nag_reml_mixed_regsn (g02jac) (PDF version)
g02 Chapter Contents
g02 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_reml_mixed_regsn (g02jac)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_reml_mixed_regsn (g02jac) fits a linear mixed effects regression model using restricted maximum likelihood (REML).

2  Specification

#include <nag.h>
#include <nagg02.h>
void  nag_reml_mixed_regsn (Integer n, Integer ncol, const double dat[], Integer tddat, const Integer levels[], Integer yvid, Integer cwid, Integer nfv, const Integer fvid[], Integer fint, Integer nrv, const Integer rvid[], Integer nvpr, const Integer vpr[], Integer rint, Integer svid, double gamma[], Integer *nff, Integer *nrf, Integer *df, double *reml, Integer lb, double b[], double se[], Integer maxit, double tol, Integer *warn, NagError *fail)

3  Description

nag_reml_mixed_regsn (g02jac) fits a model of the form:
y=Xβ+Zν+ε  
where and
Both ν  and ε  are assumed to have a Gaussian distribution with expectation zero and
Var ν ε = G 0 0 R  
where R= σ R 2 I , I  is the n×n  identity matrix and G  is a diagonal matrix. It is assumed that the random variables, Z , can be subdivided into g q  groups with each group being identically distributed with expectations zero and variance σi2 . The diagonal elements of matrix G  therefore take one of the values σi2 : i=1,2,,g , depending on which group the associated random variable belongs to.
The model therefore contains three sets of unknowns, the fixed effects, β , the random effects ν  and a vector of g+1  variance components, γ , where γ = σ12,σ22,, σ g-1 2 ,σg2,σR2 . Rather than working directly with γ , nag_reml_mixed_regsn (g02jac) uses an iterative process to estimate γ* = σ12 / σR2 , σ22 / σR2 ,, σg-12 / σR2 , σg2 / σR2 ,1 . Due to the iterative nature of the estimation a set of initial values, γ0 , for γ*  is required. nag_reml_mixed_regsn (g02jac) allows these initial values either to be supplied by you or calculated from the data using the minimum variance quadratic unbiased estimators (MIVQUE0) suggested by Rao (1972).
nag_reml_mixed_regsn (g02jac) fits the model using a quasi-Newton algorithm to maximize the restricted log-likelihood function:
-2 l R = log V + n-p log r V-1 r + log X V-1 X + n-p 1+ log 2 π / n-p  
where
V = ZG Z + R,   r=y-Xb   and   b = X V-1 X -1 X V-1 y .  
Once the final estimates for γ *  have been obtained, the value of σR2  is given by:
σR2 = r V-1 r / n - p .  
Case weights, Wc , can be incorporated into the model by replacing XX  and ZZ  with XWcX  and ZWcZ  respectively, for a diagonal weight matrix Wc .
The log-likelihood, lR, is calculated using the sweep algorithm detailed in Wolfinger et al. (1994).

4  References

Goodnight J H (1979) A tutorial on the SWEEP operator The American Statistician 33(3) 149–158
Harville D A (1977) Maximum likelihood approaches to variance component estimation and to related problems JASA 72 320–340
Rao C R (1972) Estimation of variance and covariance components in a linear model J. Am. Stat. Assoc. 67 112–115
Stroup W W (1989) Predictable functions and prediction space in the mixed model procedure Applications of Mixed Models in Agriculture and Related Disciplines Southern Cooperative Series Bulletin No. 343 39–48
Wolfinger R, Tobias R and Sall J (1994) Computing Gaussian likelihoods and their derivatives for general linear mixed models SIAM Sci. Statist. Comput. 15 1294–1310

