nag_ztgsna (f08yyc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_ztgsna (f08yyc)

+ Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_ztgsna (f08yyc) estimates condition numbers for specified eigenvalues and/or eigenvectors of a complex matrix pair in generalized Schur form.

2  Specification

#include <nag.h>
#include <nagf08.h>
void  nag_ztgsna (Nag_OrderType order, Nag_JobType job, Nag_HowManyType how_many, const Nag_Boolean select[], Integer n, const Complex a[], Integer pda, const Complex b[], Integer pdb, const Complex vl[], Integer pdvl, const Complex vr[], Integer pdvr, double s[], double dif[], Integer mm, Integer *m, NagError *fail)

3  Description

nag_ztgsna (f08yyc) estimates condition numbers for specified eigenvalues and/or right eigenvectors of an n by n matrix pair S,T in generalized Schur form. The function actually returns estimates of the reciprocals of the condition numbers in order to avoid possible overflow.
The pair S,T are in generalized Schur form if S and T are upper triangular as returned, for example, by nag_zgges (f08xnc) or nag_zggesx (f08xpc), or nag_zhgeqz (f08xsc) with job=Nag_Schur. The diagonal elements define the generalized eigenvalues αi,βi, for i=1,2,,n, of the pair S,T and the eigenvalues are given by
λi = αi / βi ,
so that
βi S xi = αi T xi   or   S xi = λi T xi ,
where xi is the corresponding (right) eigenvector.
If S and T are the result of a generalized Schur factorization of a matrix pair A,B 
A = QSZH ,   B = QTZH
then the eigenvalues and condition numbers of the pair S,T are the same as those of the pair A,B.
Let α,β0,0 be a simple generalized eigenvalue of A,B. Then the reciprocal of the condition number of the eigenvalue λ=α/β is defined as
sλ= yHAx 2 + yHBx 2 1/2 x2 y2 ,
where x and y are the right and left eigenvectors of A,B corresponding to λ. If both α and β are zero, then A,B is singular and sλ=-1 is returned.
If U and V are unitary transformations such that
UH A,B V= S,T = α * 0 S22 β * 0 T22 ,
where S22 and T22 are n-1 by n-1 matrices, then the reciprocal condition number is given by
Difx Dify = Difα,β,S22,T22 = σmin Z ,
where σminZ denotes the smallest singular value of the 2n-1 by 2n-1 matrix
Z = αI -1S22 βI -1T22
and  is the Kronecker product.
See Sections 2.4.8 and 4.11 of Anderson et al. (1999) and Kågström and Poromaa (1996) for further details and information.

4  References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia http://www.netlib.org/lapack/lug
Kågström B and Poromaa P (1996) LAPACK-style algorithms and software for solving the generalized Sylvester equation and estimating the separation between regular matrix pairs ACM Trans. Math. Software 22 78–103

