nag_zero_nonlin_eqns_expert (c05qcc) (PDF version)
c05 Chapter Contents
c05 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_zero_nonlin_eqns_expert (c05qcc)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_zero_nonlin_eqns_expert (c05qcc) is a comprehensive function that finds a solution of a system of nonlinear equations by a modification of the Powell hybrid method.

2  Specification

#include <nag.h>
#include <nagc05.h>
void  nag_zero_nonlin_eqns_expert (
void (*fcn)(Integer n, const double x[], double fvec[], Nag_Comm *comm, Integer *iflag),
Integer n, double x[], double fvec[], double xtol, Integer maxfev, Integer ml, Integer mu, double epsfcn, Nag_ScaleType scale_mode, double diag[], double factor, Integer nprint, Integer *nfev, double fjac[], double r[], double qtf[], Nag_Comm *comm, NagError *fail)

3  Description

The system of equations is defined as:
fi x1,x2,,xn = 0 ,   ​ i= 1, 2, , n .  
nag_zero_nonlin_eqns_expert (c05qcc) is based on the MINPACK routine HYBRD (see Moré et al. (1980)). It chooses the correction at each step as a convex combination of the Newton and scaled gradient directions. The Jacobian is updated by the rank-1 method of Broyden. At the starting point, the Jacobian is approximated by forward differences, but these are not used again until the rank-1 method fails to produce satisfactory progress. For more details see Powell (1970).

4  References

Moré J J, Garbow B S and Hillstrom K E (1980) User guide for MINPACK-1 Technical Report ANL-80-74 Argonne National Laboratory
Powell M J D (1970) A hybrid method for nonlinear algebraic equations Numerical Methods for Nonlinear Algebraic Equations (ed P Rabinowitz) Gordon and Breach

5  Arguments

1:     fcn function, supplied by the userExternal Function
fcn must return the values of the functions fi  at a point x, unless iflag=0 on entry to nag_zero_nonlin_eqns_expert (c05qcc).
The specification of fcn is:
void  fcn (Integer n, const double x[], double fvec[], Nag_Comm *comm, Integer *iflag)
1:     n IntegerInput
On entry: n, the number of equations.
2:     x[n] const doubleInput
On entry: the components of the point x at which the functions must be evaluated.
3:     fvec[n] doubleInput/Output
On entry: if iflag=0 , fvec contains the function values fix  and must not be changed.
On exit: if iflag>0  on entry, fvec must contain the function values fix  (unless iflag is set to a negative value by fcn).
4:     comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to fcn.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling nag_zero_nonlin_eqns_expert (c05qcc) you may allocate memory and initialize these pointers with various quantities for use by fcn when called from nag_zero_nonlin_eqns_expert (c05qcc) (see Section 2.3.1.1 in How to Use the NAG Library and its Documentation).
5:     iflag Integer *Input/Output
On entry: iflag0 .
iflag=0
x and fvec are available for printing (see nprint).
iflag>0
fvec must be updated.
On exit: in general, iflag should not be reset by fcn. If, however, you wish to terminate execution (perhaps because some illegal point x has been reached), then iflag should be set to a negative integer.
2:     n IntegerInput
On entry: n, the number of equations.
Constraint: n>0 .
3:     x[n] doubleInput/Output
On entry: an initial guess at the solution vector.
On exit: the final estimate of the solution vector.
4:     fvec[n] doubleOutput
On exit: the function values at the final point returned in x.
5:     xtol doubleInput
On entry: the accuracy in x to which the solution is required.
Suggested value: ε, where ε is the machine precision returned by nag_machine_precision (X02AJC).
Constraint: xtol0.0 .
6:     maxfev IntegerInput
On entry: the maximum number of calls to fcn with iflag0 . nag_zero_nonlin_eqns_expert (c05qcc) will exit with fail.code= NE_TOO_MANY_FEVALS, if, at the end of an iteration, the number of calls to fcn exceeds maxfev.
Suggested value: maxfev=200×n+1 .
Constraint: maxfev>0 .
7:     ml IntegerInput
On entry: the number of subdiagonals within the band of the Jacobian matrix. (If the Jacobian is not banded, or you are unsure, set ml=n-1 .)
Constraint: ml0 .
8:     mu IntegerInput
On entry: the number of superdiagonals within the band of the Jacobian matrix. (If the Jacobian is not banded, or you are unsure, set mu=n-1 .)
Constraint: mu0 .
9:     epsfcn doubleInput
On entry: a rough estimate of the largest relative error in the functions. It is used in determining a suitable step for a forward difference approximation to the Jacobian. If epsfcn is less than machine precision (returned by nag_machine_precision (X02AJC)) then machine precision is used. Consequently a value of 0.0 will often be suitable.
Suggested value: epsfcn=0.0 .
10:   scale_mode Nag_ScaleTypeInput
On entry: indicates whether or not you have provided scaling factors in diag.
If scale_mode=Nag_ScaleProvided the scaling must have been specified in diag.
Otherwise, if scale_mode=Nag_NoScaleProvided, the variables will be scaled internally.
Constraint: scale_mode=Nag_NoScaleProvided or Nag_ScaleProvided.
11:   diag[n] doubleInput/Output
On entry: if scale_mode=Nag_ScaleProvided, diag must contain multiplicative scale factors for the variables.
If scale_mode=Nag_NoScaleProvided, diag need not be set.
Constraint: if scale_mode=Nag_ScaleProvided, diag[i-1]>0.0 , for i=1,2,,n.
On exit: the scale factors actually used (computed internally if scale_mode=Nag_NoScaleProvided).
12:   factor doubleInput
On entry: a quantity to be used in determining the initial step bound. In most cases, factor should lie between 0.1 and 100.0. (The step bound is factor×diag×x2  if this is nonzero; otherwise the bound is factor.)
Suggested value: factor=100.0 .
Constraint: factor>0.0 .
13:   nprint IntegerInput
On entry: indicates whether (and how often) special calls to fcn, with iflag set to 0, are to be made for printing purposes.
nprint0
No calls are made.
nprint>0
fcn is called at the beginning of the first iteration, every nprint iterations thereafter and immediately before the return from nag_zero_nonlin_eqns_expert (c05qcc).
14:   nfev Integer *Output
On exit: the number of calls made to fcn with iflag>0.
15:   fjac[n×n] doubleOutput
Note: the i,jth element of the matrix is stored in fjac[j-1×n+i-1].
On exit: the orthogonal matrix Q produced by the QR  factorization of the final approximate Jacobian.
16:   r[n×n+1/2] doubleOutput
On exit: the upper triangular matrix R produced by the QR  factorization of the final approximate Jacobian, stored row-wise.
17:   qtf[n] doubleOutput
On exit: the vector QTf .
18:   comm Nag_Comm *
The NAG communication argument (see Section 2.3.1.1 in How to Use the NAG Library and its Documentation).
19:   fail NagError *Input/Output
The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_DIAG_ELEMENTS
On entry, scale_mode=Nag_ScaleProvided and diag contained a non-positive element.
NE_INT
On entry, maxfev=value.
Constraint: maxfev>0.
On entry, ml=value.
Constraint: ml0.
On entry, mu=value.
Constraint: mu0.
On entry, n=value.
Constraint: n>0 .
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_IMPROVEMENT
The iteration is not making good progress, as measured by the improvement from the last value iterations.
The iteration is not making good progress, as measured by the improvement from the last value Jacobian evaluations.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_REAL
On entry, factor=value.
Constraint: factor>0.0.
On entry, xtol=value.
Constraint: xtol0.0.
NE_TOO_MANY_FEVALS
There have been at least maxfev calls to fcn: maxfev=value. Consider restarting the calculation from the final point held in x.
NE_TOO_SMALL
No further improvement in the solution is possible. xtol is too small: xtol=value.
NE_USER_STOP
iflag was set negative in fcn. iflag=value.

