Integer type:  int32  int64  nag_int  show int32  show int32  show int64  show int64  show nag_int  show nag_int

Chapter Contents
Chapter Introduction
NAG Toolbox

# NAG Toolbox: nag_lapack_zunmtr (f08fu)

## Purpose

nag_lapack_zunmtr (f08fu) multiplies an arbitrary complex matrix $C$ by the complex unitary matrix $Q$ which was determined by nag_lapack_zhetrd (f08fs) when reducing a complex Hermitian matrix to tridiagonal form.

## Syntax

[c, info] = f08fu(side, uplo, trans, a, tau, c, 'm', m, 'n', n)
[c, info] = nag_lapack_zunmtr(side, uplo, trans, a, tau, c, 'm', m, 'n', n)

## Description

nag_lapack_zunmtr (f08fu) is intended to be used after a call to nag_lapack_zhetrd (f08fs), which reduces a complex Hermitian matrix $A$ to real symmetric tridiagonal form $T$ by a unitary similarity transformation: $A=QT{Q}^{\mathrm{H}}$. nag_lapack_zhetrd (f08fs) represents the unitary matrix $Q$ as a product of elementary reflectors.
This function may be used to form one of the matrix products
 $QC , QHC , CQ ​ or ​ CQH ,$
overwriting the result on $C$ (which may be any complex rectangular matrix).
A common application of this function is to transform a matrix $Z$ of eigenvectors of $T$ to the matrix $\mathit{QZ}$ of eigenvectors of $A$.

## References

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

## Parameters

### Compulsory Input Parameters

1:     $\mathrm{side}$ – string (length ≥ 1)
Indicates how $Q$ or ${Q}^{\mathrm{H}}$ is to be applied to $C$.
${\mathbf{side}}=\text{'L'}$
$Q$ or ${Q}^{\mathrm{H}}$ is applied to $C$ from the left.
${\mathbf{side}}=\text{'R'}$
$Q$ or ${Q}^{\mathrm{H}}$ is applied to $C$ from the right.
Constraint: ${\mathbf{side}}=\text{'L'}$ or $\text{'R'}$.
2:     $\mathrm{uplo}$ – string (length ≥ 1)
This must be the same argument uplo as supplied to nag_lapack_zhetrd (f08fs).
Constraint: ${\mathbf{uplo}}=\text{'U'}$ or $\text{'L'}$.
3:     $\mathrm{trans}$ – string (length ≥ 1)
Indicates whether $Q$ or ${Q}^{\mathrm{H}}$ is to be applied to $C$.
${\mathbf{trans}}=\text{'N'}$
$Q$ is applied to $C$.
${\mathbf{trans}}=\text{'C'}$
${Q}^{\mathrm{H}}$ is applied to $C$.
Constraint: ${\mathbf{trans}}=\text{'N'}$ or $\text{'C'}$.
4:     $\mathrm{a}\left(\mathit{lda},:\right)$ – complex array
The first dimension, $\mathit{lda}$, of the array a must satisfy
• if ${\mathbf{side}}=\text{'L'}$, $\mathit{lda}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$;
• if ${\mathbf{side}}=\text{'R'}$, $\mathit{lda}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
The second dimension of the array a must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$ if ${\mathbf{side}}=\text{'L'}$ and at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$ if ${\mathbf{side}}=\text{'R'}$.
Details of the vectors which define the elementary reflectors, as returned by nag_lapack_zhetrd (f08fs).
5:     $\mathrm{tau}\left(:\right)$ – complex array
The dimension of the array tau must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}-1\right)$ if ${\mathbf{side}}=\text{'L'}$ and at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}-1\right)$ if ${\mathbf{side}}=\text{'R'}$
Further details of the elementary reflectors, as returned by nag_lapack_zhetrd (f08fs).
6:     $\mathrm{c}\left(\mathit{ldc},:\right)$ – complex array
The first dimension of the array c must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$.
The second dimension of the array c must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
The $m$ by $n$ matrix $C$.

### Optional Input Parameters

1:     $\mathrm{m}$int64int32nag_int scalar
Default: the first dimension of the array c.
$m$, the number of rows of the matrix $C$; $m$ is also the order of $Q$ if ${\mathbf{side}}=\text{'L'}$.
Constraint: ${\mathbf{m}}\ge 0$.
2:     $\mathrm{n}$int64int32nag_int scalar
Default: the second dimension of the array c.
$n$, the number of columns of the matrix $C$; $n$ is also the order of $Q$ if ${\mathbf{side}}=\text{'R'}$.
Constraint: ${\mathbf{n}}\ge 0$.

