Your attention is drawn to the terms and conditions of the Software License regarding the use of NAG software. Any request to use this software other than on the licensed computer must be referred to NAG, as should requests for information about the availability of other implementations.
hardware: Intel-based Mac 64-bit systems operating system: Mac OS X version 10.4.11 and compatible (including 10.5.1) Fortran compiler: Intel(R) Fortran Compiler for Intel(R) 64, Version 10.1 Build 20071116 Package ID: m_fc_p_10.1.007 and compatible
hardware: Apple iMac5.1 - 2GHz intel Core 2 Duo operating system: Mac OS X version 10.4.11 Darwin Kernel Version 8.11.1 Fortran compiler: Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 10.1 Build 20071116 Package ID: m_fc_p_10.1.007This implementation has been tested at NAG Ltd., Oxford on the computing system detailed below:
hardware: Apple iMac5.1 - 2GHz intel Core 2 Duo operating system: Mac OS X version 10.5.1 Darwin Kernel Version 9.1.0 Fortran compiler: same as aboveThe entire NAG Fortran Library, Mark 21, was compiled with full optimization (-O4). This library has been tested using the Basic Linear Algebra Subprograms (BLAS) and linear algebra routines (LAPACK) provided by NAG (see the Chapter Introductions for F06, F07 and F08 in the NAG Mark 21 Library Manual, which we will refer to as the Library Manual).
The product has also been tested with version 10.0 update 1 of the Intel ® Math Kernel Library (MKL). The required libraries of this version of MKL (Package ID: m_mkl_10.0.1.014) are supplied as a part of this product (see contents).
|- doc -|- in.html (Installer's Note, (this document)) | |- un.html (Users' Note) | | |- libnag_nag.a (static self-contained library | | including NAG BLAS/LAPACK) |- lib -|- libnag_nag.dylib (dynamic self-contained library | | including NAG BLAS/LAPACK) | |- libnag_mkl.a (static library requiring | | MKL BLAS/LAPACK) | |- libnag_mkl.dylib (dynamic library requiring | MKL BLAS/LAPACK) flmi621dcl -| |- nag_interface_blocks -|- * | | |- source --|- ??????e.f |- examples -|- data ----|- ??????e.d | |- results -|- ??????e.r | |- scripts -|- nag_example* | |- mkl_em64t -|- * (Intel Math Kernel Library) | | |- bin -|- * (directories of binaries | | for supported platforms) |- license -|- README.TXT | |- doc -|- * (End User Guide)
libnag_mkl.a and libnag_mkl.dylib do not contain the NAG version of Basic Linear Algebra Subprograms (BLAS) nor the linear algebra functions (LAPACK). Both have been tested with the BLAS/LAPACK provided by the Intel ® Math Kernel Library 10.0 update 1 for Mac OS (MKL) which is included in this product. Please see the Intel web site for further information about MKL (http://www.intel.com/software/products/mkl).
The following shows the directory/file organization of the Library Manual as they will be installed.
nagdoc_mk21 -|- examples -|- baseresults -|- ??????*.r | |- source -|- ??????*.f | |- data -|- ??????*.d | | |- html -|- mark21.html (main HTML index) | | | |- [A00-X05] -|- *conts.html (chapter contents) | | | |- frontmatter -|- *.html (foreword & copyright) | | | |- genint -|- *.html (general introductory material | | and online help document) | | | |- indexes -|- gams -|- fl_gams.html (GAMS index) | | | |- *.html (GAMS files) | | | | | |- kwic -|- fl_kwic.html (KWIC index) | | |- *.html (KWIC files) | | | |- styles -|- libdoc.css (main CSS stylesheet) | |- pdf -|- frontmatter -|- mark21.pdf (NAG copyright and main | | pdf page) | |- foreword.pdf | |- [A00-X05] -|- *conts.pdf (chapter contents) | |- *intro.pdf (chapter introduction) | |- *f.pdf (routine documents) | |- genint -|- *.pdf (general introductory material | and online help document) | |- indexes -|- *.pdf (bookmarked file containing links | to fl_kwic.html and fl_gams.html) | |- INUNs -|- *.pdf (implementation specific note)
compiled libraries: libnag_nag.a 26.9 Mb libnag_nag.dylib 20.9 Mb libnag_mkl.a 26.6 Mb libnag_mkl.dylib 20.8 Mb interface blocks: 4.2 Mb MKL (10.0 update 1) 64-bit libraries 94.2 Mb example program material: 14.6 Mb scripts: 10.0 Kb implementation specific documentation: 52.0 Kb Library Manual: 226.1 Mb licensing materials 5.4 Mb
By default, the Library Software will be installed in /opt/NAG/. As the installer, you may wish to choose a different location. In this document we refer to the directory /opt/NAG/flmi621dcl or the directory specified by the installer as [INSTALL_DIR].
