Your attention is drawn to the terms and conditions of the Software License Agreement (in file lic_agr.txt, see Section 3.1) regarding the use of NAG software. Requests for information about the availability of other implementations must be referred to NAG.
This implementation is a compiled, tested, ready-to-use version of the NAG Library for SMP & Multicore that is considered suitable for operation on the computer systems detailed below:
hardware: Intel IA32 systems and compatible operating system: Microsoft Windows XP/Vista/7 32-bit Fortran compiler: Intel(R) 32-bit Fortran Compiler version 12.1 and compatible (including ifort 10.1, 11.0 and 12.0) Vendor library: Intel MKL version 10.3
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: Intel(R) Core2 Quad CPU Q6600 2.40GHz operating system: Microsoft Windows Vista 32-bit Fortran compiler: Intel(R) Fortran Compiler ifort Version 12.1 Build 20110811 vendor library: Intel MKL version 10.3 compiler options: -iface:cvf -Qopenmp -threads -auto -MD -Qprec -fpp -align -Qfnalign:16
It has also been tested on the same system with other versions of the Intel compiler:
Intel(R) Visual Fortran Compiler ifort Version 11.1.065 Build 20100414 Package ID: w_cprof_p_11.1.065 Intel(R) Visual Fortran Compiler ifort Version 10.1.024 Build 20080602 Package ID: w_fc_p_10.1.024
It has also been tested on the same system with the NAG Fortran compiler:
NAG Fortran Compiler: Release 5.2(722)
N.B. for the tests with the Intel compiler version 10.1.024 and with the NAG compiler nagfor it was necessary to recompile the module files in nag_interface_blocks as described in Section 3.3 of the Users' Note, because the distributed module files are incompatible with these compiler versions. Also, with these compilers it is only possible to use the DLL version of the NAG Library unless you also have a later Intel compiler installed to get access to its static run-time libraries.
Each routine in the NAG Library for SMP & Multicore, Mark 23, was compiled with the highest level of optimization that enabled the functionality provided by the library to be verified and validated. Most routines in the library were compiled with optimization flags -O3 -QxSSE2; some routines will have been compiled with a lower level of optimization when necessary.
In this implementation:
for details of any new information related to the applicability or usage of this implementation.
|- doc -|- in.html (Installer's Note, (this document)) | |- un.html (Users' Note) | |- lic_agr.txt | |- bin -|- FSW3223DC.dll (DLL library) | |- kusari_key_gui.exe (Kusari license installer) | |- (plus other required run-time libraries) | |- lib -|- FSW3223DC_static.lib (static library) | |- FSW3223DC.lib (DLL import library) fsw3223dcl -| |- nag_interface_blocks -|- * (Interface blocks for Intel compiler) | |- nag_interface_blocks_nagfor -|- * (Interface blocks for NAG compiler) | | |- source --|- ??????e.f90 | | |- examples -|- data ----|- ??????e.d | | |- ??????e.opt | | | |- results -|- ??????e.r | |- samples -|- * | |- c_headers -|- nagmk23.h (C/C++ header file) | |- techdoc.html (C/C++ headers documentation) | |- vb6_headers -|- flvb6-*.bas (Declare info for VB6/VBA) | |- vb.net_headers -|- flvbdnet.vb (Declare info for VB.NET) | | |- envvars.bat |- batch -|- nagsmp_example_static.bat | |- nagsmp_example_dll.bat | |- diagnostics -|- NAG_Fortran_DLL_info.exe | |- MKL_ia32_10.3 --|- * (Intel Math Kernel Library 10.3) | | |- bin -|- * (directories of binaries | | for supported platforms) |- license -|- README.TXT | |- doc -|- * (End User Guide)
By default, fsw3223dcl is installed beneath the folder C:\Program Files\NAG\FS23\.
