NAG C Library Function Document

nag_opt_lsq_check_deriv (e04yac)

1
Purpose

nag_opt_lsq_check_deriv (e04yac) checks that a user-supplied C function for evaluating a vector of functions and the matrix of their first derivatives produces derivative values which are consistent with the function values calculated.

2
Specification

#include <nag.h>
#include <nage04.h>
void  nag_opt_lsq_check_deriv (Integer m, Integer n,
void (*lsqfun)(Integer m, Integer n, const double x[], double fvec[], double fjac[], Integer tdfjac, Nag_Comm *comm),
const double x[], double fvec[], double fjac[], Integer tdfjac, Nag_Comm *comm, NagError *fail)

3
Description

The function nag_opt_lsq_deriv (e04gbc) for minimizing a sum of squares of m  nonlinear functions (or ‘residuals’), f i x 1 , x 2 , , x n , for i=1,2,,m and mn , requires you to supply a C function to evaluate the f i  and their first derivatives. nag_opt_lsq_check_deriv (e04yac) checks the derivatives calculated by such a user-supplied function. As well as the C function to be checked (lsqfun), you must supply a point x = x 1 , x 2 , , x n T  at which the check is to be made.
nag_opt_lsq_check_deriv (e04yac) first calls lsqfun to evaluate the f i x  and their first derivatives, and uses these to calculate the sum of squares F x = i=1 m f i x 2 , and its first derivatives g j = f xjx , for j=1,2,,n. The components of g  along two orthogonal directions (defined by unit vectors p 1  and p 2 , say) are then calculated; these will be gT p 1  and gT p 2  respectively. The same components are also estimated by finite differences, giving quantities
v k = F x + hp k - F x h ,   k = 1 , 2  
where h  is a small positive scalar. If the relative difference between v 1  and gT p 1  or between v 2  and gT p 2  is judged too large, an error indicator is set.

4
References

None.

5
Arguments

1:     m IntegerInput
2:     n IntegerInput
On entry: the number m  of residuals, f i x , and the number n  of variables, x j .
Constraint: 1 n m .
3:     lsqfun function, supplied by the userExternal Function
lsqfun must calculate the vector of values f i x  and their first derivatives fi xj  at any point x . (The minimization function nag_opt_lsq_deriv (e04gbc) gives you the option of resetting an argument, commflag , to terminate the minimization process immediately. nag_opt_lsq_check_deriv (e04yac) will also terminate immediately, without finishing the checking process, if the argument in question is reset to a negative value.)
The specification of lsqfun is:
void  lsqfun (Integer m, Integer n, const double x[], double fvec[], double fjac[], Integer tdfjac, Nag_Comm *comm)
1:     m IntegerInput
2:     n IntegerInput
On entry: the numbers m  and n  of residuals and variables, respectively.
3:     x[n] const doubleInput
On entry: the point x  at which the values of the f i  and the fi xj  are required.
4:     fvec[m] doubleOutput
On exit: unless commflag is reset to a negative number, then fvec[i-1]  must contain the value of f i  at the point x , for i=1,2,,m.
5:     fjac[m×tdfjac] doubleOutput
On exit: unless commflag is reset to a negative number, then the value in fjac[ i-1 × tdfjac + j - 1 ]  must be the first derivative fi xj  at the point x, for i=1,2,,m and j=1,2,,n.
6:     tdfjac IntegerInput
On entry: the stride separating matrix column elements in the array fjac.
7:     comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to lsqfun.
flagIntegerInput/Output
On entry: commflag will be set to 2.
On exit: if lsqfun resets commflag to some negative number then nag_opt_lsq_check_deriv (e04yac) will terminate immediately with the error indicator NE_USER_STOP. If fail is supplied to nag_opt_lsq_check_deriv (e04yac), fail.errnum will be set to your setting of commflag.
firstNag_BooleanInput
On entry: will be set to Nag_TRUE on the first call to lsqfun and Nag_FALSE for all subsequent calls.
nfIntegerInput
On entry: the number of calls made to lsqfun including the current one.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void * with a C compiler that defines void * and char * otherwise. Before calling nag_opt_lsq_check_deriv (e04yac) these pointers may be allocated memory and initialized with various quantities for use by lsqfun when called from nag_opt_lsq_check_deriv (e04yac).
Note: lsqfun should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by nag_opt_lsq_check_deriv (e04yac). If your code inadvertently does return any NaNs or infinities, nag_opt_lsq_check_deriv (e04yac) is likely to produce unexpected results.
The array x must not be changed within lsqfun.
4:     x[n] const doubleInput
On entry: x[j-1], for j=1,2,,n, must be set to the coordinates of a suitable point at which to check the derivatives calculated by lsqfun. ‘Obvious’ settings, such as 0.0 or 1.0, should not be used since, at such particular points, incorrect terms may take correct values (particularly zero), so that errors can go undetected. For a similar reason, it is preferable that no two elements of x should have the same value.
5:     fvec[m] doubleOutput
On exit: unless commflag  is set negative in the first call of lsqfun, fvec[i-1]  contains the value of f i  at the point given in x, for i=1,2,,m.
6:     fjac[m×tdfjac] doubleOutput
On exit: unless commflag  is set negative in the first call of lsqfun, fjac[i-1×tdfjac+j-1]  contains the value of the first derivative fi xj  at the point given in x, as calculated by lsqfun, for i=1,2,,m and j=1,2,,n.
7:     tdfjac IntegerInput
On entry: the stride separating matrix column elements in the array fjac.
Constraint: tdfjacn .
8:     comm Nag_Comm *Input/Output
Note: comm is a NAG defined type (see Section 3.3.1.1 in How to Use the NAG Library and its Documentation).
On entry/exit: structure containing pointers for communication to the user-defined function; see the above description of lsqfun for details. If you do not need to make use of this communication feature the null pointer NAGCOMM_NULL may be used in the call to nag_opt_lsq_check_deriv (e04yac); comm will then be declared internally for use in calls to lsqfun.
9:     fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_2_INT_ARG_LT
On entry, m=value  while n=value . These arguments must satisfy mn .
On entry, tdfjac=value  while n=value . These arguments must satisfy tdfjacn .
NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_DERIV_ERRORS
Large errors were found in the derivatives of the objective function. You should check carefully the derivation and programming of expressions for the fi xj , because it is very unlikely that lsqfun is calculating them correctly.
NE_INT_ARG_LT
On entry, n=value.
Constraint: n1.
NE_USER_STOP
User requested termination, user flag value =value .
This exit occurs if you set commflag  to a negative value in lsqfun. If fail is supplied the value of fail.errnum will be the same as your setting of commflag . The check on lsqfun will not have been completed.