The directory [INSTALL_DIR] is referenced in the Users' Note (un.html).
The directory [INSTALL_DIR]/scripts contains one or more scripts to show how to use the libraries provided with this implementation. See Users' Note, Example Programs. Subsequent to the installation, if the installer moves the library to some other location then these scripts must be changed to reflect that fact.
To simplify access to the libraries you may wish to create symbolic links in a system location such as /usr/lib pointing at the installed libraries. They would then be in the default search path of the linker during the link phase, and be available for execution at run time.
The NAG Fortran Library Interface Blocks define the type and arguments of each user callable NAG Fortran Library routine. These are not essential to calling the NAG Fortran Library from Fortran 90/95 programs. Their purpose is to allow the Fortran 90/95 compiler to check that NAG Fortran Library routines are called correctly.
The interface block files (nag_interface_blocks/*) are supplied in both source form and pre-compiled module form.
The -Ipathname option should then be specified on each f90/f95 invocation (where pathname is [INSTALL_DIR]/nag_interface_blocks) to tell the compiler where to find the modules.
By default, the Library Manual will be installed in /opt/NAG/ however it can be installed to some other location of the installer's choice. For example you may wish to install the Library Manual in the same location as that for other NAG products. You are encouraged to make it readily available to users.
A short term (demonstration or trial) license key contains one or more lines like the following:
FLMI621DC TRIAL 2007/11/10 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL. Longer term license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys include the word NODE instead of the word TRIAL above.
In order to enable the software, NAG will issue you with a license key. The license key is a simple text file containing details of the software that will be enabled.
License key request and installation is performed through the Apple Installer when flmi621dcl.pkg is installed. During installation, you will be prompted for a license key. If you do not have a license key, a request form will be generated for you to complete and send to NAG via fax or e-mail.
Once you have obtained one of the above license keys you can enter it into the installer. By default, the installer will save the license key in /opt/NAG/nag.key (prepends the file if it exists). The Library will then validate the license at runtime.
If you need to update or change the license key after installation, we recommend that you run the installer again.
Further details about Kusari and how it may be configured to suit your local circumstances are included in the Kusari License Management documentation in the license/doc/ subdirectory of the installation directory [INSTALL_DIR] (see Section 3.1).
The following material should also be made accessible to users:
The nagdoc_mk21 directory contains the Library Manual. This should be made available to users.
libnag_nag.a libnag_nag.dylib libnag_mkl.a libnag_mkl.dylibinterface block files:
nag_interface_blocks/*example program material:
examples/source/??????e.f examples/data/??????e.d examples/results/??????e.r scripts/nag_example*
Note that the example material has been adapted, if necessary, from that published in the Library Manual, so that programs are suitable for execution with this implementation with no further changes (but see Section 4.3.1 for comments about possible differences in results obtained). Making the example material directly available to users provides them with easily adaptable templates for their own problems.
The installer should ensure that the advice given to users in Section 3.1 of the Users' Note (un.html) is suitable for the installation. This can be done by running a few example programs following that advice. The installation can also be tested using the scripts nag_example*.
On-line documentation is bundled with this implementation. Please see Section 4.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference and NAG product code (in this case FLMI621DCL).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:
http://www.nag.co.uk/, http://www.nag.com/ or http://www.nag-j.co.jp/
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: firstname.lastname@example.org Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 1431 Opus Place, Suite 220 Downers Grove IL 60515-1362 NAG Inc Response Center USA email: email@example.com Tel: +1 630 971 2337 Tel: +1 630 971 2337 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Japan email: firstname.lastname@example.org Tel: +81 (0)3 5542 6311 Fax: +81 (0)3 5542 6312