nag_glm_normal (g02gac) (PDF version)
g02 Chapter Contents
g02 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_glm_normal (g02gac)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_glm_normal (g02gac) fits a generalized linear model with normal errors.

2  Specification

#include <nag.h>
#include <nagg02.h>
void  nag_glm_normal (Nag_Link link, Nag_IncludeMean mean, Integer n, const double x[], Integer tdx, Integer m, const Integer sx[], Integer ip, const double y[], const double wt[], const double offset[], double *scale, double ex_power, double *rss, double *df, double b[], Integer *rank, double se[], double cov[], double v[], Integer tdv, double tol, Integer max_iter, Integer print_iter, const char *outfile, double eps, NagError *fail)

3  Description

A generalized linear model with Normal errors consists of the following elements:
(a) a set of n  observations, y i , from a Normal distribution with probability density function:
1 2π σ exp - y-μ 2 2 σ 2 ,  
where μ  is the mean and σ 2  is the variance.
(b) X , a set of p  independent variables for each observation, x 1 , x 2 , , x p .
(c) a linear model:
η = β j x j .  
(d)
a link between the linear predictor, η , and the mean of the distribution, μ , i.e., η = g μ . The possible link functions are:
(i) exponent link: η = μ a , for a constant a ,
(ii) identity link: η=μ ,
(iii) log link: η = logμ ,
(iv) square root link: η = μ ,
(v) reciprocal link: η = 1 μ .
(e) a measure of fit, the residual sum of squares = y i - μ ^ i 2
The linear arguments are estimated by iterative weighted least squares. An adjusted dependent variable, z , is formed:
z = η + y-μ dη dμ  
and a working weight, w ,
w = dη dμ 2 .  
At each iteration an approximation to the estimate of β , β ^ , is found by the weighted least squares regression of z  on X  with weights w .
nag_glm_normal (g02gac) finds a QR  decomposition of w 1 2 X , i.e.,
If R  is of full rank, then β ^  is the solution to:
R β ^ = QT w 1 2 z  
If R  is not of full rank a solution is obtained by means of a singular value decomposition (SVD) of R .
R = Q * D 0 0 0 PT ,  
where D is a k  by k  diagonal matrix with nonzero diagonal elements, k  being the rank of R  and w 1 2 X .
This gives the solution
β ^ = P 1 D -1 Q * 0 0 I QT w 1 2 z  
P 1  being the first k  columns of P , i.e., P = P 1 P 0 .
The iterations are continued until there is only a small change in the residual sum of squares.
The initial values for the algorithm are obtained by taking
η ^ = g y  
The fit of the model can be assessed by examining and testing the residual sum of squares, in particular comparing the difference in residual sums of squares between nested models, i.e., when one model is a sub-model of the other.
Let RSS f  be the residual sum of squares for the full model with degrees of freedom ν f  and let RSS s  be the residual sum of squares for the sub-model with degrees of freedom ν s  then:
F = RSS s - RSS f / ν s - ν f RSS f / ν f ,  
has, approximately, a F -distribution with ν s - ν f , ν f  degrees of freedom.
The parameter estimates, β ^ , are asymptotically Normally distributed with variance-covariance matrix:
The residuals and influence statistics can also be examined.
The estimated linear predictor η ^ = X β ^ , can be written as Hw 1 2 z  for an n  by n  matrix H . The i th diagonal elements of H , h i , give a measure of the influence of the i th values of the independent variables on the fitted regression model. These are sometimes known as leverages.
The fitted values are given by μ ^ = g -1 η ^ .
nag_glm_normal (g02gac) also computes the residuals, r :
r i = y i - μ ^ i  
An option allows prior weights, ω i  to be used, this gives a model with:
σ i 2 = σ 2 ω i .  
In many linear regression models the first term is taken as a mean term or an intercept, i.e., x i,1 = 1 , for i=1,2,,n; this is provided as an option.
Often only some of the possible independent variables are included in a model, the facility to select variables to be included in the model is provided.
If part of the linear predictor can be represented by a variable with a known coefficient, then this can be included in the model by using an offset, o :
η = o + β j x j .  
If the model is not of full rank the solution given will be only one of the possible solutions. Other estimates be may be obtained by applying constraints to the arguments. These solutions can be obtained by using nag_glm_tran_model (g02gkc) after using nag_glm_normal (g02gac). Only certain linear combinations of the arguments will have unique estimates; these are known as estimable functions and can be estimated and tested using nag_glm_est_func (g02gnc).
Details of the SVD, are made available, in the form of the matrix P * :
P * = D -1 P1T P0T .  

