nag_ode_ivp_adams_setup (d02qwc) (PDF version)
d02 Chapter Contents
d02 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_ode_ivp_adams_setup (d02qwc)

+ Contents

    1  Purpose
    7  Accuracy
    10  Example

1  Purpose

nag_ode_ivp_adams_setup (d02qwc) is a setup function which must be called prior to the first call of the integration function nag_ode_ivp_adams_roots (d02qfc) and may be called prior to any subsequent continuation call of the integrator.

2  Specification

#include <nag.h>
#include <nagd02.h>
void  nag_ode_ivp_adams_setup (Nag_Start *state, Integer neqf, Nag_Boolean vectol, const double atol[], const double rtol[], Nag_Boolean one_step, Nag_Boolean crit, double tcrit, double hmax, Integer max_step, Integer neqg, Nag_Boolean *alter_g, Nag_Boolean sophist, Nag_ODE_Adams *opt, NagError *fail)

3  Description

nag_ode_ivp_adams_setup (d02qwc) permits initialization of the integration method and setting of integration inputs prior to any call of nag_ode_ivp_adams_roots (d02qfc).
It must be called before the first call of the function nag_ode_ivp_adams_roots (d02qfc) and it may be called before any continuation call of nag_ode_ivp_adams_roots (d02qfc).

4  References

None.