7
Accuracy

fail.code is set to NE_DERIV_ERRORS if
vk - gT pk 2 h× gT pk 2 +1  
for k=1  or 2. (See Section 3 for definitions of the quantities involved.) The scalar h  is set equal to ε , where ε  is the machine precision as given by nag_machine_precision (X02AJC).

8
Parallelism and Performance

nag_opt_lsq_check_deriv (e04yac) is not threaded in any implementation.

9
Further Comments

nag_opt_lsq_check_deriv (e04yac) calls lsqfun three times.
Before using nag_opt_lsq_check_deriv (e04yac) to check the calculation of the first derivatives, you should be confident that lsqfun is calculating the residuals correctly.

10
Example

Suppose that it is intended to use nag_opt_lsq_deriv (e04gbc) to find least squares estimates of x 1 , x 2  and x 3  in the model
y = x 1 + t 1 x 2 t 2 + x 3 t 3  
using the 15 sets of data given in the following table:
y t 1 t 2 t 3 0.14 1.0 15.0 1.0 0.18 2.0 14.0 2.0 0.22 3.0 13.0 3.0 0.25 4.0 12.0 4.0 0.29 5.0 11.0 5.0 0.32 6.0 10.0 6.0 0.35 7.0 9.0 7.0 0.39 8.0 8.0 8.0 0.37 9.0 7.0 7.0 0.58 10.0 6.0 6.0 0.73 11.0 5.0 5.0 0.96 12.0 4.0 4.0 1.34 13.0 3.0 3.0 2.10 14.0 2.0 2.0 4.39 15.0 1.0 1.0  
The following program could be used to check the first derivatives calculated by the required function lsqfun. (The tests of whether commflag 0  or 1 in lsqfun are present for when lsqfun is called by nag_opt_lsq_deriv (e04gbc). nag_opt_lsq_check_deriv (e04yac) will always call lsqfun with commflag  set to 2.)

10.1
Program Text

Program Text (e04yace.c)

10.2
Program Data

Program Data (e04yace.d)

10.3
Program Results

Program Results (e04yace.r)