5  Arguments

1:     orderNag_OrderTypeInput
On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by order=Nag_RowMajor. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.
Constraint: order=Nag_RowMajor or Nag_ColMajor.
2:     jobNag_JobTypeInput
On entry: indicates whether condition numbers are required for eigenvalues and/or eigenvectors.
job=Nag_EigVals
Condition numbers for eigenvalues only are computed.
job=Nag_EigVecs
Condition numbers for eigenvectors only are computed.
job=Nag_DoBoth
Condition numbers for both eigenvalues and eigenvectors are computed.
Constraint: job=Nag_EigVals, Nag_EigVecs or Nag_DoBoth.
3:     how_manyNag_HowManyTypeInput
On entry: indicates how many condition numbers are to be computed.
how_many=Nag_ComputeAll
Condition numbers for all eigenpairs are computed.
how_many=Nag_ComputeSelected
Condition numbers for selected eigenpairs (as specified by select) are computed.
Constraint: how_many=Nag_ComputeAll or Nag_ComputeSelected.
4:     select[dim]const Nag_BooleanInput
Note: the dimension, dim, of the array select must be at least
  • n when how_many=Nag_ComputeSelected;
  • otherwise select may be NULL.
On entry: specifies the eigenpairs for which condition numbers are to be computed if how_many=Nag_ComputeSelected. To select condition numbers for the eigenpair corresponding to the eigenvalue λj, select[j-1] must be set to Nag_TRUE.
If how_many=Nag_ComputeAll, select is not referenced and may be NULL.
5:     nIntegerInput
On entry: n, the order of the matrix pair S,T.
Constraint: n0.
6:     a[dim]const ComplexInput
Note: the dimension, dim, of the array a must be at least pda×n.
The i,jth element of the matrix A is stored in
  • a[j-1×pda+i-1] when order=Nag_ColMajor;
  • a[i-1×pda+j-1] when order=Nag_RowMajor.
On entry: the upper triangular matrix S.
7:     pdaIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array a.
Constraint: pdan.
8:     b[dim]const ComplexInput
Note: the dimension, dim, of the array b must be at least pdb×n.
The i,jth element of the matrix B is stored in
  • b[j-1×pdb+i-1] when order=Nag_ColMajor;
  • b[i-1×pdb+j-1] when order=Nag_RowMajor.
On entry: the upper triangular matrix T.
9:     pdbIntegerInput
On entry: the stride separating row or column elements (depending on the value of order) in the array b.
Constraint: pdbn.
10:   vl[dim]const ComplexInput
Note: the dimension, dim, of the array vl must be at least
  • pdvl×mm when job=Nag_EigVals or Nag_DoBoth and order=Nag_ColMajor;
  • n×pdvl when job=Nag_EigVals or Nag_DoBoth and order=Nag_RowMajor;
  • otherwise vl may be NULL.
The ith element of the jth vector is stored in
  • vl[j-1×pdvl+i-1] when order=Nag_ColMajor;
  • vl[i-1×pdvl+j-1] when order=Nag_RowMajor.
On entry: if job=Nag_EigVals or Nag_DoBoth, vl must contain left eigenvectors of S,T, corresponding to the eigenpairs specified by how_many and select. The eigenvectors must be stored in consecutive columns of vl, as returned by nag_zggev (f08wnc) or nag_ztgevc (f08yxc).
If job=Nag_EigVecs, vl is not referenced and may be NULL.
11:   pdvlIntegerInput
On entry: the stride used in the array vl.
Constraints:
  • if order=Nag_ColMajor,
    • if job=Nag_EigVals or Nag_DoBoth, pdvl n ;
    • otherwise pdvl1;
  • if order=Nag_RowMajor,
    • if job=Nag_EigVals or Nag_DoBoth, pdvlmm;
    • otherwise vl may be NULL.
12:   vr[dim]const ComplexInput
Note: the dimension, dim, of the array vr must be at least
  • pdvr×mm when job=Nag_EigVals or Nag_DoBoth and order=Nag_ColMajor;
  • n×pdvr when job=Nag_EigVals or Nag_DoBoth and order=Nag_RowMajor;
  • otherwise vr may be NULL.
The ith element of the jth vector is stored in
  • vr[j-1×pdvr+i-1] when order=Nag_ColMajor;
  • vr[i-1×pdvr+j-1] when order=Nag_RowMajor.
On entry: if job=Nag_EigVals or Nag_DoBoth, vr must contain right eigenvectors of S,T, corresponding to the eigenpairs specified by how_many and select. The eigenvectors must be stored in consecutive columns of vr, as returned by nag_zggev (f08wnc) or nag_ztgevc (f08yxc).
If job=Nag_EigVecs, vr is not referenced and may be NULL.
13:   pdvrIntegerInput
On entry: the stride used in the array vr.
Constraints:
  • if order=Nag_ColMajor,
    • if job=Nag_EigVals or Nag_DoBoth, pdvr n ;
    • otherwise pdvr1;
  • if order=Nag_RowMajor,
    • if job=Nag_EigVals or Nag_DoBoth, pdvrmm;
    • otherwise vr may be NULL.
14:   s[dim]doubleOutput
Note: the dimension, dim, of the array s must be at least
  • mm when job=Nag_EigVals or Nag_DoBoth;
  • otherwise s may be NULL.
On exit: if job=Nag_EigVals or Nag_DoBoth, the reciprocal condition numbers of the selected eigenvalues, stored in consecutive elements of the array.
If job=Nag_EigVecs, s is not referenced and may be NULL.
15:   dif[dim]doubleOutput
Note: the dimension, dim, of the array dif must be at least
  • mm when job=Nag_EigVecs or Nag_DoBoth;
  • otherwise dif may be NULL.
On exit: if job=Nag_EigVecs or Nag_DoBoth, the estimated reciprocal condition numbers of the selected eigenvectors, stored in consecutive elements of the array. If the eigenvalues cannot be reordered to compute dif[j-1], dif[j-1] is set to 0; this can only occur when the true value would be very small anyway.
If job=Nag_EigVals, dif is not referenced and may be NULL.
16:   mmIntegerInput
On entry: the number of elements in the arrays s and dif.
Constraints:
  • if how_many=Nag_ComputeAll, mmn;
  • otherwise mm​ the number of selected eigenvalues.
17:   mInteger *Output
On exit: the number of elements of the arrays s and dif used to store the specified condition numbers; for each selected eigenvalue one element is used.
If how_many=Nag_ComputeAll, m is set to n.
18:   failNagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_ENUM_INT_2
On entry, job=value, pdvl=value, mm=value.
Constraint: if job=Nag_EigVals or Nag_DoBoth, pdvlmm.
On entry, job=value, pdvl=value and n=value.
Constraint: if job=Nag_EigVals or Nag_DoBoth, pdvl n .
On entry, job=value, pdvr=value, mm=value.
Constraint: if job=Nag_EigVals or Nag_DoBoth, pdvrmm.
On entry, job=value, pdvr=value and n=value.
Constraint: if job=Nag_EigVals or Nag_DoBoth, pdvr n .
NE_ENUM_INT_3
On entry, n=value, mm=value, how_many=value and m=value.
Constraint: if how_many=Nag_ComputeAll, mmn;
otherwise mm​ the number of selected eigenvalues.
NE_INT
On entry, n=value.
Constraint: n>0.
On entry, n=value.
Constraint: n0.
On entry, pda=value.
Constraint: pda>0.
On entry, pdb=value.
Constraint: pdb>0.
On entry, pdvl=value.
Constraint: pdvl>0.
On entry, pdvr=value.
Constraint: pdvr>0.
NE_INT_2
On entry, pda=value and n=value.
Constraint: pdan.
On entry, pdb=value and n=value.
Constraint: pdbn.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