5  Arguments

1:     n IntegerInput
On entry: n, the number of observations.
Constraint: n1.
2:     ncol IntegerInput
On entry: the number of columns in the data matrix, DAT.
Constraint: ncol1.
3:     dat[n×tddat] const doubleInput
Note: where DATi,j appears in this document, it refers to the array element dat[i-1×tddat+j-1].
On entry: array containing all of the data. For the ith observation:
  • DATi,yvid holds the dependent variable, y;
  • if cwid0, DATi,cwid holds the case weights;
  • if svid0, DATi,svid holds the subject variable.
The remaining columns hold the values of the independent variables.
Constraints:
  • if cwid0, DATi,cwid0.0;
  • if levels[j-1]1, 1DATi,jlevels[j-1].
4:     tddat IntegerInput
On entry: the stride separating matrix column elements in the array dat.
Constraint: tddatncol.
5:     levels[ncol] const IntegerInput
On entry: levels[i-1] contains the number of levels associated with the ith variable of the data matrix DAT. If this variable is continuous or binary (i.e., only takes the values zero or one) then levels[i-1] should be 1; if the variable is discrete then levels[i-1] is the number of levels associated with it and DATj,i is assumed to take the values 1 to levels[i-1], for j=1,2,,n.
Constraint: levels[i-1]1, for i=1,2,,ncol.
6:     yvid IntegerInput
On entry: the column of DAT holding the dependent, y, variable.
Constraint: 1yvidncol.
7:     cwid IntegerInput
On entry: the column of DAT holding the case weights.
If cwid=0, no weights are used.
Constraint: 0cwidncol.
8:     nfv IntegerInput
On entry: the number of independent variables in the model which are to be treated as being fixed.
Constraint: 0nfv<ncol.
9:     fvid[nfv] const IntegerInput
On entry: the columns of the data matrix DAT holding the fixed independent variables with fvid[i-1]  holding the column number corresponding to the i th fixed variable.
Constraint: 1fvid[i-1]ncol, for i=1,2,,nfv.
10:   fint IntegerInput
On entry: flag indicating whether a fixed intercept is included (fint=1).
Constraint: fint=0 or 1.
11:   nrv IntegerInput
On entry: the number of independent variables in the model which are to be treated as being random.
Constraints:
  • 0nrv<ncol;
  • nrv+rint>0.
12:   rvid[nrv] const IntegerInput
On entry: the columns of the data matrix DAT holding the random independent variables with rvid[i-1]  holding the column number corresponding to the i th random variable.
Constraint: 1rvid[i-1]ncol, for i=1,2,,nrv.
13:   nvpr IntegerInput
On entry: if rint=1 and svid0, nvpr is the number of variance components being estimated-2, (g-1), else nvpr=g.
If nrv=0, nvpr is not referenced.
Constraint: if nrv0, 1nvprnrv.
14:   vpr[nrv] const IntegerInput
On entry: vpr[i-1]  holds a flag indicating the variance of the i th random variable. The variance of the i th random variable is σ j 2 , where j = vpr[i-1] + 1  if rint=1 and svid0 and j = vpr[i-1]  otherwise. Random variables with the same value of j are assumed to be taken from the same distribution.
Constraint: 1vpr[i-1]nvpr, for i=1,2,,nrv.
15:   rint IntegerInput
On entry: flag indicating whether a random intercept is included (rint=1).
If svid=0, rint is not referenced.
Constraint: rint=0 or 1.
16:   svid IntegerInput
On entry: the column of DAT holding the subject variable.
If svid=0, no subject variable is used.
Specifying a subject variable is equivalent to specifying the interaction between that variable and all of the random-effects. Letting the notation Z1 × ZS  denote the interaction between variables Z1  and ZS , fitting a model with rint = 0 , random-effects Z1 + Z2  and subject variable ZS  is equivalent to fitting a model with random-effects Z1 × ZS + Z2 × ZS  and no subject variable. If rint = 1  the model is equivalent to fitting ZS + Z1 × ZS + Z2 × ZS  and no subject variable.
Constraint: 0svidncol.
17:   gamma[nvpr+2] doubleInput/Output
On entry: holds the initial values of the variance components, γ0 , with gamma[i-1] the initial value for σi2/σR2, for i=1,2,,g. If rint=1 and svid0, g=nvpr+1, else g=nvpr.
If gamma[0]=-1.0, the remaining elements of gamma are ignored and the initial values for the variance components are estimated from the data using MIVQUE0.
On exit: gamma[i-1], for i=1,2,,g, holds the final estimate of σi2 and gamma[g] holds the final estimate for σR2.
Constraint: gamma[0]=-1.0 ​ or ​ gamma[i-1]0.0, for i=1,2,,g.
18:   nff Integer *Output
On exit: the number of fixed effects estimated (i.e., the number of columns, p, in the design matrix X).
19:   nrf Integer *Output
On exit: the number of random effects estimated (i.e., the number of columns, q, in the design matrix Z).