The following shows the folder and file organization of the Library Manual materials as they will be installed.
nagdoc_fl23 -|- index.html | |- examples -|- baseresults -|- ??????*.r | |- source -|- ??????*.f90 | |- data -|- ??????*.d | |- ??????*.opt | |- html -|- FRONTMATTER -|- manconts.html (main HTML index) | | |- *.html (foreword & copyright) | | | |- [A00-X05] -|- *conts.html (chapter contents) | | | |- GENINT -|- *.html (general introductory material) | | | |- INDEXES -|- GAMS -|- gams.html (GAMS index) | | | |- *.html (GAMS files) | | | | | |- KWIC -|- kwic.html (KWIC index) | | |- *.html (KWIC files) | | | |- styles -|- libdoc.css (main CSS stylesheet) | |- pdf -|- FRONTMATTER -|- manconts.pdf (NAG copyright and | | | main pdf page) | | |- foreword.pdf (NAG foreword) | | | |- [A00-X05] -|- *conts.pdf (chapter contents) | | |- *intro.pdf (chapter introduction) | | |- *f.pdf (routine documents) | | | |- GENINT -|- *.pdf (general introductory material) | | | |- INDEXES -|- *.pdf (bookmarked file containing links | | to kwic.xml and gams.xml) | | | |- INUNS -|- usersnote.pdf (implementation-specific | details) | |- xhtml -|- FRONTMATTER -|- manconts.xml (main XHTML index) | |- *.xml (foreword & copyright) | |- [A00-X05] -|- *conts.xml (chapter contents) | |- figures -|- *.png (figures and plotfiles) | |- GENINT -|- *.xml (general introductory material) | |- INDEXES -|- GAMS -|- gams.xml (GAMS index) | | |- *.xml (GAMS files) | | | |- KWIC -|- kwic.xml (KWIC index) | |- *.xml (KWIC files) | |- styles -|- libdoc.css (main CSS stylesheet) |- nagmathml.css (MathML stylesheets) |- pmathml.css
Library software: 500 MB Library Manual: 220 MBbut note that the actual disk space used on any particular machine is dependent on the hard disk allocation unit (cluster) size.
If you have the Library materials on CD, insert the CD into your CD drive to display the NAG CD browser. Click on the Install ... button and follow the instructions to install the Library and/or the manual. If the CD does not autorun, run
e:\NAG_Installation_browser.exeto run the browser, or run e:\fsw3223dcl_setup.exe to run the Library installation directly, where e is the drive letter for your CD drive.
If you have downloaded the Library materials from our website, run the self-extracting executable to start the Library installation. The Library manual materials are available as a separate download.
After installation, you should ensure that the software described in Section 3.1 is present and accessible.
The installation procedure will create a shortcut which starts a Command Prompt with the required local environment variables. The default location of this shortcut is in the Start Menu under
Start|All Programs|NAG|FS23|NAG Library for SMP and Multicore (FSW3223DCL) |FSW3223DCL Command PromptThe local environment variable NAG_FSW3223DCL is needed by the batch files nagsmp_example_static.bat and nagsmp_example_dll.bat (see Section 3.4 of the Users' Note (un.html)).
The NAG Library Interface Blocks define the type and arguments of each user callable NAG Library routine. These are not essential to calling the NAG Library from Fortran programs. Their purpose is to allow the Fortran compiler to check that NAG Library routines are called correctly.
The interface block files (nag_interface_blocks\*) are supplied in both source form and pre-compiled module form. (The source form is only required if the precompiled form is incompatible with the compiler in use.) The location of the interface block files is added to the local INCLUDE environment variable by running the batch file envvars.bat. It may also have been set globally as part of the installation procedure. This is needed so that the compiler can access the modules at the compilation stage.
The installation procedure also creates a shortcut on the Start Menu to the Users' Note, which by default is located under
Start|All Programs|NAG|FS23|NAG Library for SMP and Multicore (FSW3223DCL) |Users' NoteThere is also a shortcut to the diagnostic program NAG_Fortran_DLL_info.exe under
Start|All Programs|NAG|FS23|NAG Library for SMP and Multicore (FSW3223DCL) |Check NAG DLL Accessibility (FSW3223DCL)(see Section 4.2.3).
This software is provided with an uninstallation facility via
Control Panel|Add or Remove programs.on Windows XP and via
Control Panel|Programs|Programs and Features|Uninstall a Programon Windows Vista or Windows 7.
If you have the Library materials on CD, insert the CD into your CD drive to display the NAG CD browser. Click on the "Install Documentation" button and follow the instructions to install the manual. If the CD does not autorun, run
e:\NAG_Installation_browser.exeto run the browser, or run e:\setup_mk23_manual.exe to run the Library manual installation directly, where e is the drive letter for your CD drive.
If you have downloaded the Library manual materials from our website, run the self-extracting executable to start the Library manual installation.
