Integer type:  int32  int64  nag_int  show int32  show int32  show int64  show int64  show nag_int  show nag_int

Chapter Contents
Chapter Introduction
NAG Toolbox

# NAG Toolbox: nag_lapack_zhpcon (f07pu)

## Purpose

nag_lapack_zhpcon (f07pu) estimates the condition number of a complex Hermitian indefinite matrix A$A$, where A$A$ has been factorized by nag_lapack_zhptrf (f07pr), using packed storage.

## Syntax

[rcond, info] = f07pu(uplo, ap, ipiv, anorm, 'n', n)
[rcond, info] = nag_lapack_zhpcon(uplo, ap, ipiv, anorm, 'n', n)

## Description

nag_lapack_zhpcon (f07pu) estimates the condition number (in the 1$1$-norm) of a complex Hermitian indefinite matrix A$A$:
 κ1(A) = ‖A‖1‖A − 1‖1 . $κ1(A)=‖A‖1‖A-1‖1 .$
Since A$A$ is Hermitian, κ1(A) = κ(A) = AA1${\kappa }_{1}\left(A\right)={\kappa }_{\infty }\left(A\right)={‖A‖}_{\infty }{‖{A}^{-1}‖}_{\infty }$.
Because κ1(A)${\kappa }_{1}\left(A\right)$ is infinite if A$A$ is singular, the function actually returns an estimate of the reciprocal of κ1(A)${\kappa }_{1}\left(A\right)$.

## References

Higham N J (1988) FORTRAN codes for estimating the one-norm of a real or complex matrix, with applications to condition estimation ACM Trans. Math. Software 14 381–396

## Parameters

### Compulsory Input Parameters

1:     uplo – string (length ≥ 1)
Specifies how A$A$ has been factorized.
uplo = 'U'${\mathbf{uplo}}=\text{'U'}$
A = PUDUHPT$A=PUD{U}^{\mathrm{H}}{P}^{\mathrm{T}}$, where U$U$ is upper triangular.
uplo = 'L'${\mathbf{uplo}}=\text{'L'}$
A = PLDLHPT$A=PLD{L}^{\mathrm{H}}{P}^{\mathrm{T}}$, where L$L$ is lower triangular.
Constraint: uplo = 'U'${\mathbf{uplo}}=\text{'U'}$ or 'L'$\text{'L'}$.
2:     ap( : $:$) – complex array
Note: the dimension of the array ap must be at least max (1,n × (n + 1) / 2)$\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}×\left({\mathbf{n}}+1\right)/2\right)$.
The factorization of A$A$ stored in packed form, as returned by nag_lapack_zhptrf (f07pr).
3:     ipiv( : $:$) – int64int32nag_int array
Note: the dimension of the array ipiv must be at least max (1,n)$\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{n}}\right)$.
Details of the interchanges and the block structure of D$D$, as returned by nag_lapack_zhptrf (f07pr).
4:     anorm – double scalar
The 1$1$-norm of the original matrix A$A$, which may be computed by calling nag_blas_zlanhp (f06ud) with its parameter norm = '1'${\mathbf{norm}}=\text{'1'}$. anorm must be computed either before calling nag_lapack_zhptrf (f07pr) or else from a copy of the original matrix A$A$.
Constraint: anorm0.0${\mathbf{anorm}}\ge 0.0$.

### Optional Input Parameters

1:     n – int64int32nag_int scalar
Default: The dimension of the array ipiv.
n$n$, the order of the matrix A$A$.
Constraint: n0${\mathbf{n}}\ge 0$.

work

### Output Parameters

1:     rcond – double scalar
An estimate of the reciprocal of the condition number of A$A$. rcond is set to zero if exact singularity is detected or the estimate underflows. If rcond is less than machine precision, A$A$ is singular to working precision.
2:     info – int64int32nag_int scalar
info = 0${\mathbf{info}}=0$ unless the function detects an error (see Section [Error Indicators and Warnings]).

## Error Indicators and Warnings

info = i${\mathbf{info}}=-i$
If info = i${\mathbf{info}}=-i$, parameter i$i$ had an illegal value on entry. The parameters are numbered as follows:
1: uplo, 2: n, 3: ap, 4: ipiv, 5: anorm, 6: rcond, 7: work, 8: info.
It is possible that info refers to a parameter that is omitted from the MATLAB interface. This usually indicates that an error in one of the other input parameters has caused an incorrect value to be inferred.

## Accuracy

The computed estimate rcond is never less than the true value ρ$\rho$, and in practice is nearly always less than 10ρ$10\rho$, although examples can be constructed where rcond is much larger.

A call to nag_lapack_zhpcon (f07pu) involves solving a number of systems of linear equations of the form Ax = b$Ax=b$; the number is usually 5$5$ and never more than 11$11$. Each solution involves approximately 8n2$8{n}^{2}$ real floating point operations but takes considerably longer than a call to nag_lapack_zhptrs (f07ps) with one right-hand side, because extra care is taken to avoid overflow when A$A$ is approximately singular.
The real analogue of this function is nag_lapack_dspcon (f07pg).

## Example

```function nag_lapack_zhpcon_example
uplo = 'L';
ap = [-1.36;
3.91 - 1.5i;
0.3100287981271241 + 0.04333020743962702i;
-0.1518120207240102 + 0.3742958425613706i;
-1.84 + 0i;
0.5637050486508776 + 0.2850349501519716i;
0.339658279960361 + 0.03031451811355637i;
-5.417624387291579 + 0i;
0.2997244646075835 + 0.1578268372785777i;
-7.102809895801842 + 0i];
ipiv = [int64(-4);-4;3;4];
anorm = 14.6641984095488;
[rcond, info] = nag_lapack_zhpcon(uplo, ap, ipiv, anorm)
```
```

rcond =

0.1497

info =

0

```
```function f07pu_example
uplo = 'L';
ap = [-1.36;
3.91 - 1.5i;
0.3100287981271241 + 0.04333020743962702i;
-0.1518120207240102 + 0.3742958425613706i;
-1.84 + 0i;
0.5637050486508776 + 0.2850349501519716i;
0.339658279960361 + 0.03031451811355637i;
-5.417624387291579 + 0i;
0.2997244646075835 + 0.1578268372785777i;
-7.102809895801842 + 0i];
ipiv = [int64(-4);-4;3;4];
anorm = 14.6641984095488;
[rcond, info] = f07pu(uplo, ap, ipiv, anorm)
```
```

rcond =

0.1497

info =

0

```