NAG Library Routine Document

f04lhf (real_blkdiag_fac_solve)


f04lhf calculates the approximate solution of a set of real linear equations with multiple right-hand sides, AX=B or ATX=B, where A is an almost block-diagonal matrix which has been factorized by f01lhf.


Fortran Interface
Subroutine f04lhf ( trans, n, nbloks, blkstr, a, lena, pivot, b, ldb, ir, ifail)
Integer, Intent (In):: n, nbloks, blkstr(3,nbloks), lena, pivot(n), ldb, ir
Integer, Intent (Inout):: ifail
Real (Kind=nag_wp), Intent (In):: a(lena)
Real (Kind=nag_wp), Intent (Inout):: b(ldb,ir)
Character (1), Intent (In):: trans
C Header Interface
#include <nagmk26.h>
void  f04lhf_ (const char *trans, const Integer *n, const Integer *nbloks, const Integer blkstr[], const double a[], const Integer *lena, const Integer pivot[], double b[], const Integer *ldb, const Integer *ir, Integer *ifail, const Charlen length_trans)


f04lhf solves a set of real linear equations AX=B or ATX=B, where A is almost block-diagonal. A must first be factorized by f01lhf. f04lhf then computes X by forward and backward substitution over the blocks.


Diaz J C, Fairweather G and Keast P (1983) Fortran packages for solving certain almost block diagonal linear systems by modified alternate row and column elimination ACM Trans. Math. Software 9 358–375


1:     trans – Character(1)Input
On entry: specifies the equations to be solved.
Solve AX=B.
Solve ATX=B.
Constraint: trans='N' or 'T'.
2:     n – IntegerInput
On entry: n, the order of the matrix A.
Constraint: n>0.
3:     nbloks – IntegerInput
On entry: the total number of blocks of the matrix A, as supplied to f04lhf.
Constraint: 0<nbloksn.
4:     blkstr3nbloks – Integer arrayInput
On entry: information which describes the block structure of A, as supplied to f04lhf.
5:     alena – Real (Kind=nag_wp) arrayInput
On entry: the elements in the factorization of A, as returned by f04lhf.
6:     lena – IntegerInput
On entry: the dimension of the array a as declared in the (sub)program from which f04lhf is called.
Constraint: lenak=1nbloks blkstr1k × blkstr2k .
7:     pivotn – Integer arrayInput
On entry: details of the interchanges in the factorization, as returned by f04lhf.
8:     bldbir – Real (Kind=nag_wp) arrayInput/Output
On entry: the n by r right-hand side matrix B.
On exit: b is overwritten by the n by r solution matrix X.
9:     ldb – IntegerInput
On entry: the first dimension of the array b as declared in the (sub)program from which f04lhf is called.
Constraint: ldbn.
10:   ir – IntegerInput
On entry: r, the number of right-hand sides.
Constraint: ir>0.
11:   ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1 or 1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1 or 1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
On entry, ir=value.
Constraint: ir1.
On entry, K=value, blkstr2K=value, blkstr3K=value and blkstr1K=value.
Constraint: blkstr2K-blkstr3Kblkstr1K.
On entry, K=value, blkstr2K=value and blkstr1K=value.
Constraint: blkstr2Kblkstr1K.
On entry, K=value, blkstr3K=value, blkstr3K-1=value and blkstr2K=value.
Constraint: blkstr3K+blkstr3K-1blkstr2K.
On entry, K=value and blkstr1K=value.
Constraint: blkstr1K1.
On entry, K=value and blkstr2K=value.
Constraint: blkstr2K1.
On entry, K=value and blkstr3K=value.
Constraint: blkstr3K0.
On entry, ldb=value and n=value.
Constraint: ldbn.
On entry, lena is too small. lena=value. Minimum possible dimension: value.
On entry, n=value.
Constraint: n1.
On entry, n=value and nbloks=value.
Constraint: nnbloks.
On entry, nbloks=value.
Constraint: nbloks1.
On entry, the following equality does not hold: blkstr21+sumblkstr2k-blkstr3k-1:k=2,nbloks=n.
On entry, the following equality does not hold: sum blkstr1k : k=1 ,nbloks = n .
On entry, the following inequality was not satisfied for: J=value. sum blkstr2k - blkstr3k : k=1 ,J   sum blkstr1k : k=1 ,J   blkstr21 + sum blkstr2k - blkstr3k-1 : k=2 ,J .
On entry, trans'N' or 'T': trans=value.
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.


The accuracy of the computed solution depends on the conditioning of the original matrix A.

Parallelism and Performance

f04lhf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

Further Comments



This example solves the set of linear equations Ax=b where
A= -1.00 -0.98 -0.79 -0.15 -1.00 -0.25 -0.87 0.35 0.78 0.31 -0.85 0.89 -0.69 -0.98 -0.76 -0.82 0.12 -0.01 0.75 0.32 -1.00 -0.53 -0.83 -0.98 -0.58 0.04 0.87 0.38 -1.00 -0.21 -0.93 -0.84 0.37 -0.94 -0.96 -1.00 -0.99 -0.91 -0.28 0.90 0.78 -0.93 -0.76 0.48 -0.87 -0.14 -1.00 -0.59 -0.99 0.21 -0.73 -0.48 -0.93 -0.91 0.10 -0.89 -0.68 -0.09 -0.58 -0.21 0.85 -0.39 0.79 -0.71 0.39 -0.99 -0.12 -0.75 0.17 -1.37 1.29 -1.59 1.10 -1.63 -1.01 -0.27 0.08 0.61 0.54 -0.41 0.16 -0.46 -0.67 0.56 -0.99 0.16 -0.16 0.98 -0.24 -0.41 0.40 -0.93 0.70 0.43 0.71 -0.97 -0.60 -0.30 0.18 -0.47 -0.98 -0.73 0.07 0.04 -0.25 -0.92 -0.52 -0.46 -0.58 0.89 -0.94 -0.54 -1.00 -0.36  
b= -2.92 -1.17 -1.30 -1.17 -2.10 -4.51 -1.71 -4.59 -4.19 -0.93 -3.31 0.52 -0.12 -0.05 -0.98 -2.07 -2.73 -1.95  
The exact solution is

Program Text

Program Text (f04lhfe.f90)

Program Data

Program Data (f04lhfe.d)

Program Results

Program Results (f04lhfe.r)