Free copies of Adobe Acrobat Reader can be downloaded from http://www.adobe.com/. Please check this site for availability of a reader for your platform.
If you use Internet Explorer as your web browser, you will require Design Science's MathPlayer plug-in in order to display the MathML mathematical expressions correctly for the XHTML/MathML version of the manual. At the end of the Library Manual installation there is an option to install MathPlayer. Selecting this option runs the MathPlayer 2.0b installation, which will install the MathPlayer files (approximately 2.4 Mb) under
C:\Program Files\Design Science
MathPlayer may be removed via
Control Panel|Add or Remove Programson Windows XP, or via
Control Panel|Programs|Programs and Features|Uninstall a Programor
Control Panel|Programs and Features|Uninstall or change a programon Windows Vista or Windows 7 (depending on which view is displayed), but note that clicking on the Change/Remove button for MathPlayer will remove the MathPlayer files without asking for any confirmation.
MathPlayer may also be downloaded from Design Science's web site:
In order to enable the software, NAG will issue you with a license key. The license key is a simple text file containing details of the software that will be enabled. For evaluation purposes a trial license may be used. Before obtaining a full license you need to know the Kusari hostid of the system on which you intend to use this product. How to do this is described below.
The easiest way to request a license key is to use the Kusari Installer GUI described in the next section. Once you have a key, the same GUI can be used to install it.
The information below covers the most common requirements. For more
complex licensing situations, please see the Kusari documentation
To request a license key, run the Kusari Installer program, which may be accessed at the end of the installation procedure or via the Start Menu shortcut
Start|All Programs|NAG|FS23|NAG Library for SMP and Multicore (FSW3223DCL) |Request or Install License Keyand click on the
The NAG Response Centre will send you the Kusari license key by email.
A short term (demonstration or trial) license key contains one or more lines like the following:
FSW3223DC TRIAL 2010/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL. Longer term license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys include the word NODE instead of the word TRIAL above.
Once you have obtained one of the above license keys, the Kusari
Installer program may be used to install the key in the Windows
Registry. Paste the key into the edit box on the main Kusari
Installer dialog and then click on the
The khostid command may be found in the
klreg FSW3223DC license.datOtherwise the key can be installed for the current user,
klreg /current_user FSW3223DC license.dat
The environment variable may be set from the Control Panel.
The A00ACF example program may be used to check the license is properly installed or the diagnostic program NAG_Fortran_DLL_info.exe can be used to check both accessibility and licensing (see Section 4.2.3).
Alternatively, run the diagnostic program NAG_Fortran_DLL_info.exe which itself calls A00AAF (see Section 4.2.3).
C:\Program Files\NAG\FS23\fsw3223dcl\diagnosticsmay be used to check whether the DLL FSW3223DC.dll is accessible from the current environment. If this program is started from Windows Explorer or from the
Start|All Programs|NAG|FS23|NAG Library for SMP and Multicore (FSW3223DCL) |Check NAG DLL Accessibility (FSW3223DCL)shortcut on the Start Menu, the DLL will be found if the global PATH environment variable has been set to include its location. If it is run from a Command Prompt window, then the environment local to that window will prevail. (See Section 3.1.1 of the Users' Note for more information on environment variables.)
If it loads the DLL successfully, NAG_Fortran_DLL_info.exe will print the location of the DLL, and the implementation details as provided by a call to the routine A00AAF. It also calls A00ACF to check the availability of a valid license key and reports if this is not found; "Status OK" indicates that a valid key was either found or not required.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference or account number and NAG product code (in this case FSW3223DCL).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: email@example.com Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 801 Warrenville Road Suite 185 Lisle, IL 60532-4332 NAG Inc Response Center USA email: firstname.lastname@example.org Tel: +1 630 971 2337 Tel: +1 630 971 2337 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Nihon NAG Response Centre Japan email: email@example.com Tel: +81 3 5542 6311 Tel: +81 3 5542 6311 Fax: +81 3 5542 6312 Fax: +81 3 5542 6312 NAG Taiwan Branch Office 5F.-5, No.36, Sec.3 Minsheng E. Rd. Taipei City 10480 NAG Taiwan Response Centre Taiwan email: firstname.lastname@example.org Tel: +886 2 25093288 Tel: +886 2 25093288 Fax: +886 2 25091798 Fax: +886 2 25091798