5  Arguments

1:     stateNag_Start *Input/Output
On entry: specifies whether the integration function nag_ode_ivp_adams_roots (d02qfc) is to start a new system of ordinary differential equations, restart a system or continue with a system.
state=Nag_NewStart
Start integration with a new differential system.
state=Nag_ReStart
Restart integration with the current differential system.
state=Nag_Continue
Continue integration with the current differential system.
Constraint: state=Nag_NewStart, Nag_ReStart or Nag_Continue.
On exit: state is set to Nag_Continue, except that if an error is detected, state is unchanged.
2:     neqfIntegerInput
On entry: the number of ordinary differential equations to be solved by the integration function. neqf must remain unchanged on subsequent calls to nag_ode_ivp_adams_setup (d02qwc) with state=Nag_Continue or Nag_ReStart.
Constraint: neqf1 .
3:     vectolNag_BooleanInput
On entry: specifies whether vector or scalar error control is to be employed for the local error test in the integration. If vectol=Nag_TRUE , then vector error control will be used and you must specify values of rtol[i]  and atol[i] , for i=0,1,,neqf - 1. Otherwise scalar error control will be used and you must specify values of just rtol[0]  and atol[0] .
The error test to be satisfied is of the form
i=1 neqf e i w i 2 1.0 ,
where w i  is defined as follows:
vectol w i
Nag_TRUE rtol i-1 × y i + atol[i-1]
Nag_FALSE rtol 0 × y i + atol[0]
and e i  is an estimate of the local error in y i , computed internally. vectol must remain unchanged on subsequent calls to nag_ode_ivp_adams_setup (d02qwc) with state=Nag_Continue or Nag_ReStart.
4:     atol[neqf]const doubleInput
On entry: the absolute local error tolerance (see vectol).
Constraint: atol[i] 0.0 .
5:     rtol[neqf]const doubleInput
On entry: the relative local error tolerance (see vectol).
Constraints:
  • rtol[i] 0.0 ;
  • if atol[i] = 0.0 , rtol[i] 4.0 × machine precision .
6:     one_stepNag_BooleanInput
On entry: the mode of operation of the integration function. If one_step=Nag_TRUE , the integration function will operate in one-step mode, that is it will return after each successful step. Otherwise the integration function will operate in interval mode, that is it will return at the end of the integration interval.
7:     critNag_BooleanInput
On entry: specifies whether or not there is a value for the independent variable beyond which integration is not to be attempted. Setting crit=Nag_TRUE  indicates that there is such a point, whereas crit=Nag_FALSE  indicates that there is no such restriction.
8:     tcritdoubleInput
On entry: with crit=Nag_TRUE , tcrit must be set to a value of the independent variable beyond which integration is not to be attempted. Otherwise tcrit is not referenced.
9:     hmaxdoubleInput
On entry:
hmax0.0
A bound on the absolute step size during the integration is taken to be hmax .
hmax=0.0
No bound is assumed on the step size during the integration.
A bound may be required if there are features of the solution on very short ranges of integration which may be missed. You should try hmax=0.0  first.
Note: this argument only affects the step size if the option crit=Nag_TRUE  is being used.
10:   max_stepIntegerInput
On entry: a bound on the number of attempted steps in any one call to the integration function.
If max_step0  on entry, a value of 1000 is used.
11:   neqgIntegerInput
On entry: specifies whether or not root-finding is required in nag_ode_ivp_adams_roots (d02qfc).
neqg0
No root-finding is attempted.
neqg>0
Root-finding is required and neqg event functions will be specified for the integration function.
12:   alter_gNag_Boolean *Input/Output
On entry: specifies whether or not the event functions have been redefined. alter_g need not be set if state=Nag_NewStart. On subsequent calls to nag_ode_ivp_adams_setup (d02qwc), if neqg has been set positive, then alter_g=Nag_FALSE  specifies that the event functions remain unchanged, whereas alter_g=Nag_TRUE  specifies that the event functions have changed. Because of the expense in reinitializing the root searching procedure, alter_g should be set to Nag_TRUE only if the event functions really have been altered. alter_g need not be set if the root-finding option is not used.
On exit: alter_g is set to Nag_FALSE, except that if an error is detected, alter_g is unchanged.
13:   sophistNag_BooleanInput
On entry: the type of search technique to be used in the root-finding.
sophist=Nag_TRUE
A sophisticated and reliable but expensive technique will be used, whereas for sophist=Nag_FALSE  a simple but less reliable technique will be used.
neqg0
sophist is not referenced.
14:   optNag_ODE_Adams *Output
On exit: the structure of type Nag_ODE_Adams will have been initialized to appropriate values for entry to the integration function nag_ode_ivp_adams_roots (d02qfc). opt must be passed unchanged to the integration function.
Memory will have been allocated by nag_ode_ivp_adams_setup (d02qwc) to several pointers within opt, this memory is used by the integration function nag_ode_ivp_adams_roots (d02qfc) and the interpolation function nag_ode_ivp_adams_interp (d02qzc). The library function nag_ode_ivp_adams_free (d02qyc) is provided so that this memory can be freed when all calls to nag_ode_ivp_adams_roots (d02qfc) and nag_ode_ivp_adams_interp (d02qzc) have been completed. A call to nag_ode_ivp_adams_free (d02qyc) may also be made prior to reentering nag_ode_ivp_adams_setup (d02qwc) with state=Nag_NewStart.
15:   failNagError *Input/Output
The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_BAD_PARAM
On entry, argument state had an illegal value.
NE_BOOL_NOT_SET
The Boolean argument crit has not been set to Nag_TRUE or Nag_FALSE.
NE_INT_ARG_LT
On entry, neqf=value.
Constraint: neqf1.
NE_NEQF_CHANGED
state = string  but neqf has been changed. neqf was value but is now value.
NE_NEQG_CHANGED
alter_g=Nag_FALSE  but neqg has been changed. neqg was value but is now value.
NE_REAL_ARG_LT
On entry, atol[value]  must not be less than 0.0: atol[value] = value.
On entry, rtol[value]  must not be less than 0.0: rtol[value] = value.
NE_REAL_LT_COND
When atol[value] = 0.0 , rtol[value]  must not be less than 4×ε . rtol[value] = value, 4 × ε = value.
NE_STATE
stateNag_NewStart on first call.
NE_VECTOL_CHANGED
state = string  but vectol has been changed. vectol was string  but is now string .

7  Accuracy

Not applicable.

8  Parallelism and Performance

Not applicable.

9  Further Comments

Prior to a continuation call of the integration function, you may reset some of the arguments by calling nag_ode_ivp_adams_setup (d02qwc) with state=Nag_Continue. You may reset:
(a) hmax - to alter the maximum step size selection;
(b) rtol, atol - to change the error requirements;
(c) max_step - to increase or decrease the number of attempted steps before an error exit is returned;
(d) one_step - to change the operation mode of the integration function;
(e) crit, tcrit - to alter the point beyond which integration must not be attempted; and
(f) neqg, alter_g, sophist - to alter the number and type of event functions, and also the search method.
If the behaviour of the system of differential equations has altered and you wish to restart the integration method from the value of t output from the integration function, then set state=Nag_ReStart and some of the integration arguments may be reset also. If you want to redefine the system of differential equations or start a new integration problem, then set state=Nag_NewStart. Resetting state=Nag_ReStart or Nag_NewStart on normal continuation calls causes a restart in the integration process, which is very inefficient when not needed.

10  Example

See example program for nag_ode_ivp_adams_roots (d02qfc).

nag_ode_ivp_adams_setup (d02qwc) (PDF version)
d02 Chapter Contents
d02 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2014