nag_dsyevd (f08fcc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_dsyevd (f08fcc)

+ Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_dsyevd (f08fcc) computes all the eigenvalues and, optionally, all the eigenvectors of a real symmetric matrix. If the eigenvectors are requested, then it uses a divide-and-conquer algorithm to compute eigenvalues and eigenvectors. However, if only eigenvalues are required, then it uses the Pal–Walker–Kahan variant of the QL or QR algorithm.

2  Specification

#include <nag.h>
#include <nagf08.h>
void  nag_dsyevd (Nag_OrderType order, Nag_JobType job, Nag_UploType uplo, Integer n, double a[], Integer pda, double w[], NagError *fail)

3  Description

nag_dsyevd (f08fcc) computes all the eigenvalues and, optionally, all the eigenvectors of a real symmetric matrix A. In other words, it can compute the spectral factorization of A as
A=ZΛZT,
where Λ is a diagonal matrix whose diagonal elements are the eigenvalues λi, and Z is the orthogonal matrix whose columns are the eigenvectors zi. Thus
Azi=λizi,  i=1,2,,n.

4  References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia http://www.netlib.org/lapack/lug
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5  Arguments

1:     orderNag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2:     jobNag_JobTypeInput
On entry: indicates whether eigenvectors are computed.
job=Nag_DoNothing
Only eigenvalues are computed.
job=Nag_EigVecs
Eigenvalues and eigenvectors are computed.
Constraint: job=Nag_DoNothing or Nag_EigVecs.
3:     uploNag_UploTypeInput
On entry: indicates whether the upper or lower triangular part of A is stored.
uplo=Nag_Upper
The upper triangular part of A is stored.
uplo=Nag_Lower
The lower triangular part of A is stored.
Constraint: uplo=Nag_Upper or Nag_Lower.
4:     nIntegerInput
On entry: n, the order of the matrix A.
Constraint: n0.
5:     a[dim]doubleInput/Output
Note: the dimension, dim, of the array a must be at least max1,pda×n.
On entry: the n by n symmetric matrix A.
If order=Nag_ColMajor, Aij is stored in a[j-1×pda+i-1].
If order=Nag_RowMajor, Aij is stored in a[i-1×pda+j-1].
If uplo=Nag_Upper, the upper triangular part of A must be stored and the elements of the array below the diagonal are not referenced.
If uplo=Nag_Lower, the lower triangular part of A must be stored and the elements of the array above the diagonal are not referenced.
On exit: if job=Nag_EigVecs, a is overwritten by the orthogonal matrix Z which contains the eigenvectors of A.
6:     pdaIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraint: pdamax1,n.
7:     w[dim]doubleOutput
Note: the dimension, dim, of the array w must be at least max1,n.
On exit: the eigenvalues of the matrix A in ascending order.
8:     failNagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_CONVERGENCE
If fail.errnum=value and job=Nag_DoNothing, the algorithm failed to converge; value elements of an intermediate tridiagonal form did not converge to zero; if fail.errnum=value and job=Nag_EigVecs, then the algorithm failed to compute an eigenvalue while working on the submatrix lying in rows and column value/n+1 through value mod n+1.
NE_INT
On entry, n=value.
Constraint: n0.
On entry, pda=value.
Constraint: pda>0.
NE_INT_2
On entry, pda=value and n=value.
Constraint: pdamax1,n.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

7  Accuracy

The computed eigenvalues and eigenvectors are exact for a nearby matrix A+E, where
E2 = Oε A2 ,
and ε is the machine precision. See Section 4.7 of Anderson et al. (1999) for further details.

8  Parallelism and Performance

nag_dsyevd (f08fcc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_dsyevd (f08fcc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

The complex analogue of this function is nag_zheevd (f08fqc).

10  Example

This example computes all the eigenvalues and eigenvectors of the symmetric matrix A, where
A = 1.0 2.0 3.0 4.0 2.0 2.0 3.0 4.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 .

10.1  Program Text

Program Text (f08fcce.c)

10.2  Program Data

Program Data (f08fcce.d)

10.3  Program Results

Program Results (f08fcce.r)


nag_dsyevd (f08fcc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2014