7  Accuracy

None.

8  Parallelism and Performance

nag_ztgsna (f08yyc) is not threaded by NAG in any implementation.
nag_ztgsna (f08yyc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

An approximate asymptotic error bound on the chordal distance between the computed eigenvalue λ~ and the corresponding exact eigenvalue λ is
χλ~,λ εA,BF / Sλ
where ε is the machine precision.
An approximate asymptotic error bound for the right or left computed eigenvectors x~ or y~ corresponding to the right and left eigenvectors x and y is given by
θz~,z ε A,BF / Dif .
The real analogue of this function is nag_dtgsna (f08ylc).

10  Example

This example estimates condition numbers and approximate error estimates for all the eigenvalues and right eigenvectors of the pair S,T given by
S = 4.0+4.0i 1.0+1.0i 1.0+1.0i 2.0-1.0i 0.0i+0.0 2.0+1.0i 1.0+1.0i 1.0+1.0i 0.0i+0.0 0.0i+0.0 2.0-1.0i 1.0+1.0i 0.0i+0.0 0.0i+0.0 0.0i+0.0 6.0-2.0i
and
T = 2.0 1.0+1.0i 1.0+1.0i 3.0-1.0i 0.0 1.0i+0.0 2.0+1.0i 1.0+1.0i 0.0 0.0i+0.0 1.0i+0.0 1.0+1.0i 0.0 0.0i+0.0 0.0i+0.0 2.0i+0.0 .
The eigenvalues and eigenvectors are computed by calling nag_ztgevc (f08yxc).

10.1  Program Text

Program Text (f08yyce.c)

10.2  Program Data

Program Data (f08yyce.d)

10.3  Program Results

Program Results (f08yyce.r)


nag_ztgsna (f08yyc) (PDF version)
f08 Chapter Contents
f08 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2014