nag_dsyrk (f16ypc) (PDF version)
f16 Chapter Contents
f16 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_dsyrk (f16ypc)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_dsyrk (f16ypc) performs a rank-k update on a real symmetric matrix.

2  Specification

#include <nag.h>
#include <nagf16.h>
void  nag_dsyrk (Nag_OrderType order, Nag_UploType uplo, Nag_TransType trans, Integer n, Integer k, double alpha, const double a[], Integer pda, double beta, double c[], Integer pdc, NagError *fail)

3  Description

nag_dsyrk (f16ypc) performs one of the symmetric rank-k update operations
CαAAT + βC   or   CαATA + βC ,  
where A is a real matrix, C is an n by n real symmetric matrix, and α and β are real scalars.

4  References

Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001) Basic Linear Algebra Subprograms Technical (BLAST) Forum Standard University of Tennessee, Knoxville, Tennessee http://www.netlib.org/blas/blast-forum/blas-report.pdf

5  Arguments

1:     order Nag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2:     uplo Nag_UploTypeInput
On entry: specifies whether the upper or lower triangular part of C is stored.
uplo=Nag_Upper
The upper triangular part of C is stored.
uplo=Nag_Lower
The lower triangular part of C is stored.
Constraint: uplo=Nag_Upper or Nag_Lower.
3:     trans Nag_TransTypeInput
On entry: specifies the operation to be performed.
trans=Nag_NoTrans
CαAAT+βC.
trans=Nag_Trans or Nag_ConjTrans
CαATA+βC.
Constraint: trans=Nag_NoTrans, Nag_Trans or Nag_ConjTrans.
4:     n IntegerInput
On entry: n, the order of the matrix C; the number of rows of A if trans=Nag_NoTrans, or the number of columns of A otherwise.
Constraint: n0.
5:     k IntegerInput
On entry: k, the number of columns of A if trans=Nag_NoTrans, or the number of rows of A otherwise.
Constraint: k0.
6:     alpha doubleInput
On entry: the scalar α.
7:     a[dim] const doubleInput
Note: the dimension, dim, of the array a must be at least
  • max1,pda×k when trans=Nag_NoTrans and order=Nag_ColMajor;
  • max1,n×pda when trans=Nag_NoTrans and order=Nag_RowMajor;
  • max1,pda×n when trans=Nag_Trans or Nag_ConjTrans and order=Nag_ColMajor;
  • max1,k×pda when trans=Nag_Trans or Nag_ConjTrans and order=Nag_RowMajor.
If order=Nag_ColMajor, Aij is stored in a[j-1×pda+i-1].
If order=Nag_RowMajor, Aij is stored in a[i-1×pda+j-1].
On entry: the matrix A; A is n by k if trans=Nag_NoTrans, or k by n otherwise.
8:     pda IntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraints:
  • if order=Nag_ColMajor,
    • if trans=Nag_NoTrans, pda max1,n ;
    • if trans=Nag_Trans or Nag_ConjTrans, pda max1,k ;
  • if order=Nag_RowMajor,
    • if trans=Nag_NoTrans, pdamax1,k;
    • if trans=Nag_Trans or Nag_ConjTrans, pdamax1,n.
9:     beta doubleInput
On entry: the scalar β.
10:   c[dim] doubleInput/Output
Note: the dimension, dim, of the array c must be at least max1,pdc×n.
On entry: the n by n symmetric matrix C.
If order=Nag_ColMajor, Cij is stored in c[j-1×pdc+i-1].
If order=Nag_RowMajor, Cij is stored in c[i-1×pdc+j-1].
If uplo=Nag_Upper, the upper triangular part of C must be stored and the elements of the array below the diagonal are not referenced.
If uplo=Nag_Lower, the lower triangular part of C must be stored and the elements of the array above the diagonal are not referenced.
On exit: the updated matrix C.
11:   pdc IntegerInput
On entry: the stride separating row or column elements (depending on the value of order) of the matrix C in the array c.
Constraint: pdcmax1,n.
12:   fail NagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.2.1.2 in the Essential Introduction for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_ENUM_INT_2
On entry, trans=value, k=value, pda=value.
Constraint: if trans=Nag_NoTrans, pdamax1,k.
On entry, trans=value, k=value, pda=value.
Constraint: if trans=Nag_Trans or Nag_ConjTrans, pda max1,k .
On entry, trans=value, n=value, pda=value.
Constraint: if trans=Nag_NoTrans, pda max1,n .
On entry, trans=value, n=value, pda=value.
Constraint: if trans=Nag_Trans or Nag_ConjTrans, pdamax1,n.
NE_INT
On entry, k=value.
Constraint: k0.
On entry, n=value.
Constraint: n0.
NE_INT_2
On entry, pdc=value, n=value.
Constraint: pdcmax1,n.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 3.6.6 in the Essential Introduction for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 3.6.5 in the Essential Introduction for further information.

7  Accuracy

The BLAS standard requires accurate implementations which avoid unnecessary over/underflow (see Section 2.7 of Basic Linear Algebra Subprograms Technical (BLAST) Forum (2001)).

8  Parallelism and Performance

Not applicable.

9  Further Comments

None.

10  Example

Perform rank-k update of real symmetric 4 by 4 matrix C using 4 by 2 matrix A (k=2), C=C-AAT, where
C = 4.30 -3.96 0.40 -0.27 -3.96 -4.87 0.31 0.07 0.40 0.31 -8.02 -5.95 -0.27 0.07 -5.95 0.12  
and
A = -3.0 -5.0 -1.0 1.0 2.0 -1.0 1.0 6.0 .  

10.1  Program Text

Program Text (f16ypce.c)

10.2  Program Data

Program Data (f16ypce.d)

10.3  Program Results

Program Results (f16ypce.r)


nag_dsyrk (f16ypc) (PDF version)
f16 Chapter Contents
f16 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015