4  References

Cook R D and Weisberg S (1982) Residuals and Influence in Regression Chapman and Hall
McCullagh P and Nelder J A (1983) Generalized Linear Models Chapman and Hall

5  Arguments

On entry: indicates which link function is to be used.
link=Nag_Expo
An exponent link is used.
link=Nag_Iden
An identity link is used. You are advised not to use nag_glm_normal (g02gac) with an identity link as nag_regsn_mult_linear (g02dac) provides a more efficient way of fitting such a model.
link=Nag_Log
A log link is used.
link=Nag_Sqrt
A square root link is used.
link=Nag_Reci
A reciprocal link is used.
Constraint: link=Nag_Expo, Nag_Iden, Nag_Log, Nag_Sqrt or Nag_Reci.
2:     mean Nag_IncludeMeanInput
On entry: indicates if a mean term is to be included.
mean=Nag_MeanInclude
A mean term, (intercept), will be included in the model.
mean=Nag_MeanZero
The model will pass through the origin, zero point.
Constraint: mean=Nag_MeanInclude or Nag_MeanZero.
3:     n IntegerInput
On entry: the number of observations, n .
Constraint: n2 .
4:     x[n×tdx] const doubleInput
On entry: x[i-1×tdx+j-1]  must contain the i th observation for the j th independent variable, for i=1,2,,n and j=1,2,,m.
5:     tdx IntegerInput
On entry: the stride separating matrix column elements in the array x.
Constraint: tdxm .
6:     m IntegerInput
On entry: the total number of independent variables.
Constraint: m1 .
7:     sx[m] const IntegerInput
On entry: indicates which independent variables are to be included in the model. If sx[j-1] > 0 , then the variable contained in the j th column of x is included in the regression model.
Constraints:
  • sx[j-1] 0 , for j=1,2,,m;
  • if mean=Nag_MeanInclude, then exactly ip-1 values of sx must be >0;
  • if mean=Nag_MeanZero, then exactly ip values of sx must be >0.
8:     ip IntegerInput
On entry: the number p  of independent variables in the model, including the mean or intercept if present.
Constraint: ip>0 .
9:     y[n] const doubleInput
On entry: observations on the dependent variable, y i , for i=1,2,,n.
10:   wt[n] const doubleInput
On entry: if weighted estimates are required, then wt must contain the weights to be used. Otherwise wt need not be defined and may be set to NULL.
If wt[i-1] = 0.0 , then the i th observation is not included in the model, in which case the effective number of observations is the number of observations with positive weights.
If wt is NULL, then the effective number of observations is n .
Constraint: wtisNULL or wt[i-1] 0.0 , for i=1,2,,n.
11:   offset[n] const doubleInput
On entry: if an offset is required then offset must contain the values of the offset o . Otherwise offset must be supplied as NULL.
12:   scale double *Input/Output
On entry: indicates the scale argument for the model, σ 2 . If scale=0.0 , then the scale argument is estimated using the residual mean square.
On exit: if on input scale=0.0 , then scale contains the estimated value of the scale argument, σ ^ 2 . If on input scale0.0 , then scale is unchanged on exit.
Constraint: scale0.0 .
13:   ex_power doubleInput
On entry: if link=Nag_Expo then ex_power must contain the power a  of the exponential.
If linkNag_Expo, ex_power is not referenced.
Constraint: If link=Nag_Expo, ex_power0.0 .
14:   rss double *Output
On exit: the residual sum of squares for the fitted model.
15:   df double *Output
On exit: the degrees of freedom associated with the residual sum of squares for the fitted model.
16:   b[ip] doubleOutput
On exit: b[i-1] , i=1,2,,ip  contains the estimates of the arguments of the generalized linear model, β ^ .
If mean=Nag_MeanInclude, then b[0]  will contain the estimate of the mean argument and b[i]  will contain the coefficient of the variable contained in column j  of x, where sx[j-1]  is the i th positive value in the array sx.
If mean=Nag_MeanZero, then b[i-1]  will contain the coefficient of the variable contained in column j  of x, where sx[j-1]  is the i th positive value in the array sx.
17:   rank Integer *Output
On exit: the rank of the independent variables.
If the model is of full rank, then rank=ip .
If the model is not of full rank, then rank is an estimate of the rank of the independent variables. rank is calculated as the number of singular values greater than eps ×  (largest singular value). It is possible for the SVD to be carried out but rank to be returned as ip.
18:   se[ip] doubleOutput
On exit: the standard errors of the linear arguments.
se[i-1]  contains the standard error of the parameter estimate in b[i-1]  , for i=1,2,,ip.
19:   cov[ip×ip+1/2] doubleOutput
On exit: the ip × ip+1 / 2  elements of cov contain the upper triangular part of the variance-covariance matrix of the ip parameter estimates given in b. They are stored packed by column, i.e., the covariance between the parameter estimate given in b[i]  and the parameter estimate given in b[j] , ji , is stored in cov[ j j+1 / 2 + i ] , for i=0,1,,ip - 1 and j=i,,ip - 1.
20:   v[n×tdv] doubleOutput
On exit: auxiliary information on the fitted model.
v[i-1×tdv] , contains the linear predictor value, η i , for i=1,2,,n.
v[i-1×tdv+1] , contains the fitted value, μ ^ i , for i=1,2,,n.
v[i-1×tdv+2] , is only included for consistency with other functions. v[i-1×tdv+2] = 1.0 , for i=1,2,,n.