20:   df Integer *Output
On exit: the degrees of freedom.
21:   reml double *Output
On exit: - 2 lR γ^  where lR  is the log of the restricted maximum likelihood calculated at γ^ , the estimated variance components returned in gamma.
22:   lb IntegerInput
On entry: the size of the array b.
Constraint: lb fint + i=1 nfv maxlevels[fvid[i-1]-1]-1,1 + LS × rint + i=1 nrv levels[rvid[i-1]-1]  where LS = levels[svid-1]  if svid0 and 1 otherwise.
23:   b[lb] doubleOutput
On exit: the parameter estimates, β,ν, with the first nff elements of b containing the fixed effect parameter estimates, β and the next nrf elements of b containing the random effect parameter estimates, ν.
Fixed effects
If fint=1, b[0] contains the estimate of the fixed intercept. Let Li  denote the number of levels associated with the ith fixed variable, that is Li = levels[fvid[i-1]-1] . Define
  • if fint=1, F1 = 2  else if fint=0, F1=1 ;
  • F i+1 = Fi + maxLi-1,1 , i1 .
Then for i=1,2,,nfv:
  • if Li > 1 , b[Fi+j-3]  contains the parameter estimate for the jth level of the ith fixed variable, for j=2,3,,Li;
  • if Li 1 , b[Fi-1]  contains the parameter estimate for the ith fixed variable.
Random effects
Redefining Li  to denote the number of levels associated with the ith random variable, that is Li = levels[rvid[i-1]-1] . Define
  • if rint=1, R1 = 2  else if rint=0, R1=1 ;
    R i+1 = Ri + Li , i1 .
Then for i = 1 , 2 , , nrv :
  • if svid=0,
    • if Li > 1 , b[nff+Ri+j-2]  contains the parameter estimate for the jth level of the ith random variable, for j=1,2,,Li;
    • if Li 1 , b[nff+Ri-1]  contains the parameter estimate for the ith random variable;
  • if svid 0 ,
    • let LS  denote the number of levels associated with the subject variable, that is LS = levels[svid-1] ;
    • if Li > 1 , b[nff+ s-1 LS+Ri+j-2]  contains the parameter estimate for the interaction between the sth level of the subject variable and the jth level of the ith random variable, for s=1,2,,LS and j=1,2,,Li;
    • if Li 1 , b[nff+ s-1 LS+Ri-1]  contains the parameter estimate for the interaction between the sth level of the subject variable and the ith random variable, for s=1,2,,LS;
    • if rint=1, b[nff]  contains the estimate of the random intercept.
24:   se[lb] doubleOutput
On exit: the standard errors of the parameter estimates given in b.
25:   maxit IntegerInput
On entry: the maximum number of iterations.
If maxit < 0 , the default value of 100  is used.
If maxit=0, the parameter estimates β,ν  and corresponding standard errors are calculated based on the value of γ0  supplied in gamma.
26:   tol doubleInput
On entry: the tolerance used to assess convergence.
If tol0.0, the default value of ε0.7 is used, where ε is the machine precision.
27:   warn Integer *Output
On exit: is set to 1  if a variance component was estimated to be a negative value during the fitting process. Otherwise warn is set to 0 .
If warn=1, the negative estimate is set to zero and the estimation process allowed to continue.
28:   fail NagError *Input/Output
The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
On entry, invalid data: categorical variable with value greater than that specified in levels.
NE_CONV
Routine failed to converge in maxit iterations: maxit=value.
See Section 10 for advice.
NE_FAIL_TOL
Routine failed to converge to specified tolerance: tol=value.
See Section 10 for advice.
NE_INT
On entry, fint=value.
Constraint: fint=0 or 1.
On entry, lb too small: lb=value.
On entry, levels[I]<1, for at least one I.
On entry, n<1 (nonzero weighted observations): n=value.
On entry, n=value.
Constraint: n1.
On entry, ncol=value.
Constraint: 1fvid[i]ncol, for all i.
On entry, ncol=value.
Constraint: 1rvid[i]ncol, for all i.
On entry, ncol=value.
Constraint: ncol1.
On entry, nvpr=value.
Constraint: 1vpr[i]nvpr, for all i.
On entry, rint=value.
Constraint: rint=0 or 1.
NE_INT_2
On entry, cwid=value and ncol=value.
Constraint: 0cwidncol  and any supplied weights must be 0.0.
On entry, nfv=value and ncol=value.
Constraint: 0nfv<ncol.
On entry, nrv=value and ncol=value.
Constraint: 0nrv<ncol and nrv+rint>0.
On entry, nvpr=value and nrv=value.
Constraint: 0nvprnrv and (nrv0 or nvpr1).
On entry, svid=value and ncol=value.
Constraint: 0svidncol.
On entry, tddat=value and ncol=value.
Constraint: tddatncol.
On entry, yvid=value and ncol=value.
Constraint: 1yvidncol.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_REAL
On entry, gamma[i]<0.0, for at least one i.
NE_ZERO_DOF_ERROR
Degrees of freedom <1: df=value.
This is due to the number of parameters exceeding the effective number of observations.

