Your attention is drawn to the terms and conditions of the Software License regarding the use of NAG software. Requests for information about the availability of other implementations must be referred to NAG.
This implementation is a compiled, tested, ready-to-use version of the NAG Library for SMP & Multicore that is considered suitable for operation on the computer systems detailed below:
hardware: IBM POWER7 systems operating system: AIX 7.1 and compatible Fortran compiler: IBM XLF version 126.96.36.199 and compatible vendor library: IBM ESSL version 188.8.131.52 and compatibleThis implementation is not compatible with previous versions of XLF (i.e. XLF 12 and earlier).
The shared library is only recommended for use with the exact compiler version used to create this implementation (IBM XLF version 184.108.40.206). If this is not the default compiler installation on your system, the environment variable LD_LIBRARY_PATH must be set to point to the library directory of the IBM XLF version 220.127.116.11 installation. Given this compatibility issue, users are recommended to use the static library whenever possible.
This implementation was produced at the Information Initiative Center, Hokkaido University (by NAG Ltd. staff) on the computing system detailed below:
hardware: IBM POWER7 operating system: AIX 7.1 Fortran compiler: IBM XLF version 18.104.22.168 vendor library: IBM ESSL version 22.214.171.124 compiler options: -q64 -qarch=pwr7 -qtune=pwr7 -qnosave -qthreaded -qxlf77=nopersistent:leadzero -qzerosize -qsmp=omp
The library can be used with or without the compiler flag -qextname.
Each routine in the NAG Library for SMP & Multicore, Mark 23, was compiled with the highest level of optimization that enabled the functionality provided by the library to be verified and validated. Most routines in the library were compiled with the optimization flag -O3 ; some routines will have been compiled with a lower level of optimization when necessary.
In this implementation:
Please check the following URL:
for details of any new information related to the applicability or usage of this implementation.
|- doc -|- in.html (Installer's Note, (this document)) | |- un.html (Users' Note) | | |- libnagsmp.a (static library requiring |- lib -| vendor BLAS/LAPACK) | |- libnagsmp.so (shareable library requiring | vendor BLAS/LAPACK) fsai623dal -| |- nag_interface_blocks -|- * | | |- source --|- ??????e.f90 | | |- examples -|- data ----|- ??????e.d | | |- ??????e.opt | | | |- results -|- ??????e.r | |- scripts -|- nagsmp_example | |- nagsmp_example_shar | | |- bin -|- * (directories of binaries | | for supported platforms) |- license -|- README.TXT | |- doc -|- * (End User Guide)
The following shows the directory/file organization of the Library Manual materials as they will be installed.
nagdoc_fl23 -|- index.html | |- examples -|- baseresults -|- ??????*.r | |- source -|- ??????*.f90 | |- data -|- ??????*.d | |- ??????*.opt | |- html -|- FRONTMATTER -|- manconts.html (main HTML index) | | |- *.html (foreword & copyright) | | | |- [A00-X05] -|- *conts.html (chapter contents) | | | |- GENINT -|- *.html (general introductory material) | | | |- INDEXES -|- GAMS -|- gams.html (GAMS index) | | | |- *.html (GAMS files) | | | | | |- KWIC -|- kwic.html (KWIC index) | | |- *.html (KWIC files) | | | |- styles -|- libdoc.css (main CSS stylesheet) | |- pdf -|- FRONTMATTER -|- manconts.pdf (NAG copyright and | | | main pdf page) | | |- foreword.pdf (NAG foreword) | | | |- [A00-X05] -|- *conts.pdf (chapter contents) | | |- *intro.pdf (chapter introduction) | | |- *f.pdf (routine documents) | | | |- GENINT -|- *.pdf (general introductory material) | | | |- INDEXES -|- *.pdf (bookmarked file containing links | | to kwic.xml and gams.xml) | | | |- INUNS -|- usersnote.pdf (implementation-specific | details) | |- xhtml -|- FRONTMATTER -|- manconts.xml (main XHTML index) | |- *.xml (foreword & copyright) | |- [A00-X05] -|- *conts.xml (chapter contents) | |- figures -|- *.png (figures and plotfiles) | |- GENINT -|- *.xml (general introductory material) | |- INDEXES -|- GAMS -|- gams.xml (GAMS index) | | |- *.xml (GAMS files) | | | |- KWIC -|- kwic.xml (KWIC index) | |- *.xml (KWIC files) | |- styles -|- libdoc.css (main CSS stylesheet) |- nagmathml.css (MathML stylesheets) |- pmathml.css
Library software: 495 MB Library Manual: 850 MB
gunzip fsai623dal.tgz tar xvf fsai623dal.tarThis will extract the files install.sh, fs23.tar, lic_agr.txt, in.html and un.html.
