 7.0)    3    2
4  ( 2.0, 4.0)    3    3
5  ( 3.0,-5.0)    4    4
```

PDF version (NAG web site, 64-bit version, 64-bit version)
Chapter Contents
Chapter Introduction
NAG Toolbox

© The Numerical Algorithms Group Ltd, Oxford, UK. 2009–2015