v[i-1×tdv+3] , contains the working weight, w i , for i=1,2,,n.
v[i-1×tdv+4] , contains the standardized residual, r i , for i=1,2,,n.
v[i-1×tdv+5] , contains the leverage, h i , for i=1,2,,n.
v[i-1×tdv+j-1] , for j=7,8,,ip + 6, contains the results of the QR  decomposition or the singular value decomposition.
If the model is not of full rank, i.e., rank<ip , then the first ip rows of columns 7  to ip+6  contain the P *  matrix.
21:   tdv IntegerInput
On entry: the stride separating matrix column elements in the array v.
Constraint: tdv ip + 6 .
22:   tol doubleInput
On entry: indicates the accuracy required for the fit of the model.
The iterative weighted least squares procedure is deemed to have converged if the absolute change in deviance between interactions is less than tol ×  (1.0+current residual sum of squares). This is approximately an absolute precision if the residual sum of squares is small and a relative precision if the residual sum of squares is large.
If 0.0 tol <  machine precision, then the function will use 10 ×  machine precision.
Constraint: tol0.0 .
23:   max_iter IntegerInput
On entry: the maximum number of iterations for the iterative weighted least squares. If max_iter=0 , then a default value of 10 is used.
Constraint: max_iter0 .
On entry: indicates if the printing of information on the iterations is required and the rate at which printing is produced. The following values are available:
print_iter0
There is no printing.
print_iter>0
The following items are printed every print_iter iterations:
(i) the deviance,
(ii) the current estimates, and
(iii) if the weighted least squares equations are singular then this is indicated.
25:   outfile const char *Input
On entry: a null terminated character string giving the name of the file to which results should be printed. If outfile is NULL or an empty string then the stdout stream is used. Note that the file will be opened in the append mode.
26:   eps doubleInput
On entry: the value of eps is used to decide if the independent variables are of full rank and, if not, what the rank of the independent variables is. The smaller the value of eps the stricter the criterion for selecting the singular value decomposition.
If 0.0 eps <  machine precision, then the function will use machine precision instead.
Constraint: eps0.0 .
27:   fail NagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_2_INT_ARG_LT
On entry, tdv=value  while ip=value . These arguments must satisfy tdv ip + 6 .
On entry, tdx=value  while m=value . These arguments must satisfy tdxm .
NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_BAD_PARAM
On entry, argument link had an illegal value.
On entry, argument mean had an illegal value.
NE_INT_ARG_LT
On entry, ip=value.
Constraint: ip1.
On entry, m=value.
Constraint: m1.
On entry, max_iter must not be less than 0: max_iter=value .
On entry, n=value.
Constraint: n2.
On entry, sx[value] must not be less than 0: sx[value] = value.
NE_IP_GT_OBSERV
Argument ip is greater than the effective number of observations.
NE_IP_INCOMP_SX
Argument ip is incompatible with arguments mean and sx.
NE_LSQ_ITER_NOT_CONV
The iterative weighted least squares has failed to converge in max_iter=value  iterations. The value of max_iter could be increased but it may be advantageous to examine the convergence using the print_iter option. This may indicate that the convergence is slow because the solution is at a boundary in which case it may be better to reformulate the model.
NE_NOT_APPEND_FILE
Cannot open file string  for appending.
NE_NOT_CLOSE_FILE
Cannot close file string .
NE_RANK_CHANGED
The rank of the model has changed during the weighted least squares iterations. The estimate for β  returned may be reasonable, but you should check how the deviance has changed during iterations.
NE_REAL_ARG_LT
On entry, eps must not be less than 0.0: eps=value .
On entry, scale must not be less than 0.0: scale=value .
On entry, tol must not be less than 0.0: tol=value .
On entry, wt[value] must not be less than 0.0: wt[value] = value.
NE_REAL_ENUM_ARG_CONS
On entry, ex_power=0.0 , link=Nag_Expo. These arguments must satisfy link=Nag_Expo and ex_power0.0 .
NE_SVD_NOT_CONV
The singular value decomposition has failed to converge.
NE_VALUE_AT_BOUNDARY_A
A fitted value is at a boundary. This will only occur with link=Nag_Expo, Nag_Log or Nag_Reci. This may occur if there are small values of y  and the model is not suitable for the data. The model should be reformulated with, perhaps, some observations dropped.
NE_ZERO_DOF_ERROR
The degrees of freedom for error are 0. A saturated model has been fitted.

7  Accuracy

The accuracy is determined by tol as described in Section 5. As the residual sum of squares is a function of μ 2  the accuracy of the β ^ 's will depend on the link used and may be of the order tol .

8  Parallelism and Performance

Not applicable.

9  Further Comments

None.

10  Example

The model:
y = 1 β 1 + β 2 x + ε  
for a sample of five observations.

10.1  Program Text

Program Text (g02gace.c)

10.2  Program Data

Program Data (g02gace.d)

10.3  Program Results

Program Results (g02gace.r)


nag_glm_normal (g02gac) (PDF version)
g02 Chapter Contents
g02 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015