7  Accuracy

The accuracy of the results can be adjusted through the use of the tol argument.

8  Parallelism and Performance

nag_reml_mixed_regsn (g02jac) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_reml_mixed_regsn (g02jac) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

Wherever possible any block structure present in the design matrix Z should be modelled through a subject variable, specified via svid, rather than being explicitly entered into dat.
nag_reml_mixed_regsn (g02jac) uses an iterative process to fit the specified model and for some problems this process may fail to converge (see fail.code= NE_CONV or NE_FAIL_TOL). If the function fails to converge then the maximum number of iterations (see maxit) or tolerance (see tol) may require increasing; try a different starting estimate in gamma. Alternatively, the model can be fit using maximum likelihood (see nag_ml_mixed_regsn (g02jbc)) or using the noniterative MIVQUE0.
To fit the model just using MIVQUE0, the first element of gamma should be set to -1.0 and maxit should be set to zero.
Although the quasi-Newton algorithm used in nag_reml_mixed_regsn (g02jac) tends to require more iterations before converging compared to the Newton–Raphson algorithm recommended by Wolfinger et al. (1994), it does not require the second derivatives of the likelihood function to be calculated and consequentially takes significantly less time per iteration.

10  Example

The following dataset is taken from Stroup (1989) and arises from a balanced split-plot design with the whole plots arranged in a randomized complete block-design.
In this example the full design matrix for the random independent variable, Z , is given by:
Z = 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1  
= A 0 0 0 0 A 0 0 0 0 A 0 0 0 0 A A 0 0 0 0 A 0 0 0 0 A 0 0 0 0 A , (1)
where
A = 1 1 0 0 1 0 1 0 1 0 0 1 .  
The block structure evident in (1) is modelled by specifying a four-level subject variable, taking the values 1 , 1 , 1 , 2 , 2 , 2 , 3 , 3 , 3 , 4 , 4 , 4 , 1 , 1 , 1 , 2 , 2 , 2 , 3 , 3 , 3 , 4 , 4 , 4 . The first column of 1s  is added to A  by setting rint=1. The remaining columns of A are specified by a three level factor, taking the values, 1 , 2 , 3 , 1 , 2 , 3 , 1 , .

10.1  Program Text

Program Text (g02jace.c)

10.2  Program Data

Program Data (g02jace.d)

10.3  Program Results

Program Results (g02jace.r)


nag_reml_mixed_regsn (g02jac) (PDF version)
g02 Chapter Contents
g02 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2016