NAG C Library Function Document

nag_complex_bessel_j (s17dec)

1
Purpose

nag_complex_bessel_j (s17dec) returns a sequence of values for the Bessel functions Jν+nz for complex z, non-negative ν and n=0,1,,N-1, with an option for exponential scaling.

2
Specification

#include <nag.h>
#include <nags.h>
void  nag_complex_bessel_j (double fnu, Complex z, Integer n, Nag_ScaleResType scal, Complex cy[], Integer *nz, NagError *fail)

3
Description

nag_complex_bessel_j (s17dec) evaluates a sequence of values for the Bessel function Jνz, where z is complex, -π<argzπ, and ν is the real, non-negative order. The N-member sequence is generated for orders ν, ν+1,,ν+N-1. Optionally, the sequence is scaled by the factor e-Imz.
Note:  although the function may not be called with ν less than zero, for negative orders the formula J-νz=Jνzcosπν-Yνzsinπν may be used (for the Bessel function Yνz, see nag_complex_bessel_y (s17dcc)).
The function is derived from the function CBESJ in Amos (1986). It is based on the relations Jνz=eνπi/2Iν-iz, Imz0.0, and Jνz=e-νπi/2Iνiz, Imz<0.0.
The Bessel function Iνz is computed using a variety of techniques depending on the region under consideration.
When N is greater than 1, extra values of Jνz are computed using recurrence relations.
For very large z or ν+N-1, argument reduction will cause total loss of accuracy, and so no computation is performed. For slightly smaller z or ν+N-1, the computation is performed but results are accurate to less than half of machine precision. If Imz is large, there is a risk of overflow and so no computation is performed. In all the above cases, a warning is given by the function.

4
References

NIST Digital Library of Mathematical Functions
Amos D E (1986) Algorithm 644: A portable package for Bessel functions of a complex argument and non-negative order ACM Trans. Math. Software 12 265–273

5
Arguments

1:     fnu doubleInput
On entry: ν, the order of the first member of the sequence of functions.
Constraint: fnu0.0.
2:     z ComplexInput
On entry: the argument z of the functions.
3:     n IntegerInput
On entry: N, the number of members required in the sequence Jνz,Jν+1z,,Jν+N-1z.
Constraint: n1.
4:     scal Nag_ScaleResTypeInput
On entry: the scaling option.
scal=Nag_UnscaleRes
The results are returned unscaled.
scal=Nag_ScaleRes
The results are returned scaled by the factor e-Imz.
Constraint: scal=Nag_UnscaleRes or Nag_ScaleRes.
5:     cy[n] ComplexOutput
On exit: the N required function values: cy[i-1] contains J ν+i-1 z , for i=1,2,,N.
6:     nz Integer *Output
On exit: the number of components of cy that are set to zero due to underflow. If nz>0, then elements cy[n-nz], cy[n-nz+1],,cy[n-1] are set to zero.
7:     fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, n=value.
Constraint: n1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_OVERFLOW_LIKELY
No computation because z.im=value>value, scal=Nag_UnscaleRes.
NE_REAL
On entry, fnu=value.
Constraint: fnu0.0.
NE_TERMINATION_FAILURE
No computation – algorithm termination condition not met.
NE_TOTAL_PRECISION_LOSS
No computation because z=value>value.
No computation because fnu+n-1=value>value.
NW_SOME_PRECISION_LOSS
Results lack precision because z=value>value.
Results lack precision because fnu+n-1=value>value.

7
Accuracy

All constants in nag_complex_bessel_j (s17dec) are given to approximately 18 digits of precision. Calling the number of digits of precision in the floating-point arithmetic being used t, then clearly the maximum number of correct digits in the results obtained is limited by p=mint,18. Because of errors in argument reduction when computing elementary functions inside nag_complex_bessel_j (s17dec), the actual number of correct digits is limited, in general, by p-s, where s max1, log10z , log10ν  represents the number of digits lost due to the argument reduction. Thus the larger the values of z and ν, the less the precision in the result. If nag_complex_bessel_j (s17dec) is called with n>1, then computation of function values via recurrence may lead to some further small loss of accuracy.
If function values which should nominally be identical are computed by calls to nag_complex_bessel_j (s17dec) with different base values of ν and different n, the computed values may not agree exactly. Empirical tests with modest values of ν and z have shown that the discrepancy is limited to the least significant 3 – 4 digits of precision.

8
Parallelism and Performance

nag_complex_bessel_j (s17dec) is not threaded in any implementation.

9
Further Comments

The time taken for a call of nag_complex_bessel_j (s17dec) is approximately proportional to the value of n, plus a constant. In general it is much cheaper to call nag_complex_bessel_j (s17dec) with n greater than 1, rather than to make N separate calls to nag_complex_bessel_j (s17dec).
Paradoxically, for some values of z and ν, it is cheaper to call nag_complex_bessel_j (s17dec) with a larger value of n than is required, and then discard the extra function values returned. However, it is not possible to state the precise circumstances in which this is likely to occur. It is due to the fact that the base value used to start recurrence may be calculated in different regions for different n, and the costs in each region may differ greatly.
Note that if the function required is J0x or J1x, i.e., ν=0.0 or 1.0, where x is real and positive, and only a single unscaled function value is required, then it may be much cheaper to call nag_bessel_j0 (s17aec) or nag_bessel_j1 (s17afc) respectively.

10
Example

This example prints a caption and then proceeds to read sets of data from the input data stream. The first datum is a value for the order fnu, the second is a complex value for the argument, z, and the third is a character value used as a flag to set the argument scal. The program calls the function with n=2 to evaluate the function for orders fnu and fnu+1, and it prints the results. The process is repeated until the end of the input data stream is encountered.

10.1
Program Text

Program Text (s17dece.c)

10.2
Program Data

Program Data (s17dece.d)

10.3
Program Results

Program Results (s17dece.r)