7  Accuracy

If x^  is the true solution and D denotes the diagonal matrix whose entries are defined by the array diag, then nag_zero_nonlin_eqns_expert (c05qcc) tries to ensure that
D x-x^ 2 xtol × D x^ 2 .  
If this condition is satisfied with xtol = 10-k , then the larger components of Dx  have k significant decimal digits. There is a danger that the smaller components of Dx  may have large relative errors, but the fast rate of convergence of nag_zero_nonlin_eqns_expert (c05qcc) usually obviates this possibility.
If xtol is less than machine precision and the above test is satisfied with the machine precision in place of xtol, then the function exits with fail.code= NE_TOO_SMALL.
Note:  this convergence test is based purely on relative error, and may not indicate convergence if the solution is very close to the origin.
The convergence test assumes that the functions are reasonably well behaved. If this condition is not satisfied, then nag_zero_nonlin_eqns_expert (c05qcc) may incorrectly indicate convergence. The validity of the answer can be checked, for example, by rerunning nag_zero_nonlin_eqns_expert (c05qcc) with a lower value for xtol.

8  Parallelism and Performance

nag_zero_nonlin_eqns_expert (c05qcc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_zero_nonlin_eqns_expert (c05qcc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

Local workspace arrays of fixed lengths are allocated internally by nag_zero_nonlin_eqns_expert (c05qcc). The total size of these arrays amounts to 4×n double elements.
The time required by nag_zero_nonlin_eqns_expert (c05qcc) to solve a given problem depends on n, the behaviour of the functions, the accuracy requested and the starting point. The number of arithmetic operations executed by nag_zero_nonlin_eqns_expert (c05qcc) to process each evaluation of the functions is approximately 11.5×n2 . The timing of nag_zero_nonlin_eqns_expert (c05qcc) is strongly influenced by the time spent evaluating the functions.
Ideally the problem should be scaled so that, at the solution, the function values are of comparable magnitude.
The number of function evaluations required to evaluate the Jacobian may be reduced if you can specify ml and mu accurately.

10  Example

This example determines the values x1 , , x9  which satisfy the tridiagonal equations:
3-2x1x1-2x2 = -1, -xi-1+3-2xixi-2xi+1 = -1,  i=2,3,,8 -x8+3-2x9x9 = -1.  

10.1  Program Text

Program Text (c05qcce.c)

10.2  Program Data

None.

10.3  Program Results

Program Results (c05qcce.r)


nag_zero_nonlin_eqns_expert (c05qcc) (PDF version)
c05 Chapter Contents
c05 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2016