### Output Parameters

1:     $\mathrm{c}\left(\mathit{ldc},:\right)$ – complex array
The first dimension of the array c will be $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{m}}\right)$.
The second dimension of the array c will be $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
c stores $QC$ or ${Q}^{\mathrm{H}}C$ or $CQ$ or $C{Q}^{\mathrm{H}}$ as specified by side and trans.
2:     $\mathrm{info}$int64int32nag_int scalar
${\mathbf{info}}=0$ unless the function detects an error (see Error Indicators and Warnings).

## Error Indicators and Warnings

${\mathbf{info}}=-i$
If ${\mathbf{info}}=-i$, parameter $i$ had an illegal value on entry. The parameters are numbered as follows:
1: side, 2: uplo, 3: trans, 4: m, 5: n, 6: a, 7: lda, 8: tau, 9: c, 10: ldc, 11: work, 12: lwork, 13: info.
It is possible that info refers to a parameter that is omitted from the MATLAB interface. This usually indicates that an error in one of the other input parameters has caused an incorrect value to be inferred.

## Accuracy

The computed result differs from the exact result by a matrix $E$ such that
 $E2 = Oε C2 ,$
where $\epsilon$ is the machine precision.

The total number of real floating-point operations is approximately $8{m}^{2}n$ if ${\mathbf{side}}=\text{'L'}$ and $8m{n}^{2}$ if ${\mathbf{side}}=\text{'R'}$.
The real analogue of this function is nag_lapack_dormtr (f08fg).

## Example

This example computes the two smallest eigenvalues, and the associated eigenvectors, of the matrix $A$, where
 $A = -2.28+0.00i 1.78-2.03i 2.26+0.10i -0.12+2.53i 1.78+2.03i -1.12+0.00i 0.01+0.43i -1.07+0.86i 2.26-0.10i 0.01-0.43i -0.37+0.00i 2.31-0.92i -0.12-2.53i -1.07-0.86i 2.31+0.92i -0.73+0.00i .$
Here $A$ is Hermitian and must first be reduced to tridiagonal form $T$ by nag_lapack_zhetrd (f08fs). The program then calls nag_lapack_dstebz (f08jj) to compute the requested eigenvalues and nag_lapack_zstein (f08jx) to compute the associated eigenvectors of $T$. Finally nag_lapack_zunmtr (f08fu) is called to transform the eigenvectors to those of $A$.
```function f08fu_example

fprintf('f08fu example results\n\n');

% Lower triangular part of Hermitian matrix A
uplo = 'L';
a = [-2.28 + 0.00i,  0.00 + 0i,     0    + 0i,     0    + 0i;
1.78 + 2.03i, -1.12 + 0i,     0    + 0i,     0    + 0i;
2.26 - 0.10i,  0.01 - 0.43i, -0.37 + 0i,     0    + 0i;
-0.12 - 2.53i, -1.07 - 0.86i,  2.31 + 0.92i, -0.73 + 0i];

% Reduce A to tridiagonal form
[aq, d, e, tau, info] = f08fs( ...
uplo, a);

% Calculate two smallest eigenvalues
range = 'Indices';
order = 'Block';
vl = 0;
vu = 0;
il = int64(1);
iu = int64(2);
abstol = 0;
[m, nsplit, w, iblock, isplit, info] = ...
f08jj( ...
range, order, vl, vu, il, iu, abstol, d, e);

% Corresponding eigenvectors of T
[tz, ifailv, info] = f08jx( ...
d, e, m, w, iblock, isplit);

% TRansform to eigenvalues of A (by premultiplying by Q)
trans = 'No transpose';
side = 'Left';
[z, info] = f08fu( ...
side, uplo, trans, aq, tau, tz);

% Normalize vectors, largest element is real and positive.
for i = 1:m
[~,k] = max(abs(real(z(:,i)))+abs(imag(z(:,i))));
z(:,i) = z(:,i)*conj(z(k,i))/abs(z(k,i));
end

disp(' Selected eigenvalues of A:');
disp(w(1:m));
disp(' Corresponding eigenvectors:');
disp(z);

```
```f08fu example results

Selected eigenvalues of A:
-6.0002
-3.0030

Corresponding eigenvectors:
0.7299 + 0.0000i  -0.2120 + 0.1497i
-0.1663 - 0.2061i   0.7307 + 0.0000i
-0.4165 - 0.1417i  -0.3291 + 0.0479i
0.1743 + 0.4162i   0.5200 + 0.1329i

```