If you have downloaded the Library Manual as a tar gzip file (mk23_doc.tgz) run the command
gunzip mk23_doc.tgzto extract the file mk23_doc.tar.
./install.shIf you are logged in as root then by default, the materials will be installed in /opt/NAG/ or /usr/local/NAG/ depending on your system. However, you may choose a different location. In this document we refer to the directory /opt/NAG/fsai623dal or /usr/local/NAG/fsai623dal as [INSTALL_DIR]. This convention is also used in the Users' Note (un.html).
The directory [INSTALL_DIR]/scripts contains two scripts to show how to use the pre-compiled modules and the libraries provided with this implementation. See Users' Note, Section 3.3. Subsequent to the installation, if you move this product to some other location then these scripts must be changed to reflect that fact.
The install script can install the Library Manual in the same location as the NAG Library material or at some other location of your choice.
You may wish to move the Library Manual to the same location as that for other NAG products. You are encouraged to make it readily available to users.
In order to enable the software, NAG will issue you with a license key. The license key is contained in a text file consisting of details of the software that will be enabled.
To request a license key, run the program khostid located in the license/bin/aix64/ subdirectory of the software distribution. This utility must be run from a command prompt. Return the information that it displays, together with the product code (in this case FSAI623DAL), by e-mail (or FAX) to NAG. Alternatively, direct the output from this utility to a file and send both the file and the product code to NAG.
A short term (demonstration or trial) license key contains one or more lines like the following:
FSAI623DA TRIAL 2011/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL. Longer term license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys include the word NODE instead of the word TRIAL above.
Once you have obtained one of the above license keys, the easiest way to install it is to store the text in a file,
/usr/local/NAG/nag.keyThe license software in this implementation automatically looks for these particular files and reads the first one found, so no other action is necessary. Alternatively, store the license in a file with a name and location of your choice, say,
[INSTALL_DIR]/license.lic.The location of the license file, if it is not one of the default places listed above, must be made known to the NAG application by setting the environment variable NAG_KUSARI_FILE to the full pathname of the file before the application is invoked.
For example, in the C-shell, type:
setenv NAG_KUSARI_FILE [INSTALL_DIR]/license.licor in the Bourne shell, type:
NAG_KUSARI_FILE=[INSTALL_DIR]/license.lic export NAG_KUSARI_FILE
Further details about Kusari and how it may be configured to suit your local circumstances (e.g. how to install the license key on a server) are included in the Kusari License Management documentation in the license/doc/ subdirectory of the software distribution. See also the Kusari FAQ:
The following material should also be made accessible to users:
The nagdoc_fl23 directory contains the Library Manual.
libnagsmp.a libnagsmp.sointerface block files:
nag_interface_blocks/*example program material:
examples/source/??????e.f90 examples/data/??????e.d examples/data/??????e.opt examples/results/??????e.r scripts/nagsmp_example scripts/nagsmp_example_shar
Note that the example material has been adapted, if necessary, from that published in the Library Manual, so that programs are suitable for execution with this implementation with no further changes (but see Section 3.3 of the Users' Note for comments about possible differences in results obtained). Making the example material directly available to users provides them with easily adaptable templates for their own problems.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference or account number and NAG product code (in this case FSAI623DAL).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: firstname.lastname@example.org Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 801 Warrenville Road Suite 185 Lisle, IL 60532-4332 NAG Inc Response Center USA email: email@example.com Tel: +1 630 971 2337 Tel: +1 630 971 2337 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Nihon NAG Response Centre Japan email: firstname.lastname@example.org Tel: +81 3 5542 6311 Tel: +81 3 5542 6311 Fax: +81 3 5542 6312 Fax: +81 3 5542 6312 NAG Taiwan Branch Office 5F.-5, No.36, Sec.3 Minsheng E. Rd. Taipei City 10480 NAG Taiwan Response Centre Taiwan email: email@example.com Tel: +886 2 25093288 Tel: +886 2 25093288 Fax: +886 2 25091798 Fax: +886 2 25091798